Box mod list is now open for orders

[Super-Shiny]

Feb 17, 2014 19:23:23 GMT blakey said:

Hoxton
I'm just watching my 21 route running through that crap hole


.

Bet you are

[blakey]

Feb 17, 2014 19:40:37 GMT Super-Shiny said:

Feb 17, 2014 19:23:23 GMT blakey said:

Hoxton
I'm just watching my 21 route running through that crap hole


.

Bet you are

Nah, I'm safely tucked away in bexleyheath today
GPS and bus tracking systems have their uses

[Super-Shiny]

VapeKingMikes
Dunny
striker42
Steve (VapeStorm)
blakey
seniorphil
Chefs Flavours Lew
otter
norfolkphil

Not 100% if i can do it but would you mind if the USB board was at the bottom of the mod rather than on the front face? if it was at the bottom it would not be center more to the right/bottom of the mod?

[Steve (VapeStorm)]

Sounds good to me Super-Shiny

[seniorphil]

I'm easy, whichever is easiest.

[Steve (VapeStorm)]

Second thought on it, when putting the mod down wouldnt grit dust etc get into the plug easier if it was on the bottom?

[Super-Shiny]

I am just thinking if i can get away with it would be:

One: it would be easier to do
Two: I think it will look more classy that the front and back would be clean/bare of any holes.

Not 100% sure i can do it yet.

[Super-Shiny]

Feb 17, 2014 20:49:04 GMT Steve (VapeStorm) said:

Second thought on it, when putting the mod down wouldnt grit dust etc get into the plug easier if it was on the bottom?

The connector is recessed by about 1.5mm so unless you place the mod into something deep like liquid (which you would not do anyway, bloody hope not ) it should not touch the connector, you have a good point though.

[norfolkphil]

Where ever is easiest for you.

[Deleted]

Not really bothered where it is, as long as it has one

[blakey]

Front or back would mean that you wouldn't have to lay the unit down to recharge it, if you had it in the base then any drippers or gennies would have to be removed before each recharge.
In this case I think functionality trumps aesthetics

[arron]

Feb 17, 2014 19:38:25 GMT Super-Shiny said:

Feb 17, 2014 19:09:15 GMT striker42 said:

OK, The Rome SVB
Shiny's
Vaping
Baby

Loving that, that's what it will be called "The Rome SVB"....love it

If you wish to engrave them, I have a brand new engraving kit....all the heads for wood,plastic,metal and glass!
you are more than welcome to borrow it for as long as you require, I don't want anything in return just post it back when you no longer need it:)

[Chefs Flavours Lew]

I'm happy either way but if I had to pick I would say the bottom.

[dagl]

Feb 17, 2014 22:23:38 GMT Chefs Flavours Lew said:

I'm happy either way but if I had to pick I would say the bottom.

Gotta disagree with this!, but I've not read the thread.... 

[Super-Shiny]

Feb 17, 2014 22:00:25 GMT blakey said:

Front or back would mean that you wouldn't have to lay the unit down to recharge it, if you had it in the base then any drippers or gennies would have to be removed before each recharge.
In this case I think functionality trumps aesthetics

Good thinking Sherlock

And there is me saying you have to think ahead all the time, missed that one.

Gonna try and stick them at the back instead of the front, won't be able to tell until the battery holders are with me tomorrow.