Which fogger rba version is the best & where can I get one?

[Dan]

Sept 8, 2014 10:00:58 GMT hijack said:

Sept 8, 2014 9:52:06 GMT boyofford said:

That just confused me more lol, the middle one looks wider...but that's a 4.0?!

I know, the foggers are confusing and it doesn't help that they get referred to as the oldest 4.0 being 4.0 the older 4.0 as 4.1 and the 4.1ultimate as the 4.2.

Very confusing.

Or maybe it just confused the hell out of me and I got it all back to front ???

From what I understand, they are up to 4.3 at present.. 4.2 has small deck, 4.3 has largr deck.

[boyofford]

Sept 8, 2014 10:01:43 GMT arron said:

I own the 4.1, it has a smaller deck but larger capacity and and airer draw...ver airy, IMO it handles higher power better compared to the kayfun when above 17 watts.
The build is a pita to first set up but it's not a deal breaker

The clone is no cheaper than the original, I got an original for around £30 I think ....but since I'm mainly using my rose (x3 lol) its took a back seat.

Could be up for a trade if you are still interested in getting one??

Interesting, so the smaller deck one has airer draw? well suppose should be looking at that then. they are so confusing lol.

[Cousin Itt]

Sept 8, 2014 10:01:58 GMT Dan said:

Sept 8, 2014 9:57:57 GMT Cousin Itt said:

I`m thinking of drilling mine out too Dan. Not much to loose . Probably have to bin the air flow ring as that blocks 1/2 the holes already and then it will look cack .

I'm going to "modify" the airflow ring by removing the smaller flange so it becomes functional.

Just don't know if I have the steady hand to modify the juice channels!

Ill try the air flow first then maybe faff with the juice channels after if I`m still not happy so I can see what did what to the performance . Ive got a big miller and rotary table so altering the juice channels won`t take 10 mins. If nothing works I`ll shoot it with my airgun

[arron]

Showing the differences between the v4.4 and v4.3, air holes down to 1.5mm(x2) a direct lung inhale is achievable when afc is fully open.
Not as airy compared to say a zenith or omega rda but still good flow for an rba

[Dan]

Sept 8, 2014 10:51:20 GMT Cousin Itt said:

Sept 8, 2014 10:01:58 GMT Dan said:

I'm going to "modify" the airflow ring by removing the smaller flange so it becomes functional.

Just don't know if I have the steady hand to modify the juice channels!

Ill try the air flow first then maybe faff with the juice channels after if I`m still not happy so I can see what did what to the performance . Ive got a big miller and rotary table so altering the juice channels won`t take 10 mins. If nothing works I`ll shoot it with my airgun

It will definitely improve with more airflow but I think the juice channels will need work to take full advantage.. all I have is a cheap dremel so I will wait on you doing it properly before I even try! Going to be a bit of a bodge with my limited tools selection regardless

[Dan]

Sept 8, 2014 10:51:16 GMT arron said:

Showing the differences between the v4.4 and v4.3, air holes down to 1.5mm(x2) a direct lung inhale is achievable when afc is fully open.
Not as airy compared to say a zenith or omega rda but still good flow for an rba

Which is which?

Mine says 4.0 on it but doesn't have the copper screw.. confused.com!

[ronaldo]

I personally don't think you can beat the fogger V2 I have 2 of them and they are great

[Ripshod]

Sept 8, 2014 10:03:16 GMT arron said:

I believe the latest version (mine) which is the 4.4 is actually marked the 4.1 just to confuse matters....will go check now

You're right arron, I remember the thread like it's on the inside of my eyelids. Mine is defo the 4.3 but has 4.0 on the tank 

Currently got mine dual coiled @ 0.5 ohms (30 watts calculated)and it lives up to it's name. Flavour wise it's up there with the Rose. I love it even more cos it's the one I learned to coil on, kinda threw myself in at the deep end.

Once you get them right they're banging tanks, and easy to repeat a good build on.

[hijack]

An amusing read even those that have them have to go check so they know what version to describe it as, it sure aint what it says on the tin.
Vendors don't know what to call it, myepack is selling it as the 4.1 ultimate which according to the above pics everyone is calling it the 4.4.

