MarkS
Super Member
Lord of Bargainous
Joined:February 2013
Posts: 2,103
Location:
Likes: 1,537
Recent Posts
Last Online Oct 7, 2023 13:30:08 GMT
|
Post by MarkS on Jul 15, 2014 8:44:28 GMT
I find desert flavours seem to shine in the rose, the ceramic base really seems to bring out the flavours. Mine is set up with a single 3mm micro coil using .3 kanthal wrapped to 1.2ohms, for wick I'm using two lengths of rico fashion summer cotton lace Coil center is set about 1mm lower than the channels in the side of the ceramic so that the wick has to angle down very slightly which causes the juice to pool within the coil on this build. No other tank attie I've tried handles my cocomel better than this rose. Sounds like the same set up as me. .3 kanthal always between 1.2 - 1.4 ohms although I use cotton wool as I'm not a fan of Rico cotton either. Used dessert, fruits , aniseed and tobacco type juices and personally cannot tell the difference in experience. My fragile ceramic cup broke for no apparent reason and because I wasn't overly impressed with the rose didn't see the point in forking out £15 for a new one. Still use it without the cup and again cannot personally notice any significant difference with or without it. Just goes to show it's more horses for courses than type of juice or not setting it up properly imo.
|
|
blakey
Super Member
Ninja Maestro
Joined:June 2011
Posts: 9,206
Location:
Likes: 4,242
Recent Posts
Last Online Nov 22, 2024 19:52:52 GMT
|
Post by blakey on Jul 15, 2014 8:58:57 GMT
I find desert flavours seem to shine in the rose, the ceramic base really seems to bring out the flavours. Mine is set up with a single 3mm micro coil using .3 kanthal wrapped to 1.2ohms, for wick I'm using two lengths of rico fashion summer cotton lace Coil center is set about 1mm lower than the channels in the side of the ceramic so that the wick has to angle down very slightly which causes the juice to pool within the coil on this build. No other tank attie I've tried handles my cocomel better than this rose. Sounds like the same set up as me. .3 kanthal always between 1.2 - 1.4 ohms although I use cotton wool as I'm not a fan of Rico cotton either. Used dessert, fruits , aniseed and tobacco type juices and personally cannot tell the difference in experience. My fragile ceramic cup broke for no apparent reason and because I wasn't overly impressed with the rose didn't see the point in forking out £15 for a new one. Still use it without the cup and again cannot personally notice any significant difference with or without it. Just goes to show it's more horses for courses than type of juice or not setting it up properly imo. Sounds like a squape reloaded would be more up your street. I have never had an issue with the ceramic on my rose, it's not got so much as a crack in it and it's used every day. If you're going to vapefest then you'll pick up the ceramics for about a fiver. Cotton wool for me tends to strip flavour from my cocomel, infact it works best with silica wick but this cotton lace is just so convenient when it comes to changing out the wick and sits nicely in between cotton wool and silica for flavour. Every attie handles different juice in different ways though and personal taste plays a large part also This rose is as good as it gets for cocomel, vanilla fudge on the other hand was good in it but not as good as it is in the squape. The squape seems to be more versatile in its ability to handle different flavours.
|
|
MarkS
Super Member
Lord of Bargainous
Joined:February 2013
Posts: 2,103
Location:
Likes: 1,537
Recent Posts
Last Online Oct 7, 2023 13:30:08 GMT
|
Post by MarkS on Jul 15, 2014 14:53:34 GMT
I have 2 Squapes (not reloaded) original and clone and although they are good (better than the Rose imo) I still prefer the Kayfun & Taifun. The ceramic cup breaking of it's own accord isn't an issue only experienced by myself. In fact this issue was why they originally had to sell spare cups because it happened to quite a few of the original purchasers. Just for the record I've had my Rose from the first list, so it's not like I've been playing around with it for 5 minutes. I find cotton wool gives more flavour than the the Rico cotton, in fact I get an funny taste when using Rico cotton that's not there with cotton wool. Also find silica has a weird taste now too after using cotton wool. In fairness I wasn't that big a fan of the Kayfun either as I found the vape from it very dry until I started using micro coils and cotton wool. Loving the Heron clone at the minute as well, another I'd rate above the Rose. What I am getting at is just because someone says this, that or the other is better does not make it so. Just because it is better for them does not mean it's better for everyone else. I've tried and tried to like the rose considering the money I paid for it and I wouldn't say it's a bad atty in the slightest but I would say I can buy just as good if not better for a lot less for my preferences. Cocomel on order for a comparison test. Edit to add: I do not disagree that different atties will make a juice taste different. There are loads of aspects that can effect juice flavour. Even something simple like changing a drip tip can increase or decrease flavour.
|
|
Dunny
Full Member
Joined:January 2014
Posts: 214
Location:
Likes: 69
Recent Posts
Last Online Apr 2, 2016 5:48:41 GMT
|
Post by Dunny on Jul 15, 2014 17:38:14 GMT
Been in touch with alibaba and 10 pieces inc delivery work out at £16.80 each delivered to my door....I'm happy to make the purchase if their is any interest? Does £25 including recorded delivery(£4.30) & packaging etc seem fair? I'm happy to front the money and take payment when the atties are in my hands. Alternatively if someone else wants to do it I'm happy to go on a list.....I'm easy I'd be up for one arron
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 27, 2024 5:37:49 GMT
|
Post by Deleted on Jul 15, 2014 18:09:00 GMT
Different atties handle different juices in different ways though. What specific type of juice should I use in my Rose for best performance? If you set a rose up correctly it blows a kayfun out of the water. How do I set up my Rose correctly? I use 100% vg so it can handle anything when it comes to wicking. Check out the link for the best way to set it up.
|
|
MarkS
Super Member
Lord of Bargainous
Joined:February 2013
Posts: 2,103
Location:
Likes: 1,537
Recent Posts
Last Online Oct 7, 2023 13:30:08 GMT
|
Post by MarkS on Jul 15, 2014 18:20:47 GMT
Tried that, still prefer the Kayfun. What else am I doing wrong or could it just be not everybody has the same preferences?
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 27, 2024 5:37:49 GMT
|
Post by Deleted on Jul 15, 2014 18:25:37 GMT
Have tried changing the height of the coil. The further away from the air hole the harsher the throat hit.
|
|
arron
Super Member
Approved Group Buyer
Joined:August 2013
Posts: 2,208
Location:
Likes: 2,269
Recent Posts
Last Online Oct 16, 2024 9:00:33 GMT
|
Post by arron on Jul 15, 2014 19:52:56 GMT
Guys, just to update you...I have requested permission to start a group buy thread for the rose clone. Once I have permission I will start a separate thread But as a tease.......the money has been paid
|
|
blakey
Super Member
Ninja Maestro
Joined:June 2011
Posts: 9,206
Location:
Likes: 4,242
Recent Posts
Last Online Nov 22, 2024 19:52:52 GMT
|
Post by blakey on Jul 15, 2014 20:00:31 GMT
Guys, just to update you...I have requested permission to start a group buy thread for the rose clone. Once I have permission I will start a separate thread But as a tease.......the money has been paid As soon as you want paying - drop me a PM
|
|
arron
Super Member
Approved Group Buyer
Joined:August 2013
Posts: 2,208
Location:
Likes: 2,269
Recent Posts
Last Online Oct 16, 2024 9:00:33 GMT
|
Post by arron on Jul 15, 2014 20:18:48 GMT
Guys, just to update you...I have requested permission to start a group buy thread for the rose clone. Once I have permission I will start a separate thread But as a tease.......the money has been paid As soon as you want paying - drop me a PM Will do mate, your place is safe as is everyone else's that has shown interest
|
|
geordie_vaper
Super Member
dont believe the hype!
Joined:November 2013
Posts: 5,969
Location:
Likes: 3,156
Recent Posts
Last Online Sept 18, 2014 7:51:08 GMT
|
Post by geordie_vaper on Jul 15, 2014 20:20:13 GMT
ahhh bugger put me down arron cheers
|
|
Dunny
Full Member
Joined:January 2014
Posts: 214
Location:
Likes: 69
Recent Posts
Last Online Apr 2, 2016 5:48:41 GMT
|
Post by Dunny on Jul 15, 2014 20:28:26 GMT
Guys, just to update you...I have requested permission to start a group buy thread for the rose clone. Once I have permission I will start a separate thread But as a tease.......the money has been paid let me know when you need paid
|
|
geordie_vaper
Super Member
dont believe the hype!
Joined:November 2013
Posts: 5,969
Location:
Likes: 3,156
Recent Posts
Last Online Sept 18, 2014 7:51:08 GMT
|
Post by geordie_vaper on Jul 15, 2014 21:58:26 GMT
sorry got to take my name off the list, just dropped 270 on a new tattoo, sorry again
|
|
VapingBad
Mod Maker
Mr Fix-it
Joined:January 2014
Posts: 13,800
Location:
Likes: 14,176
Recent Posts
Last Online Oct 6, 2024 16:13:51 GMT
|
Post by VapingBad on Jul 15, 2014 22:06:14 GMT
sorry got to take my name off the list, just dropped 270 on a new tattoo, sorry again I think you need to put that on the group buy thread m8
|
|
geordie_vaper
Super Member
dont believe the hype!
Joined:November 2013
Posts: 5,969
Location:
Likes: 3,156
Recent Posts
Last Online Sept 18, 2014 7:51:08 GMT
|
Post by geordie_vaper on Jul 15, 2014 22:11:21 GMT
cheers vb
|
|