Rebuild Kanger Dual Coil V2

[iLardyboy]

Anyone tried to rebuild the new dual coil heads for the Aerotank Mega? Has any of you been successful and would like to share a tutorial?

[Di]

May 29, 2014 18:05:20 GMT iLardyboy said:

Anyone tried to rebuild the new dual coil heads for the Aerotank Mega? Has any of you been successful and would like to share a tutorial?

I've tried! But it's not easy to do unfortunately     I gave up on trying to open via the top post as you would a normal protank/evod coil and recoiled the aspire way i.e. put a wicked micro coil up through the base, however it leaked! So back to the drawing board for me!

[Super-Shiny]

I got the top of one, you have to be really careful though as they can snap, the inside looks easy though but to be honest getting that centre tube off everytime you want to re-coil it will be a pita.

I ain't tried the dual coils as they are silica but the OH did and she can't tell the difference between single coil and dual.

I think they made these dual coils to stop people building the heads

[Di]

Vape "N" Quit have a tutorial here for the mega tank coil 

 

vapenquit.co.uk/products/ask-us-a-queston/tricks-and-tips/ 

[iLardyboy]

May 29, 2014 19:32:32 GMT Di said:

Vape "N" Quit have a tutorial here for the mega tank coil 

 

vapenquit.co.uk/products/ask-us-a-queston/tricks-and-tips/ 

Thanks for the link Di, will have a look.

[iLardyboy]

Update - I managed to rebuild a new design head last night. I did it in the style of the Aspire Nautilus rebuild. I'm using the coil in an Aerotank Mini and have had two full tanks through. So far, no leaking, no gurgling or flooding. It's vaping like a champ, wicking is great and flavour is fantastic. The only issue with it is putting the stem back on, which won't go back on the way it was before. I screwed the base in as far as it would go and it does make a seal, so it doesn't affect the vape at all.

[smiledog]

Kangernew dual coil 1 take bottom pin out remove insaltor pull coil through bottom. 2 take a2mm drill bit flat side insert it in the bottom give it a tap chimney will come off.

[smiledog]

Kangernew dual coil 1 take bottom pin out remove insaltor pull coil through bottom. 2 take a2mm drill bit flat side insert it in the bottom give it a tap chimney will come off.

[vinny41]

May 29, 2014 19:59:01 GMT iLardyboy said:

May 29, 2014 19:32:32 GMT Di said:

Vape "N" Quit have a tutorial here for the mega tank coil 

 

vapenquit.co.uk/products/ask-us-a-queston/tricks-and-tips/ 

Thanks for the link Di, will have a look.

found that video misleading they showed the new kanger coils and then did the rebuild on the older type of kanger coils

This video shows a rebuild using the lastest kanger coil with the seal