I'm at my wit's end and really need some help

[lairey]

Jun 6, 2014 7:50:02 GMT Phoenix . said:

Jun 6, 2014 7:47:37 GMT lairey said:

Phoenix . do you have a phone that uses a mini usb charger? If so, give that a go. I use my kindle/tablet/phone chargers for my MVP and iTastes with no problem

Nice one lairey, I have a kindle and phone chargers, never thought of that, but then I am OLD

If they charge your kindle/phone fine, then they should charge your MVPs fine too.  If they don't, then we know the MVPs must be at fault  We will get you to a happy vaping place again! 

[hijack]

Nice one lairey this should be the end of your problems Phoenix .

[lairey]

Jun 6, 2014 7:52:21 GMT hijack said:

Nice one lairey this should be the end of your problems Phoenix .

[Phoenix .]

I can't tell you how relieved I am to have got it sorted, I really thought I was loosing it and on my way to Alzheimers

Thanks everyone.

[sammy13]

Jun 6, 2014 7:07:58 GMT Phoenix . said:

Jun 6, 2014 7:01:37 GMT hijack said:

Ok Phoenix . but do you plug the lead into the bottom of the MVP or screw it into the top where the tank usually fits on?

I plug it into the bottom of the MVP hijack as per instructions or plug it into my laptop/PC.

Fingers crossed for you that it is the wall plugs at fault.
Could I just double check with you though, the white MVP cable can be a bit confusing.
One end of the lead just has a single standard size USB on it, this bit plugs into either the PC or a wall plug adapter.

The other end with the square white box has 3 fittings attached to it, just one of the small ones plugs into the MVP.
There are various slots on the MVP though, and only one is the right one, perhaps someone could pop a PIC on with an arrow to the correct slot for you, I can't do that.

[DiscoDes]

Jun 6, 2014 10:28:09 GMT sammy13 said:

Jun 6, 2014 7:07:58 GMT Phoenix . said:

I plug it into the bottom of the MVP hijack as per instructions or plug it into my laptop/PC.

Fingers crossed for you that it is the wall plugs at fault.
Could I just double check with you though, the white MVP cable can be a bit confusing.
One end of the lead just has a single standard size USB on it, this bit plugs into either the PC or a wall plug adapter.

The other end with the square white box has 3 fittings attached to it, just one of the small ones plugs into the MVP.
There are various slots on the MVP though, and only one is the right one, perhaps someone could pop a PIC on with an arrow to the correct slot for you, I can't do that.

Charging lead goes in here:

[lairey]

Jun 6, 2014 8:01:48 GMT Phoenix . said:

I can't tell you how relieved I am to have got it sorted, I really thought I was loosing it and on my way to Alzheimers

Thanks everyone.

Has the phone charger solved it then?

[Phoenix .]

Jun 6, 2014 11:16:01 GMT lairey said:

Jun 6, 2014 8:01:48 GMT Phoenix . said:

I can't tell you how relieved I am to have got it sorted, I really thought I was loosing it and on my way to Alzheimers

Thanks everyone.

Has the phone charger solved it then?

Yes thank you, it has charged my Itaztevv perfectly, so I shall use it more now, I have also ordered some new wall chargers so I hope never ton be in that situation again. You were so on the ball.

[lairey]

Jun 6, 2014 15:41:15 GMT Phoenix . said:

Jun 6, 2014 11:16:01 GMT lairey said:

Has the phone charger solved it then?

Yes thank you, it has charged my Itaztevv perfectly, so I shall use it more now, I have also ordered some new wall chargers so I hope never ton be in that situation again. You were so on the ball.

 fantastic news, glad you're sorted

[Phoenix .]

Jun 6, 2014 10:28:09 GMT sammy13 said:

Jun 6, 2014 7:07:58 GMT Phoenix . said:

I plug it into the bottom of the MVP hijack as per instructions or plug it into my laptop/PC.

Fingers crossed for you that it is the wall plugs at fault.
Could I just double check with you though, the white MVP cable can be a bit confusing.
One end of the lead just has a single standard size USB on it, this bit plugs into either the PC or a wall plug adapter.

The other end with the square white box has 3 fittings attached to it, just one of the small ones plugs into the MVP.
There are various slots on the MVP though, and only one is the right one, perhaps someone could pop a PIC on with an arrow to the correct slot for you, I can't do that.

It's ok sammy, got it sorted now, yes I know where each of the components go.