smithyjules
Full Member
Joined:February 2014
Posts: 116
Location:
Likes: 63
Recent Posts
Last Online Mar 24, 2018 19:38:22 GMT
|
Post by smithyjules on Jul 6, 2014 17:50:11 GMT
The gurgling and popping I can cope with but tasting neat gingerbread juice yuck!
I've got aspire mini vivi novas and always give the drip tip and all connections a good wipe when I refil and often after/before each vape but I still get the spitting of juice during vaping.
I do try to vape slowly and I know the condensation is inevitable but this is definitely neat juice.
Any tips pretty please?!
|
|
chykensa
Super Member
a.k.a. AndyB
Custard fan :)
Joined:October 2012
Posts: 7,539
Location:
Likes: 6,404
Recent Posts
Last Online Sept 8, 2019 8:44:58 GMT
|
Post by chykensa on Jul 6, 2014 17:53:17 GMT
smithyjules - out of interest, have you recently put a new atomiser head in? This very often happens with a new head, and will quickly settle down. If you have a VV or VW battery or device, try temporarily lowering the volts or watts until the head has bedded in and then you can up to power a bit at a time. You may also have a bit of juice in the central tube - take off the atomiser, hold upright on a piece of tissue or kitchen towel and gently blow to expel any juice. Hope this helps!!
|
|
smithyjules
Full Member
Joined:February 2014
Posts: 116
Location:
Likes: 63
Recent Posts
Last Online Mar 24, 2018 19:38:22 GMT
|
Post by smithyjules on Jul 6, 2014 18:14:55 GMT
smithyjules - out of interest, have you recently put a new atomiser head in? This very often happens with a new head, and will quickly settle down. If you have a VV or VW battery or device, try temporarily lowering the volts or watts until the head has bedded in and then you can up to power a bit at a time. You may also have a bit of juice in the central tube - take off the atomiser, hold upright on a piece of tissue or kitchen towel and gently blow to expel any juice. Hope this helps!! Thanks chykensa. It doesn't seem to make any difference wether the coil is new or bedded in sadly. I can't say the voltage makes much difference either. I'll try the central tube tip though!
|
|
csmith10
Senior Member
Joined:April 2014
Posts: 410
Location:
Likes: 121
Recent Posts
Last Online Nov 17, 2023 22:29:42 GMT
|
Post by csmith10 on Jul 6, 2014 20:21:58 GMT
Throw it in the bin
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 22, 2024 17:37:22 GMT
|
Post by Deleted on Jul 6, 2014 20:41:03 GMT
I've been a convert to the GS - H2 clearo ... it's spits and argues but always a clean vape and no leaks , no more mod attys for me , if it works well without problem it makes an easy life
|
|
smithyjules
Full Member
Joined:February 2014
Posts: 116
Location:
Likes: 63
Recent Posts
Last Online Mar 24, 2018 19:38:22 GMT
|
Post by smithyjules on Jul 6, 2014 20:52:10 GMT
Buy me 2 new ones to use and I will Mr Smith!
