Aga T2 centre post fun.

[davetherayon]

Only having an Aga T2 as a genny-style atomiser can be a challenge sometimes. Those tiny wee knurled nuts. When tightened they take the wire for a dosey-do and short out on the coil. The little insulators that break. But when it works it's a beaut.

So the latest thing was, the centre post just would. not. sit still, couldn't mount the T2 on anything, the centre post would float upwards and byebye connection. Irritating as heck. Until... "Hello my name is Heath Robinson and here's a fix for your problem".

The fix, simplicity itself, was to clip a thin bit of bog standard insulation tape off a roll, and wind it on the post at the base. So limiting it's ability to float. It still will move upwards, but the tape barrier ensures a connection is made. Got it working on the FT Hana right now.

I had forgotten the juice in it was one I didn't particularly like, that's gotta go!

[johnstone]

Hi I had a lot of trouble with mine wicking and hot spots I fixed the wicking by drilling the holes out to 3 mm and used a small washer to fix the hot spots . I broke the glass of mine and its no good to me anymore . its free to a good home if you want it?

[VapingBad]

Jul 18, 2014 0:56:36 GMT johnstone said:

Hi I had a lot of trouble with mine wicking and hot spots I fixed the wicking by drilling the holes out to 3 mm and used a small washer to fix the hot spots . I broke the glass of mine and its no good to me anymore . its free to a good home if you want it?

The spare glass used to be about a fiver, you could use a section of a syringe tube or any plastic tube if you don't use tank cranking juices.
Measurements:
Inner dia:    16.2 mm
Outer dia:    20 mm
Height:    22.9 mm

[Deleted]

Jul 18, 2014 0:56:36 GMT johnstone said:

Hi I had a lot of trouble with mine wicking and hot spots I fixed the wicking by drilling the holes out to 3 mm and used a small washer to fix the hot spots . I broke the glass of mine and its no good to me anymore . its free to a good home if you want it?

If dave doesnt want it i will give it a loving home.

You dont get if you dont ask my mum always told me.

[johnstone]

Jul 18, 2014 1:07:50 GMT VapingBad said:

Jul 18, 2014 0:56:36 GMT johnstone said:

Hi I had a lot of trouble with mine wicking and hot spots I fixed the wicking by drilling the holes out to 3 mm and used a small washer to fix the hot spots . I broke the glass of mine and its no good to me anymore . its free to a good home if you want it?

The spare glass used to be about a fiver, you could use a section of a syringe tube or any plastic tube if you don't use tank cranking juices.
Measurements:
Inner dia:    16.2 mm
Outer dia:    20 mm
Height:    22.9 mm

Thanks for the heads up but I have moved on from genies. Always leak in my pocket so can't take them out and if I'm in the house I like to use drippers nowadays

[johnstone]

Jul 18, 2014 1:22:40 GMT @tubthumper said:

Jul 18, 2014 0:56:36 GMT johnstone said:

Hi I had a lot of trouble with mine wicking and hot spots I fixed the wicking by drilling the holes out to 3 mm and used a small washer to fix the hot spots . I broke the glass of mine and its no good to me anymore . its free to a good home if you want it?

If dave doesnt want it i will give it a loving home.

You dont get if you dont ask my mum always told me.

If Dave don't want itno problem its yours i just went it to go a good home its been neglected and hasn't seen the light of day in over 6 months

[davetherayon]

All yours @tubthumper There's a Kraken on the way from SometimeinthenextmillenniumTech, so I'll be replete of Genesises (or is that Genesi?)

[johnstone]

Pm me your address tubthumper and will get it sent

[Deleted]

Jul 18, 2014 10:54:01 GMT johnstone said:

Pm me your address tubthumper and will get it sent

PM sent

Thanks

[Dunny]

Jul 18, 2014 11:06:27 GMT @tubthumper said:

Jul 18, 2014 10:54:01 GMT johnstone said:

Pm me your address tubthumper and will get it sent

PM sent

Thanks

I may have a spare glass tank for the aga t2 @tubthumper that you can have I'll check my box of bits when I get home from work and get back to you

[Deleted]

edit

[Deleted]

Jul 23, 2014 18:31:35 GMT Dunny said:

Jul 18, 2014 11:06:27 GMT @tubthumper said:

PM sent

Thanks

I may have a spare glass tank for the aga t2 @tubthumper that you can have I'll check my box of bits when I get home from work and get back to you

That would be much appreciated.