iTaste vv3, not getting Kanger tanks to work.

[fizzybubbs]

Kanger ProTank Mini 2 and Pro Tank 3 suddenly not working with iTaste vv3, were both working originally, both work with eGo.  Any ideas much appreciated.

Thanks in advance.

[Clivia]

hi fizzybubbs - check that the coils are screwed in properly and try to raise the center pin gently

[charon]

Yup sounds as if the iTaste vv3 has had the centre pin pushed down. Very,very gentle try to lift it a little.

[smarties]

Yep that'll be the problem, just had to raise the pin on my MVP 2, give it a good clean first I use a baby wipe, then using a small (jewellers) screwdriver work around the centre pin gently easing it up a couple of mm, then try the atty again, also make sure the coil head is screwed down in the base of the tank properly.

[fizzybubbs]

Thanks all, it seems to be fixed. Cotton bud and a gentle push of the pin.