Rose v2 clone

[Q]

My FT was pre-wicked so I used it 'as was', for my latest I've gone back to cotton

[hijack]

Sept 11, 2014 17:41:03 GMT arron said:

Sept 11, 2014 16:47:40 GMT -V- said:

I noticed that with a dual coil in the KayFun.
Better vapour production and a nicer cooler vape with a single coil...

I definitely prefer this in single coil setup  

Yes ill be finishing this tank and ill take one out and go back to a single. The heat is just crazy. My drippers don't get anywhere near that hot.

[arron]

Sept 11, 2014 17:45:19 GMT Q said:

Having been vaping this for the past hour I have to say that I cant believe the difference, my original build was an FT pre-wick at 1.5ohm, anything above 7 watts gave a burnt taste but the flavour at 7 watts was 100% better than my aerotank, then I dropped in this twisted .25 at 0.9ohm (1.1ohm after wicking and soaking) and the flavour was 100% better again, I then tried upping the wattage, I've reached 20watts and the flavour blows my head off, I didn't realise that vaping could be this good.

And it is a scientific test, I've used the same (homebrew) vanilla Boubon, from the same bottle, and this last build was EXACTLY the same juice because it was still in the tank from when the old coil died.

I'm even more pleased because this is only the 3rd coil I've ever built, happy isn't a big enough word

Pleased you found a great setup bernie, mine are all cleaned out and packed away ready for the drive to derby in the morning so I'm sat in work with a crappy nautilus 

[Q]

Are you finished in Plymouth then arron ?

[arron]

Sept 11, 2014 19:35:33 GMT Q said:

Are you finished in Plymouth then arron ?

No just on leave for a week, will be down here till around July next year then it will be time to hand in the I.D card and live a normal life 

[Q]

I think we need to organise a vape meet up this end of the countie(s)

[arron]

Sept 11, 2014 20:29:14 GMT Q said:

I think we need to organise a vape meet up this end of the countie(s)

I would def be up for that, will try and arrange something when I'm back off leave

[Q]

There's a good few of us down here, always up for a meet, we could even collect stock at the same time

[igual]

Well done Q looks like you finally got yourself a good build

Would defo be up for another meet up

[ringading]

Sept 11, 2014 20:29:14 GMT Q said:

I think we need to organise a vape meet up this end of the countie(s)

Sounds like a plan. 

[nurseygirl]

I cant get the bottom off mine, does anyone have any tips please ?

[buckowski]

Sept 13, 2014 1:50:51 GMT nurseygirl said:

I cant get the bottom off mine, does anyone have any tips please ?

I'm finding threads are really tight too, hopefully it will all ease up with use...rubber gloves for grip has so far worked well in gettin it all apart.
awesome atty this mind, I love me kayfun but this steps it up a notch, similar nice smooth vape but the flavour is far superior on the rose. Well happy with it, thanks for the gb Aaron.

[buckowski]

...

[hijack]

If you mean the bottom tank section, then if the airflow bit is still attached you can grip the tank section by hand, and use the big base to grip the bottom, and twist off from the tank section.



If the airflow piece has come off then its going to be a lot harder. You can try using some grips to grab that thin bit at the bottom and twist off the tank section by hand or with a second set of grips. If you end up using grips then you will want to cover the teeth so you don't damage the mod, Which I ended up doing after getting frustrated with it and gripping the pieces to hard with the grips.


The answer to not having to do this again is, Tighten up that airflow piece using the bar and stand like an SOB so it never wants to unscrew easily again. Then you will be able to crack the threads like in the pic above.

[nurseygirl]

Sept 13, 2014 6:25:35 GMT hijack said:

If you mean the bottom tank section, then if the airflow bit is still attached you can grip the tank section by hand, and use the big base to grip the bottom, and twist off from the tank section.



If the airflow piece has come off then its going to be a lot harder. You can try using some grips to grab that thin bit at the bottom and twist off the tank section by hand or with a second set of grips. If you end up using grips then you will want to cover the teeth so you don't damage the mod, Which I ended up doing after getting frustrated with it and gripping the pieces to hard with the grips.


The answer to not having to do this again is, Tighten up that airflow piece using the bar and stand like an SOB so it never wants to unscrew easily again. Then you will be able to crack the threads like in the pic above.

With a lot of effort and a rubber glove i managed to get it off. Thanks