Chain Vapers :)

[Ripshod]

Sept 3, 2014 22:10:41 GMT aliscampbell said:

happyloman vv/vw

Bless you!!

[decoy]

lol i miss all the fun
the i taste 3 settings are just 2 different ways of changing how much power you are sending to the atty
i 2 struggled with the idear at 1st changing the wattage is slightly smaller jumps in power to the voltage and yes the voltage do change when you turn up the watts it just dont show it on the vv3,think of it more like 2 memories so you set it to your favored wattage on one atty and your favored volts for a diff atty

rebuild able attys are awesome and frustrating but well worth the effort in the end and this is when the mods come in as your itaste vv3 dont have the power to let one shine
i would suggest purchasing a cheap vamo v5 poss as low as £12 a i2 charger for about £13 and 2 18350 batts for around a tenner and a dirpper ether tboh, helios or stilair clone each about £10(the reason for using a dripper 1st is they the easiest atty to coil and as such a good place to start)

rebuilable tank attys i can can only recommend 2 as they are the 2 i use a kayfun light clone(leaks a bit after a refill and refilling it aint the easiest thing)i do like the vape i get from kayfuns and have a mini as well(boy is that a fiddly sod to build)
or this new rose clone which seems to me to be easyer to build and use than the kayfuns(no tools need to refill and no leeks)

then at some point youll possibly get a better mod and bigger batts so you can start making more vapor/flavor(you aint gona rock a disco with a portable radio lol)
hope that kinda helps

[happyloman]

Sept 4, 2014 8:03:47 GMT decoy said:

 voltage do change when you turn up the watts it just dont show it on the vv3,think of it more like 2 memories so you set it to your favored wattage on one atty and your favored volts for a diff atty

I didnt understand the other 2 posts

But yes it doesnt change on the LCD, which kind of renders it useless to me. From the minute you purchase it you have to decide which you will use volts or watts, as from then on the other will not be giving a correct reading.
If the watts changes but isnt shown on the LCD then, when you change from adjusting the voltage to adjusting the watts, each time you increase the watts by 1 it wont be the value shown thats increased by 1, but the value its been set to when the voltage was changed?

[VapingBad]

Haven't read all the thread but re OP, I was chain vaping about 13 ml a day 6 mg, I went up to 10 mg and stopped over night went to 8.3 ml a day which is creeping up to nearly 10 ml a day after a few months, but am using bigger wicks and higher power.

[dragon]

Sept 4, 2014 11:33:27 GMT happyloman said:

Sept 4, 2014 8:03:47 GMT decoy said:

 voltage do change when you turn up the watts it just dont show it on the vv3,think of it more like 2 memories so you set it to your favored wattage on one atty and your favored volts for a diff atty

I didnt understand the other 2 posts

But yes it doesnt change on the LCD, which kind of renders it useless to me. From the minute you purchase it you have to decide which you will use volts or watts, as from then on the other will not be giving a correct reading.
If the watts changes but isnt shown on the LCD then, when you change from adjusting the voltage to adjusting the watts, each time you increase the watts by 1 it wont be the value shown thats increased by 1, but the value its been set to when the voltage was changed?

Whatever setting you change, the power to your atty IS changing.

What ISN'T changing, is what the display shows you. If you are looking at the voltage, then you are in VV mode. If you are looking at Watts you are in VW mode. Your device DOESN'T tell you what voltage it has calculated in regards to your selected wattage it just does it. As soon as you go looking at volts it is changing to VV mode and showing you whatever you have selected for when it is in that mode.

Any adjustment you make in VV mode does not affect VW mode, and visa versa. They are two separate operating modes.

[Deleted]

Easy way to vape a lot

Have a slow leaking clearo (tank not on well enough)

Did that yesterday

PS. Just go for broke happyloman and get a VTR ....I love mine and I have a special deal with vape escape that if mine lasts more than 6 months then dies VE Jason is going to send me a new one

My name by the way means destroyer of Mods. My specialities are vamos and MVPs and also lavatubes

[happyloman]

Got my Nautilus today just starting to vape a Strawberry Custard

RE- The vv/vw thingy, the problem Im having with this is that when I vape on the vv and then change the mode to wattage theres no difference in the taste/vape ie- it doesnt feel like its changed anything
Its 6 months old now so maybe its knackered, as the first one I bought packed in last month.
Will maybe take the plunge on a VTR etc in a few months, thanks all

[sej016]

Just because you change operating mode from VV to VW does not mean a thing - until you adjust one or the other from its current setting.

Exactly what did you expect to happen?

[fred]

I'm still not sure you've grasped it.

Have you got 2 atties with different resistance coils? 1 ohm and 2 ohm would be good.

Right, set your device to vv, and say 4v.
Now put the 2 ohm atty on and have a vape. Good, eh?
Now put the 1 ohm atty on - woah, warmer, more vapour and flavour?

OK, now set your device to vw, and say 10w.
Put on the 2 ohm atty and have a vape.
Now put on the 1 ohm atty on and have a vape.
You notice that the last 2 produce a very similar vape?

I don't bother with vv and just use vw - no calculations needed, as the device does all the ohms law work for you.

If you like,e to vape custard at 10 watts, it will be the same using a 1, 1.5 or 2 ohm Atty.
If you use VG, you'll have to adjust the voltage for each resistance Atty to get the same experience.

ETA: the 2 modes are COMPLETELY independent of each other. No setting or reading will transfer from one mode to the other.

[happyloman]

Sept 4, 2014 22:01:21 GMT fred said:

ETA: the 2 modes are COMPLETELY independent of each other. No setting or reading will transfer from one mode to the other.

Thats the bit that I never knew, but I dont feel much change when I do change from one, to the other settings. I will sit down and tinkering over the weekend though, cheers

[Bofh]

I was confused at first with my MVP 2.

Now i just leave it on VW and adjust depending on what resistance coil i'm using.

Lower res coil i turn it down as i find it tends to overheat the liquid.

When i learnt to coil i did go slightly mad and ended up with a ridiculous amount of coils of varying diameter, wraps and from different AWG.

i don't just re-wick i re-coil. Why ?

Because i can