Box MOD for SX350

[mascaras]

Hi



i just ordered a sx350 yihiecigar chip (arrive next week) and im searching for a BOX Mod pre-ready to install the chip since i dont have the tools to make one !



best regards

[Steve (VapeStorm)]

Fasttech have empty hana modz style box. There was a thread posted earloer today aboit it

[xrayspecs]

You could always get one 3D printed

[mascaras]

hi steve !

yes i saw the box but i think may have few problems with the window and the fire button position ( require modifications) , from another forum about Cana box and sx350:

""From what I can tell with my SX350 chip pressed in to place (yeah it fits in the space where the chna30 chip was glued in, but tightly) is that the window is already too tall. you could easily remedy this by using a piece of plexi and putting a tint film on so that it could fill in the gaps around, or use some sort of bezel. The second area i see an issue is that the chip is a little longer than the chna30, and the clearance on the chip fitting in is tight, so you may run in to issues with the switches. you will definitley have to remove most of the glue from clopor. you could always grind some center section away, but id bet it would be too much trouble and affect where the screen rested. "

best regards

[mascaras]

Jul 10, 2014 20:57:06 GMT xrayspecs said:

You could always get one 3D printed

Hi Xray

thats the ones from shapeways right?

unfortunately they are a litle to high (price) for my budget, the  complete box on shapeways price is around 50€ shipped  (without 510 , buttons and battery holder)  , HOWEVER im considering that in last case ! (i just spent 60€ on chip ) 

EDIT: here´s the sx350 size specs >>> docs.google.com/file/d/0B61oDGxskBGhRkJIa05jbXlDdVE/edit


best regards 

[Deleted]

If you don't have the tools to make one why did you order the chip?

[mascaras]

Hi

solved ! Bought this pre-ready Box from a german modder (andy kennich) complete box without the chip (thanks to Andy )


s29.postimg.cc/awmv2mcgn/andyv2_2.jpg



thanks all for the help ! (thanks xrayspecs) 

best regards