aerotank mini issue

[upnorth]

So I got the mini today. Filled it up with liquid wow nice flavour and vapour production. Then liquid in my mouth. Took the atty off liquid in the ego thread. Cleaned it out, couple more puffs liquid again in my mouth. Atty off, liquid in ego thread. I'm vaping a 70/30 vg/pg mix. So I take it the heads don't like vg heavy liquids. I've taken it to bits and it's having a soak. I'll give it a go with a lighter vg mix see what happens. I hope it's just a vg issue because I really like the kanger tanks.

[Mrsmac]

Try closing the air flow slightly as vg liquids are denser than pg ones sui may need additional vacuum to wick?

[DiscoDes]

Check the coil head is screwed into the base properly.

[upnorth]

Jun 11, 2014 19:37:34 GMT Mrsmac said:

Try closing the air flow slightly as vg liquids are denser than pg ones sui may need additional vacuum to wick?

I have it only just open. So I can rule that one out thanks MrsMac

[Super-Shiny]

Screw the heads in nice and hand tight, make sure the airflow is not too low as this will suck in juice due to pressure, i prefer around the centre mark and above.

[Mrsmac]

Ok perhaps the airflow is to tight and it's wicking too well

Edit super shiney beat me to it!

[upnorth]

Jun 11, 2014 19:38:50 GMT DiscoDes said:

Check the coil head is screwed into the base properly.

Learnt the hard way with that issue. Protank 2 Protank mini and Protank mini II. So those bases are covered. I'm still thinking vg. I'll try a different juice in a bit.

[Super-Shiny]

Oh and i forgot, don't fill them up too much to the top as again juice/air pressure will kick in like most tanks out there, too much pressure and the juice will try and find a way out....same as plumbing/water.

[upnorth]

So new head. Tank 3/4 full 60/40 pg/vg. Airflow 50%. Vaping 4v 1.5ohm head. Thread full of juice atty very warm. boo hoo !!!!!

[Super-Shiny]

Jun 11, 2014 20:17:30 GMT upnorth said:

So new head. Tank 3/4 full 60/40 pg/vg. Airflow 50%. Vaping 4v 1.5ohm head. Thread full of juice atty very warm. boo hoo !!!!!

What heads are you using? i know there is meant to be some issues with the original heads, i.e they brought out the new heads: myepack.co.uk/accessories/upgraded-kanger-dual-coil-head.html

[Super-Shiny]

If you do/can make your own heads than this is what i do and never have any problems: allaboute-cigarettes.proboards.com/thread/40413/kanger-heads-guide

[upnorth]

I'm using the ones that came with the tank. They have two holes either side. I've bought 10 of the ones you have a link for aswell. But they look exactly the same.

[upnorth]

Jun 11, 2014 20:21:21 GMT Super-Shiny said:

If you do/can make your own heads than this is what i do and never have any problems: allaboute-cigarettes.proboards.com/thread/40413/kanger-heads-guide

I'll give it a go. See what happens. Thanks.

[Super-Shiny]

Jun 11, 2014 20:22:42 GMT upnorth said:

I'm using the ones that came with the tank. They have two holes either side. I've bought 10 of the ones you have a link for aswell. But they look exactly the same.

The old ones have two holes, the new ones have one slit

[upnorth]

I got the tank and heads from myepack. So ash is still selling the old heads. I thought he would have got some of the new ones in by now.