RBA for a spinner II

[csmith10]

Hi
Well I'm getting somewhat fed up with stock coils, particularly the aspire BDC's as I've had a few recently that only last 24hrs before losing their wicking efficiency leading to burn juice!
So I thought I might look into an RBA which would be suitable for my vision spinner II, I'm not looking at spending much if possible but it seems to be a mine field out there, so far I've seen the AGA S (upgrade) and the mini Phoenix ss.
Can anyone provide opinions on either these or any other budget mini RBA's?

Cheers

[jackcustard]

Im really finding the vision eternity easy to use. From a 3 week newbie

[decoy]

just recoil your old heads if they can be
i is running a protank 3 at 1 ohm with a parallel duel coil and cotton and its surprisingly good
i gota ud agi genesis style attie to play with coils on 1st as you dont need to empty or pull it apart to get to the coil (and enjay was playing with one in his coiling goodness thread)it did look daft on my itaste vv3 so i gota vamo from slowtech
kayfuns are a good tank but a pain to mess with as you have to strip them down to do the coil but idd still say try one at some point

[geordie_vaper]

taifun gs would be good

[Super-Shiny]

Not 100% sure but i don't think you can go lower than 1.3ohms on a spinner or maybe i read somewhere it's not recommended.

I use 1.5ohms on the spinner and all is fine.

[paulymeatballs]

May 28, 2014 6:55:29 GMT Super-Shiny said:

Not 100% sure but i don't think you can go lower than 1.3ohms on a spinner or maybe i read somewhere it's not recommended.

I use 1.5ohms on the spinner and all is fine.

I tested it down to 1.2ohms and it fired no probs. The amp limit is pretty low though.

[Super-Shiny]

May 28, 2014 6:59:52 GMT paulymeatballs said:

May 28, 2014 6:55:29 GMT Super-Shiny said:

Not 100% sure but i don't think you can go lower than 1.3ohms on a spinner or maybe i read somewhere it's not recommended.

I use 1.5ohms on the spinner and all is fine.

I tested it down to 1.2ohms and it fired no probs. The amp limit is pretty low though.

Again, not 100% sure but something in the back of my mind i read somewhere it's best not to go lower than 1.3ohms.......something to do with the strain it has on the battery.

One thing i do remember is that the post was a lot of technical thingy ma jig stuff and went over my head

[Super-Shiny]

I myself would leave extra low ohms to the mech mods as that is what they are good at.

[csmith10]

To be fair I'd be coiling to 1.8-2ohms anyway

[smarties]

csmith10 a mini protank with a Super-Shiny microcoil and cotton works for me, just pull the wick out and put new in when it tastes 

[boyofford]

May 28, 2014 7:51:55 GMT smarties said:

csmith10 a mini protank with a Super-Shiny microcoil and cotton works for me, just pull the wick out and put new in when it tastes 

+1
I couldn't believe how much better the protank mini is with self made coils, not as hard as it looks either.

[csmith10]

I worry about all glass tanks as I'm looking for something I can take anywhere, the new kanger aerotank Mow looks good although I wish their tanks had a larger capacity

[boyofford]

I've never broke a protank mini, dropped many times, though mrs n brother have both managed it so maybe just been lucky.

[cHooBeyDoo]

May 28, 2014 7:59:29 GMT boyofford said:

I couldn't believe how much better the protank mini is with self made coils, not as hard as it looks either.

Me neither - Spinner 2 + Mini Protank 2 + microcoil and cotton wool = My staple vape diet at the moment, FTW