Evod glass with mini airflow control v2

[jackcustard]

Been using this setup with a spinner and been getting leaks and gurgles. Figured out the problem...

Looking through the evod viewing hole you can see the rubber cap on the coil when in the mini airflow control v2 doesn't sit flush to the chimney like it would if it was in the normal evod glass coil housing.

Don't know why they advertised and said it would work with it

Compared the mini airflow ring to the normal evod glass ring and the airflow has different threading and seating for the coil on the inside but hard to describe. It is the same/more similar to the mini pt2 which in the last 5 hours has worked fine although I can't see if it sits flush to the chimney or not..,

A warning and also a question, anyone else noticed this and is there a fix?

[jackcustard]

Anyone?

[DiscoDes]

Mini Airflow

Never seen one, got a link?

[jackcustard]

myepack.co.uk/accessories/kanger-mini-airflow-control-valve-v2.html

[jackcustard]

Works terrific on mini protank 2. Still no leak or gurgles from that.

[DiscoDes]

Says it should work with the PT glass, as it doesn't I'd contact the Vendor.

[lairey]

If there's a gap at the top of the rubber grommet, try adding a second one but upside down, on top of the first, that helps with the single coils in dual coil tanks


Sent from my iPhone using Tapatalk

[jackcustard]

It does work with the mini pt2 des just gurgles and leaks with evod glass because rubber cap on the head doesn't fit snug to the chimney... Will contact myepack.

Lairey, think that is the problem. Will give it a go just don't want to waste any juice... From Yorkshire I.

Gonna get a mini pt3. Hopefully it's a problem with only the evod glass and not all those with dual coils...

[jackcustard]

Just ordered a mini pt3, still working great with the pt2

[jackcustard]

Still no response from ash at myepack. Although still great shipping times and prices what's his username on here will pm him