Feeler for DNA 30 box mod.

[JayJ]

Just want to put a feeler out to see if anything is likely to be heading for the classies anytime soon. I'm thinking of something unique, by unique I mean a modders build along the lines of what piper1 or Super-Shiny produce. Super-Shiny like I've said before I appreciate and respect you don't sell yours anymore it's just for people to gauge the type of thing I'm looking for, the reason I tagged you is you might direct me somewhere or know something I don't, not difficult I know. Piper1 well you never know you might be mid build lol. Something with a sprung 510 is preferred like the fat daddy so everything sits flush, if this isn't possible an adjustable 510. Preferably in a stainless finish (actually most likely aluminium thanks mybad ) but other finishes considered. Perhaps adonized, probably outside my budget if it's adonized but it's worth a try. Oh and small is good.

I will add I don't want anybody holding onto something for me, that's not what I'm asking. The members on here are so helpful it's something I imagine most would be prepared to do. It's I know these things are not the cheapest of mods and with a purchase like this I'll be vaping well outside my usual budget so thats why it's a feeler at the moment. If I know something is coming up I might be able to swing it. I just like the idea of something built with a bit of pride that isn't off the production line.


Cheers, Jay

Edit: Maybe somebody has something other to suggest than a DNA mod. Suggestions very welcome.

[mybad]

You will be very very luck to get a box mod made from stainless steel unless the box is pre bought for the job.

[JayJ]

Sept 1, 2014 18:45:11 GMT mybad said:

You will be very very luck to get a box mod made from stainless steel unless the box is pre bought for the job.

Ok I appreciate that input. Anybody who maybe has something on offer sometime soon, I've taken that on board.

mybad the shiny pretty things I've seen on here just resembled stainless, I'm assuming they're some other alloy ?

[mybad]

Yup aluminium, easy to work with .

[JayJ]

Thank you mybad I'll edit the OP accordingly.

[JayJ]

Bump. I'm still looking around, also considering the hana clone from focal but trying to leave that until the last minute.

[Super-Shiny]

I am in the near future making a mod, will be smaller than all my other mods and with a little surprise on the front of it (not leaking my idea)......that does not help does it

[lairey]

Sept 5, 2014 18:52:30 GMT Super-Shiny said:

I am in the near future making a mod, will be smaller than all my other mods and with a little surprise on the front of it (not leaking my idea)......that does not help does it

It does if you're planning to sell any Jason! 

[callumcutter1]

With how cheap it is, what about this? I'm really thinking about it aswell allaboute-cigarettes.proboards.com/thread/44403/focal-group-hana-dna30-appr?page=8&scrollTo=780990

[Ripshod]

Sept 5, 2014 19:05:39 GMT callumcutter1 said:

With how cheap it is, what about this? I'm really thinking about it aswell allaboute-cigarettes.proboards.com/thread/44403/focal-group-hana-dna30-appr?page=8&scrollTo=780990

I concur. And I'll confirm it fires a 0.5ohm coil at 30watts no problem.

[callumcutter1]

Sept 5, 2014 19:13:46 GMT Ripshod said:

Sept 5, 2014 19:05:39 GMT callumcutter1 said:

With how cheap it is, what about this? I'm really thinking about it aswell allaboute-cigarettes.proboards.com/thread/44403/focal-group-hana-dna30-appr?page=8&scrollTo=780990

I concur. And I'll confirm it fires a 0.5ohm coil at 30watts no problem.

Personally, I think I'm gonna wait until the new sigelei 100w and ipv3 etc. to come out before I look at box mods, just for the two 18650's instead of one

[Steve (VapeStorm)]

Pmd Jay

[JayJ]

Super-Shiny I feel you posting that little teaser in this thread should privelage me with details. I also feel that as it's my wanted thread, well it's an offer isn't it ...... just pulling your leg mate.

Jay

[Mev]

I'm in the middle of designing/building an alu anodised and plated box mod. Depends how well it goes if i'll be making to order later on.

[JayJ]

Sept 5, 2014 21:00:02 GMT Mev said:

I'm in the middle of designing/building an alu anodised and plated box mod. Depends how well it goes if i'll be making to order later on.

Sounds interesting, I'll keep an eye out