I'll have a look at the other suggestion thank you
|
|
GunJack
Super Member
Zombies...Keep Calm and Aim for the Head
Joined:January 2013
Posts: 4,532
Location:
Likes: 3,323
Recent Posts
Last Online Feb 10, 2015 11:57:53 GMT
|
Post by GunJack on Jul 7, 2014 11:29:35 GMT
if they are top-coil, then this will happen often, and the coil is doing what it's supposed to. it doesn't happen so much on bottom-coils, asthe mouthpiece is further away from the actual coil
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 22, 2024 17:37:22 GMT
|
Post by Deleted on Jul 7, 2014 13:13:44 GMT
This may be worth a try - For the sake of 10 seconds tis worth it smithyjules
|
|
ronaldo
MOVED ON
Joined:February 2014
Posts: 7,956
Location:
Likes: 6,048
Recent Posts
Last Online Oct 15, 2014 9:31:34 GMT
|
Post by ronaldo on Jul 7, 2014 15:19:19 GMT
The gurgling and popping I can cope with but tasting neat gingerbread juice yuck! I've got aspire mini vivi novas and always give the drip tip and all connections a good wipe when I refil and often after/before each vape but I still get the spitting of juice during vaping. I do try to vape slowly and I know the condensation is inevitable but this is definitely neat juice. Any tips pretty please?! I love my vivi-novas and I think I can comment on this one Yahoo right there is two different coil heads for vivis do you know what the original head looked like as some have what looks like a upside down metal funnel on the top of them and some have what looks like a metal washer on the top of them
you need the correct head or at least the correct top they do move over
if the funnel type wont allow vivi to screw to screw together its the wrong head as funnel type is taller if the washer type leaks fluid into the drip tip its the wrong head as washer type is smaller so it sounds to me like you need the funnel type heads and you have the washer type the head will be fine but you need to change the head top hold the silicone washer and pull and move it over onto the other head very easy if you kept the old heads and if you didn't why not
|
|
ronaldo
MOVED ON
Joined:February 2014
Posts: 7,956
Location:
Likes: 6,048
Recent Posts
Last Online Oct 15, 2014 9:31:34 GMT
|
Post by ronaldo on Jul 7, 2014 15:22:12 GMT
and don't throw vivis out or there old heads as I think they are great and make me sad when people throw them away
|
|
smithyjules
Full Member
Joined:February 2014
Posts: 116
Location:
Likes: 63
Recent Posts
Last Online Mar 24, 2018 19:38:22 GMT
|
Post by smithyjules on Jul 7, 2014 16:59:41 GMT
The gurgling and popping I can cope with but tasting neat gingerbread juice yuck! I've got aspire mini vivi novas and always give the drip tip and all connections a good wipe when I refil and often after/before each vape but I still get the spitting of juice during vaping. I do try to vape slowly and I know the condensation is inevitable but this is definitely neat juice. Any tips pretty please?! I love my vivi-novas and I think I can comment on this one Yahoo right there is two different coil heads for vivis do you know what the original head looked like as some have what looks like a upside down metal funnel on the top of them and some have what looks like a metal washer on the top of them
you need the correct head or at least the correct top they do move over
if the funnel type wont allow vivi to screw to screw together its the wrong head as funnel type is taller if the washer type leaks fluid into the drip tip its the wrong head as washer type is smaller so it sounds to me like you need the funnel type heads and you have the washer type the head will be fine but you need to change the head top hold the silicone washer and pull and move it over onto the other head very easy if you kept the old heads and if you didn't why not
Hmmm any chance you could send me a photo or 2? Or a link to what the coil should look like? All confused lol. The coils I have are sealed with a rubber circle inside with a hole in the middle that you can see the actual coil through.
|
|
smithyjules
Full Member
Joined:February 2014
Posts: 116
Location:
Likes: 63
Recent Posts
Last Online Mar 24, 2018 19:38:22 GMT
|
Post by smithyjules on Jul 7, 2014 17:26:06 GMT
and don't throw vivis out or there old heads as I think they are great and make me sad when people throw them away Just had a quick look at one of the heads after a god awful blast of gingerbread to the back of the throat! The hole in the silicone circle is much larger (well by a few mm) than the other. I'm definitely going to change clearos as today's blast to the throat has put me right off theses I'm afraid. Have a fair few dual coils of different types too. Do you fancy doing some swapsies for some juice or concentrate Ronaldo?
|
|
|
Post by dreamylittledream on Jul 7, 2014 23:42:04 GMT
The Aspire heads are still my first choice when it comes to duel coils.
I was never a fan of Vivi's - try a Davide BDC - same heads but I'd never had them spit at me...can't say the same of many other clearos...
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 22, 2024 17:37:22 GMT
|
Post by Deleted on Jul 8, 2014 5:01:41 GMT
Yeah we'll stick in our wee little davide corner dreamylittledream and watch the catastrophe's from a far
|
|
smithyjules
Full Member
Joined:February 2014
Posts: 116
Location:
Likes: 63
Recent Posts
Last Online Mar 24, 2018 19:38:22 GMT
|
Post by smithyjules on Jul 8, 2014 5:58:21 GMT
Just ordered a kanger mini protank 3 as hubby can recoil those heads now and also an airflow control. Will see how I get on!
|
|