Orieco Storm RDA, anyone used one? looks similar to origen

[boyofford]

Apr 9, 2014 16:04:28 GMT Steve (VapeStorm) said:

No idea im waiting for confirmation from billy. Love the dripper dont think im goingnto buy any othermdrippers now. Im getting great flavour and vapour very satisfying, just had a quick look at the 3d its abit rough round the edges burrs where the airhole has been drilled/pressed air flow isnt gre at but saw a video on youtube last noght where someone drilled out the air control ring and improved it massively. Goimg to do a build later and do a write up, cant build on video lol

lol, I waas convinced I had every thing I ever wanted a few weeks ago.....then went on a spending spree.....this forum is expensive!

My 3d had burrs too, and the bit that pushes down was dam stiff, might of improved with eliquid.
Some of my airholes wern't even drilled through!

[enjay]

Apr 9, 2014 17:21:12 GMT boyofford said:

Apr 9, 2014 16:53:17 GMT enjay said:

Mine will be here by Friday lol

www.ebay.co.uk/itm/2-x-GENUINE-Sony-US18650VTC4-2100mAh-HIGH-DRAIN-30A-IMR-Hybrid-Batteries-/181367140150?ssPageName=ADME:L:OC:GB:3160

VTC4's, 2100 mAh

SulkingI got 4 for that price

I only use the sonys for all sub ohms now, still hit harder at 0.7ohms than 10amp batteries.

Impatience does cost extra lol

[Steve (VapeStorm)]

Best vape so far. Orieco on nemmy, 2 1ohm 1.5mm microcoils 8 wraps .34. Wicked lightly with cotton. A cloud chasers wet dream!! Vapour is dense and flavour is huge!!

also set up the 3d, the pump action loosens alot when juice is added. The two air holes are too restricted for dual coils but ill fix that tomorrow by drilling another 1.5mm hole in the air control ring. So at the moment ive got it set up with a 1ohm 1.5mm coil 8 wraps .34. With cotton and it vapes great with the single airhole. When I got it it stank of machine oil so gave it a rinse. Still a slight hint of it still when vaping so tomorrow im going to find out how to fully strip it down and give it a thorough cleaning. Looks great in hybrid with the nemmy if only the nemmy was ss lol

[boyofford]

Apr 9, 2014 23:22:10 GMT Steve (VapeStorm) said:

Best vape so far. Orieco on nemmy, 2 1ohm 1.5mm microcoils 8 wraps .34. Wicked lightly with cotton. A cloud chasers wet dream!! Vapour is dense and flavour is huge!!

also set up the 3d, the pump action loosens alot when juice is added. The two air holes are too restricted for dual coils but ill fix that tomorrow by drilling another 1.5mm hole in the air control ring. So at the moment ive got it set up with a 1ohm 1.5mm coil 8 wraps .34. With cotton and it vapes great with the single airhole. When I got it it stank of machine oil so gave it a rinse. Still a slight hint of it still when vaping so tomorrow im going to find out how to fully strip it down and give it a thorough cleaning. Looks great in hybrid with the nemmy if only the nemmy was ss lol

So the 3D is ok...I maybe didn't really give it a chance.
It's pretty easy to dismantle, from memory you just turn the whole bit in the inside middle then it just pops open....well it should, mine was kinda stuck and I had to pull it out. Worth cleaning as was gunk in bottom bit of mine.

[boyofford]

And you'll ruin your coils taking it out as its the negative posts bar that you spin to unscrew and release inner springy base.

Sorry finding this hard to describe from memory, not knowing what to call the bits!

[Steve (VapeStorm)]

Lol cheers mate, ill figure it out and yeah you really didnt give it a chance. It has its flaws like the mossing afc hole which im going to have to drill and the burrs and machine oil but its absolutely solid and serves its purpose

[Steve (VapeStorm)]

enjay tell the nice people about the coil I told you to make lol

[enjay]

Apr 10, 2014 1:40:00 GMT Steve (VapeStorm) said:

enjay tell the nice people about the coil I told you to make lol

Lol

Speaking to him^^^ on FB last night, he suggested a build to try out on the origen, dual coils, each with 8 wraps on a 1.5mm bit using .34mm kanthal. I used a 14 gauge needle, 1.6mm. Thing vapes like a cloud machine! I had to open a window in the end lol.

[boyofford]

Apr 10, 2014 2:00:37 GMT enjay said:

Apr 10, 2014 1:40:00 GMT Steve (VapeStorm) said:

enjay tell the nice people about the coil I told you to make lol

Lol

Speaking to him^^^ on FB last night, he suggested a build to try out on the origen, dual coils, each with 8 wraps on a 1.5mm bit using .34mm kanthal. I used a 14 gauge needle, 1.6mm. Thing vapes like a cloud machine! I had to open a window in the end lol.

Nice, what ohms is that?

[enjay]

Apr 10, 2014 6:54:05 GMT boyofford said:

Apr 10, 2014 2:00:37 GMT enjay said:

Lol

Speaking to him^^^ on FB last night, he suggested a build to try out on the origen, dual coils, each with 8 wraps on a 1.5mm bit using .34mm kanthal. I used a 14 gauge needle, 1.6mm. Thing vapes like a cloud machine! I had to open a window in the end lol.

Nice, what ohms is that?

I'll tell you tomorrow when my ohm reader arrives lol




Steve's was coming up at 0.5 ohms so I think mine must be like 0.6 or so seeing as I used a bigger thing for winding.

[Steve (VapeStorm)]

Yours will defo be a little higher enjay ive got my coils tucked up as close as I can to the negative screws.

[enjay]

Yeh but I'm more of an optimist and hang by the positive vibes

[Steve (VapeStorm)]

Drilled out the 3d and wow what a difference! All I did was increase the size of the holes already in the afc ring to 1.5mm. Its not as good as the orieco but its still a very acceptable vape

[jcol]

Apr 10, 2014 6:54:05 GMT boyofford said:

Apr 10, 2014 2:00:37 GMT enjay said:

Lol

Speaking to him^^^ on FB last night, he suggested a build to try out on the origen, dual coils, each with 8 wraps on a 1.5mm bit using .34mm kanthal. I used a 14 gauge needle, 1.6mm. Thing vapes like a cloud machine! I had to open a window in the end lol.

Nice, what ohms is that?

Going by luc.bigjohn's resistance program, 8 wraps of 0.34 around a 1.6mm needle with each leg at 2mm, 1 coil should be about 0.84oHms, so dual coil will be 0.42ohms.
4mm legs will be about 0.9/0.45
I wonder if i am any where near it lol

At home, i only use the Storm now, with 1 air hole exposed, great flavour and nic hit, so much so, i have had to do a few of my mixes at 6mg as it hits so hard

[enjay]

I tested that thing out last night jcol, it was miles out lol