So the one with the big deck is the 4.3 which has 4.0 stamped on it and the one with the small deck that has 4.1 on it is the 4.4?

[Ripshod]

Sept 8, 2014 15:41:00 GMT hijack said:

An amusing read even those that have them have to go check so they know what version to describe it as, it sure aint what it says on the tin.
Vendors don't know what to call it, myepack is selling it as the 4.1 ultimate which according to the above pics everyone is calling it the 4.4.

So the one with the big deck is the 4.3 which has 4.0 stamped on it and the one with the small deck that has 4.1 on it is the 4.4?

Just sooooo true m8. On the box 4.3, on the tank 4.0. So damned confusing, but at least a few of us have our heads around it 

No wonder I don't see any clones, what the heck would they call them 

[Cousin Itt]

Sept 8, 2014 13:45:49 GMT Dan said:

Sept 8, 2014 10:51:20 GMT Cousin Itt said:

Ill try the air flow first then maybe faff with the juice channels after if I`m still not happy so I can see what did what to the performance . Ive got a big miller and rotary table so altering the juice channels won`t take 10 mins. If nothing works I`ll shoot it with my airgun

It will definitely improve with more airflow but I think the juice channels will need work to take full advantage.. all I have is a cheap dremel so I will wait on you doing it properly before I even try! Going to be a bit of a bodge with my limited tools selection regardless

What you reckon Dan

Air holes were approx 1.5mm



Now 2mm



Put a little groove / dimple on the side of the deck so with a wiggle I can get a syringe into the tank



Juice slots were 2mm so Ive opened them to 3mm and made them slightly deeper



And last thing . I machined off about 1/3rd of the air flow ring and I`m nearly getting full clearance on the 2mm air holes



Just need to give it a good wash and chuck some coils in to see if its better or fked   Might do that tomorrow .

[boyofford]

Sept 8, 2014 15:41:00 GMT hijack said:

An amusing read even those that have them have to go check so they know what version to describe it as, it sure aint what it says on the tin.
Vendors don't know what to call it, myepack is selling it as the 4.1 ultimate which according to the above pics everyone is calling it the 4.4.

So the one with the big deck is the 4.3 which has 4.0 stamped on it and the one with the small deck that has 4.1 on it is the 4.4?

Glad to hear it wern't me just being simple!

[Dan]

Sept 8, 2014 17:19:50 GMT Cousin Itt said:

Sept 8, 2014 13:45:49 GMT Dan said:

It will definitely improve with more airflow but I think the juice channels will need work to take full advantage.. all I have is a cheap dremel so I will wait on you doing it properly before I even try! Going to be a bit of a bodge with my limited tools selection regardless

What you reckon Dan

Air holes were approx 1.5mm



Now 2mm



Put a little groove / dimple on the side of the deck so with a wiggle I can get a syringe into the tank



Juice slots were 2mm so Ive opened them to 3mm and made them slightly deeper



And last thing . I machined off about 1/3rd of the air flow ring and I`m nearly getting full clearance on the 2mm air holes



Just need to give it a good wash and chuck some coils in to see if its better or fked   Might do that tomorrow .

I think that in the name of vaping nirvana, you should get it cleaned up and setup tonight!

Then you can quote me for the same work on mine

[Cousin Itt]

Been a long day today so I`ll give it a go tomorrow Dan . Hopefully I find the right amount of channel wick first go

Sat down chilling now with some awesome tangerine e liquid

[Cousin Itt]

Well Ive given it a try Dan .
Went with .5 ohm twisted coils and wicked it like picture below.
Thoughts . Much more vapor , much better airflow . I don`t know if the vapor improvement is mainly having the lower ohm coils or not ? seams a lot better than when I had a .7 ohm in it in standard set up. Finding .5 a bit on the hot side but I`ll give it a run and see if I get to like it . Flavour doesn`t seam stunning but I`m using a not so great juice at the mo as I didn`t want to waste any of my favorite ones in case it was crap . I vape this off and recoil it a bit higher and chuck some snake oil in it in a day or so .