Focal group buy- HANA DNA30 £27.00 Finished again!!

[Q]

and as for the best tank.... it HAS to be the Rose for me, it is now my permanent fixture

[leo]

Sept 29, 2014 21:32:25 GMT VapingBad said:

Sept 29, 2014 17:00:02 GMT leo said:

A vtc5 lasts me 6-8 hours in the Sig. About the same as in a mech, but after that time the mech will be down to 3.6v, the Sig draws the battery down to 3.16v, so is using a lot more capacity over the same time.
I don't know if I'm explaining myself well, just feels like the Sig sucks up more juice!!

If I were you I would change the battery way before that as it will last longer and it must be going very low when it's firing. A DNA30 set to 25 W rejects VTC4s at around 3.45 V as they are sagging too much.

Don't worry... I am... but the first time it shut down at low batt, I put the battery on the multimeter just to see where it was... I was surprised it went that low. So I won't let it get that far again.

[jmw2309]

Mine is still not here :: and I have a stock of vtc5's all raring to go too!

EDIT: It's here! And it's scratched. But I don't care. It works great. I wish I had been more patient and not bought the ipv2 now....never mind. Many watts make man happy!

[brads42]

Well mine lasted a day. Vaped like a champ yesterday, 1.8 ohm coil @ 12 watts, picked it up first thing this morning - dead. Does fire feebly but screen blank. Recharged battery, still nowt. Waiting for new batteries, see if my old efest imr was the problem but not looking good

[Q]

Red one arrived today, working great

[goneforagasper]

My Black one (group buy) just arrived and vaping like a gud un

Has anyone sussed out which wrap will fit ?

[callumcutter1]

Oct 1, 2014 13:08:19 GMT goneforagasper said:

My Black one (group buy) just arrived and vaping like a gud un

Has anyone sussed out which wrap will fit ?

Yep, from what 'research' I've done I found that any authentic will fit. These clones have EXACTLY the same dimensions as the authentic, down to the exact millimetre. Saying that, I was also told by a company that the clouper clone of the hana is ALSO exact in the dimensions, but I'm not too sure about that myself, never checked. If it is, then both the authentic wraps and clouper/cana wraps will fit this perfectly

[Q]

I enquired at Demon Wraps and they replied that they dont do one for that model

[goneforagasper]

Thanks callumcutter1 have you decided where you will get yours from yet

[callumcutter1]

Oct 1, 2014 13:23:23 GMT goneforagasper said:

Thanks callumcutter1 have you decided where you will get yours from yet

I'm just going to wait until my device gets here, so I can see how I like it once its in my hand. If I STILL want a wrap after that, I'll end up getting one from J-wraps, as they come to about £10 including postage with a discount code (I think the latest is 10off, but I'm not too sure). All other wraps I've seen are also around £10, even on eBay, so you'll be getting the best wraps on the market, for the same price

But like I said, I may get the device and not even want a wrap on it, so I'm just gonna wait 

[jeffc]

Oct 1, 2014 12:55:05 GMT brads42 said:

Well mine lasted a day. Vaped like a champ yesterday, 1.8 ohm coil @ 12 watts, picked it up first thing this morning - dead. Does fire feebly but screen blank. Recharged battery, still nowt. Waiting for new batteries, see if my old efest imr was the problem but not looking good

That reads exactly like the fault on mine. Worked great for around 5 hours, then needed battery changed. New fully charged fitted = dead as a dodo, nothing, zilch.

You will need to notify "Doris", asap.


2 units now failed from Focalecig GB

[brads42]

Looks like China's on holiday again, typical.

[jmw2309]

+3 for buggered. Worked fine last night and this morning nothing. Does make atty bubble very slightly but does not vape. I have tried a few other attys and all the same. :mad:

[VapingBad]

Oct 2, 2014 8:08:26 GMT jmw2309 said:

+3 for buggered. Worked fine last night and this morning nothing. Does make atty bubble very slightly but does not vape. I have tried a few other attys and all the same. :mad:

Could be the earth screw, try taking it out and cleaning the screw and scraping off the anodising around the screw hole.  If it uses a counter-sunk screw try and replace it with a dome head one or use a washer above the connector.  Also if you have some Noalox or Vaseline put a little in the screw hole before reassembling.

[jmw2309]

Thanks VapingBad will try these suggestions. At least I got 2 days out of it I suppose :rolleyes: