Suggestion: How to identify Microcoiled + CW heads

[DiscoDes]

So, I have about 50 (yes 50) ProTank heads sat here.

Some have been done with microcoils and some a "stock"

It occurred to me "How am I going to tell which ones I've done with CW & MC at a glance?"

So here's what I now do:



I cut a notch in the rubber grommet.

The 2 on the left are CW+MC, the 2 on the right are "stock"

Simples!

[fiddles]

kept separate in two tubs (no need to weaken grommet)
even more Simples

[DiscoDes]

May 21, 2014 17:08:24 GMT fiddles said:

kept separate in two tubs (no need to weaken grommet)
even more Simples

Granted; but I have heads with normal/silica wicks as well as MC + CW that I bung in a tub when I change them, the way I do it means that I know which ones to MC+CW when I get round to it!

[sammy13]

Great advice DiscoDes I have actually lost 2 microcoils that were done for me, because I just dismantled them without checking In fact I may have lost 4

I keep mine separate, under 2 ohm and 2 and over, never thought to separate the microcoils

[Di]

Good idea DiscoDes!

I found that I was getting them mixed up too, so, now for the M&C I just turn the grommet upside down, (both on the newly done and spent,) but reverse again when put into the tanks, works for me.