help with new zmax ?

[intheblim]

Hi i have bought a zmax v5 and every coil i put on it weather its built by myself or a new coil just gurgles after about 5 puffs - i have tried everything i can think of and still the same - the battery is fully charged and still i get gurgling - could this be a problem with zmax which i have set at 8 watts - im on the brink of giving up here

[Super-Shiny]

Don't think it is the Zmax as it's just a supplier of electricity to the atty, sounds like the atty is flooding.

[Roscopecotrain]

Agree with Super-Shiny. Has to be the atty, the zmax wont cause an atty to flood.

What atty are you using?

[dagl]

Different juice maybe..?
might have been a mishap in da mix..

[Super-Shiny]

As Roscopecotrain says what are you using:

Atty?
Ratio of juice? VG/PG
What coiling method you using?

I have noticed a lot of your posts and it seems you are having a hard time, don't give up m8, we can help you through these problems.

[intheblim]

I have tried a aerotank - brand new iclear 30 and a kangertech td3 - but when i put them on my wifes mvp they work fine with no gurgling - im using 0.25 kanthal with cotton 

[Super-Shiny]

May 23, 2014 20:19:56 GMT intheblim said:

I have tried a aerotank - brand new iclear 30 and a kangertech td3 - but when i put them on my wifes mvp they work fine with no gurgling

What ohms are the heads reading? maybe the zmax is too low in watts compared to the MVP so you maybe simmering the juice as opposed to boiling the juice.

[Roscopecotrain]

Whack the watts up and see what happens.

[intheblim]

May 23, 2014 20:22:25 GMT Super-Shiny said:

May 23, 2014 20:19:56 GMT intheblim said:

I have tried a aerotank - brand new iclear 30 and a kangertech td3 - but when i put them on my wifes mvp they work fine with no gurgling

What ohms are the heads reading? maybe the zmax is too low in watts compared to the MVP so you maybe simmering the juice as opposed to boiling the juice.

some coils im using are 1.9 and some are 2.3 

[intheblim]

May 23, 2014 20:23:32 GMT Roscopecotrain said:

Whack the watts up and see what happens.

i only wack the watts to 8.5 as the chart says i can only go to that - what would you recommend ?

[Super-Shiny]

May 23, 2014 20:23:34 GMT intheblim said:

May 23, 2014 20:22:25 GMT Super-Shiny said:

What ohms are the heads reading? maybe the zmax is too low in watts compared to the MVP so you maybe simmering the juice as opposed to boiling the juice.

some coils im using are 1.9 and some are 2.3 

8 watts is too low for them heads, up the watts slowly.

[intheblim]

May 23, 2014 20:26:46 GMT Super-Shiny said:

May 23, 2014 20:23:34 GMT intheblim said:

some coils im using are 1.9 and some are 2.3 

8 watts is too low for them heads, up the watts slowly.

whats the highest i can go to ?

[Roscopecotrain]

May 23, 2014 20:24:26 GMT intheblim said:

May 23, 2014 20:23:32 GMT Roscopecotrain said:

Whack the watts up and see what happens.

i only wack the watts to 8.5 as the chart says i can only go to that - what would you recommend ?

Same as Super-Shiny says get the watts up. I vape at 10 or 11 watts so start at 10 and see how you go. Keep turning up slowly until it tastes burnt then as soon as it does back it off a touch and boom there is your sweet spot. Vape away.

[Super-Shiny]

Forgot to mention, forget the charts intheblim i have

[Roscopecotrain]

May 23, 2014 20:28:02 GMT intheblim said:

May 23, 2014 20:26:46 GMT Super-Shiny said:

8 watts is too low for them heads, up the watts slowly.

whats the highest i can go to ?

Highest you can go to is whatever your mod can go to, screw the chart up and just go on the taste in your mouth mate. Everybody is different so the chart means sh@t.