IPV2's in stock £65.55 delivered with free VTC5

[Roscopecotrain]

Pbusardo review.

A PBusardo Review - The iPV V2:

Sent from me from some far away land.

[boyofford]

Aug 6, 2014 13:21:08 GMT Roscopecotrain said:

Pbusardo review.

A PBusardo Review - The iPV V2:

Sent from me from some far away land.

Good job I didn't watch his review before purchase, I would of never got one!!

Does sound like QC on his was worse than mine, no glue on mine, battery lid fits snug and battery spring was fine, if a little tight!

Not had self fire yet, but that's worrying, gona see if mine does that at low battery, hope not.

Not to bothered if watts output is little out, enough of a range that you can find a nice spot for juice, I'm vaping around 30-35 watts only blipping up to 50 for shits n giggles.

His rda was probably getting hot because of lack of airflow, mine doesn't but has massive holes, fine at 50 watts too.

My battery cover is a fraction to tall, but you can slide down slightly and tighten screw, still stands up and allows rda to sit flush.

Shame about seam over top though, found a little juice had got through when changed battery this morning, off to put something in there to make it safer.

Over all I'm happy, as well as it keeps working and doesn't fire on own!!

[Roscopecotrain]

Worth a little watch, only a few minutes long.

[boyofford]

Aug 6, 2014 18:13:23 GMT Roscopecotrain said:

Worth a little watch, only a few minutes long.

That's pretty mad!

I figured that 1.4ohms ish would allow for 50watts with bigger coil meaning more contact with juice.

Did a 1ohm dual coil setup and works great but was gona try bigger ohms.

Still amazed with results from 1.8ohms at only 20watts!!

will have to try that.

Lot of people coming from sub ohms having to rethink there coils.

[spaniel]

Just got mine and at the moment it has a protank 3,  1.8 ohm on it and i can't see the telly 
This mod works well, none of the issues seen in the Busardo vid and i am well happy.
For a change 

[boyofford]

Aug 6, 2014 18:36:30 GMT spaniel said:

Just got mine and at the moment it has a protank 3,  1.8 ohm on it and i can't see the telly 
This mod works well, none of the issues seen in the Busardo vid and i am well happy.
For a change 

what watts you firing that at? I've only used rda on it so far, does it have enough air not to get too hot?

[spaniel]

boyofford was at 20 watts, on protank 3 with air control base, tried it higher but like you say it got to hot.

[richo71]

Just think we are over complicating things with coils etc for this device & generally, P Bursado had a shocker of a device and if anyone received this it would have been sent back to the vendor and replaced instantly, i have one and i will review it shortly, i am of the same opinion as P Bursado on the feel & quality of the device, but more to follow in my review, my first impressions is although it is ok it is another device that has been over hyped slightly but just stick a mini Nautilus on it with a 1.8 ohm bvc in and it performs admirably, keep your drippers for the mech's and evolv dna chips

[richo71]

Aug 6, 2014 18:36:30 GMT spaniel said:

Just got mine and at the moment it has a protank 3,  1.8 ohm on it and i can't see the telly 
This mod works well, none of the issues seen in the Busardo vid and i am well happy.
For a change 

My sentiments entirely, could not agree more

[boyofford]

Aug 6, 2014 20:03:42 GMT richo71 said:

Just think we are over complicating things with coils etc for this device & generally, P Bursado had a shocker of a device and if anyone received this it would have been sent back to the vendor and replaced instantly, i have one and i will review it shortly, i am of the same opinion as P Bursado on the feel & quality of the device, but more to follow in my review, my first impressions is although it is ok it is another device that has been over hyped slightly but just stick a mini Nautilus on it with a 1.8 ohm bvc in and it performs admirably, keep your drippers for the mech's and evolv dna chips

Will have to watch your review.
I can understand that some sub-ohms mech users will feel it lacking, those that are chasing higher watts perhaps but for regular rda users I think it's great, suits me being able to turn up and down the watts as I prefer at given time.

Evolv chips may be better, but they can have issues too. For the price it's great I reckon, dunno how long it will last, If it lasts me six months I'll be happy.

Suppose it all depends on people's expectations, I was looking at dna clones before buying this and think this will be better, well hope so!

[richo71]

Aug 6, 2014 21:54:42 GMT boyofford said:

Aug 6, 2014 20:03:42 GMT richo71 said:

Just think we are over complicating things with coils etc for this device & generally, P Bursado had a shocker of a device and if anyone received this it would have been sent back to the vendor and replaced instantly, i have one and i will review it shortly, i am of the same opinion as P Bursado on the feel & quality of the device, but more to follow in my review, my first impressions is although it is ok it is another device that has been over hyped slightly but just stick a mini Nautilus on it with a 1.8 ohm bvc in and it performs admirably, keep your drippers for the mech's and evolv dna chips

Will have to watch your review.
I can understand that some sub-ohms mech users will feel it lacking, those that are chasing higher watts perhaps but for regular rda users I think it's great, suits me being able to turn up and down the watts as I prefer at given time.

Evolv chips may be better, but they can have issues too. For the price it's great I reckon, dunno how long it will last, If it lasts me six months I'll be happy.

Suppose it all depends on people's expectations, I was looking at dna clones before buying this and think this will be better, well hope so!

Yeah, i agree with you   my expectations was quite high but upon holding it, as i said in my vlog it does feel like a toy in the hand and although it is made of aluminium it feels like a strong plastic in the hand

[boyofford]

Every time I notice the stupid stars on the side I shake my head in dismay....who thought that would look good?! Lol.

Does feel bit like it's made out of plastic, but doesn't bother me.

Not very ergonomic for walking down the road, but fine for work n home where you just pick up for use. Mods or mvp better for that.

[VapingBad]

Sigelei 100 W available about $150 delivered in import charges.

Probably the same sx330 board, so not as good as the 350 or DNA.

[boyofford]

Aug 6, 2014 22:55:02 GMT VapingBad said:

Sigelei 100 W available about $150 delivered in import charges.

Probably the same sx330 board, so not as good as the 350 or DNA.

Seen people like looks, I don't get it, looks like a old fashioned portable radio!

[VapingBad]

Aug 6, 2014 23:07:50 GMT boyofford said:

Aug 6, 2014 22:55:02 GMT VapingBad said:

Sigelei 100 W available about $150 delivered in import charges.

Probably the same sx330 board, so not as good as the 350 or DNA.

Seen people like looks, I don't get it, looks like a old fashioned portable radio!

Billetbox looks, twice the power, probably too much power from an 18650 without the type of monitoring and control you get from a DNA, shame they are not using the sx350 as it seems a lot better board IMO.