intheblim
Full Member
Joined:April 2014
Posts: 135 
Location:
Likes: 31
Recent Posts
Last Online Sept 17, 2014 19:12:02 GMT
|
Post by intheblim on May 11, 2014 18:59:00 GMT
Hi im building coils for my zmax v5 and when i test them on the usb ohm tester they are reading 1.9ohm but when i put it on my zmax its saying "low load" can anyone tell me what im doing wrong - im using 0.25 kanthal with cotton wool at 6 to 7 wraps ?
|
|
Super-Shiny
Super Member
SUSPENDED
Joined:January 2013
Posts: 13,131
Location:
Likes: 10,308
Recent Posts
Last Online Nov 25, 2014 19:31:22 GMT
|
Post by Super-Shiny on May 11, 2014 19:02:02 GMT
You might be screwing the atty on too hard on the zmax and causing a connection problem.
|
|
Roscopecotrain
Super Member
Perverted Pink Passion
Joined:January 2013
Posts: 11,785
Location:
Likes: 7,418
Recent Posts
Last Online Dec 6, 2023 21:16:47 GMT
|
Post by Roscopecotrain on May 11, 2014 19:02:26 GMT
Low load usually means your battery is low on the zmax.
Maybe a short somewhere. Try loosening the atty off a bit and try that or lifting the pin slightly on the zmax.
|
|
Roscopecotrain
Super Member
Perverted Pink Passion
Joined:January 2013
Posts: 11,785
Location:
Likes: 7,418
Recent Posts
Last Online Dec 6, 2023 21:16:47 GMT
|
Post by Roscopecotrain on May 11, 2014 19:03:56 GMT
|
|
intheblim
Full Member
Joined:April 2014
Posts: 135
Location:
Likes: 31
Recent Posts
Last Online Sept 17, 2014 19:12:02 GMT
|
Post by intheblim on May 11, 2014 19:07:47 GMT
Low load usually means your battery is low on the zmax. Maybe a short somewhere. Try loosening the atty off a bit and try that or lifting the pin slightly on the zmax. how do i lift the pin i dont want to ruin it ? |
|
Roscopecotrain
Super Member
Perverted Pink Passion
Joined:January 2013
Posts: 11,785
Location:
Likes: 7,418
Recent Posts
Last Online Dec 6, 2023 21:16:47 GMT
|
Post by Roscopecotrain on May 11, 2014 19:11:40 GMT
Low load usually means your battery is low on the zmax. Maybe a short somewhere. Try loosening the atty off a bit and try that or lifting the pin slightly on the zmax. how do i lift the pin i dont want to ruin it ? Just get a small flat head screw driver between the pin and the zmax and gently nudge the pin up. Move it round a bit and nudge again. Just do a few times to lift the pin just a slight amount. I have issues with my pro tank 2's on my zmax not making a connection. Now use an airflow controller to combat it. |
|
Super-Shiny
Super Member
SUSPENDED
Joined:January 2013
Posts: 13,131
Location:
Likes: 10,308
Recent Posts
Last Online Nov 25, 2014 19:31:22 GMT
|
Post by Super-Shiny on May 11, 2014 19:13:41 GMT
|
|
intheblim
Full Member
Joined:April 2014
Posts: 135
Location:
Likes: 31
Recent Posts
Last Online Sept 17, 2014 19:12:02 GMT
|
Post by intheblim on May 11, 2014 19:14:13 GMT
how do i lift the pin i dont want to ruin it ? Just get a small flat head screw driver between the pin and the zmax and gently nudge the pin up. Move it round a bit and nudge again. Just do a few times to lift the pin just a slight amount. I have issues with my pro tank 2's on my zmax not making a connection. Now use an airflow controller to combat it. Yep that was the problem all sorted - happy man again  |
|
Roscopecotrain
Super Member
Perverted Pink Passion
Joined:January 2013
Posts: 11,785
Location:
Likes: 7,418
Recent Posts
Last Online Dec 6, 2023 21:16:47 GMT
|
Post by Roscopecotrain on May 11, 2014 19:15:01 GMT
Ah yeah forgot about that. Here it is. Same principle. How to fix an Ego battery. (Soulvapes Reviews): |
|
Roscopecotrain
Super Member
Perverted Pink Passion
Joined:January 2013
Posts: 11,785
Location:
Likes: 7,418
Recent Posts
Last Online Dec 6, 2023 21:16:47 GMT
|
Post by Roscopecotrain on May 11, 2014 19:15:33 GMT
Just get a small flat head screw driver between the pin and the zmax and gently nudge the pin up. Move it round a bit and nudge again. Just do a few times to lift the pin just a slight amount. I have issues with my pro tank 2's on my zmax not making a connection. Now use an airflow controller to combat it. Yep that was the problem all sorted - happy man again Sweet all sorted. Vape on. |
|
