RDA KIT FORM ?

[moviemad]

Iam tempted to add all the things i need to the slow boat, compared to price i could add a few more things .

[Tom]

The prices are brilliant from there.

I'd probably get everything I needed and get it done.

Just don't get carried away - lots and lots of cheap things can quickly become a lot more expensive than you first thought xD

[flavourtank]

welcome to the world of coiling

all the above sounds good, ive recently got the hang of it and its good

[bonnieboy]

Thanks think I'm at present going to be more into RBA tanks before moving on to drippers if that makes any sense but have taken on board info on where to get the wire, cotton, ohm meter etc and will try practicing with coils and rewicking before moving on to next stage

[Tom]

Oct 19, 2014 16:22:26 GMT bonnieboy said:

Thanks think I'm at present going to be more into RBA tanks before moving on to drippers if that makes any sense but have taken on board info on where to get the wire, cotton, ohm meter etc and will try practicing with coils and rewicking before moving on to next stage

RBA - www.fasttech.com/p/1904601
RDA - www.fasttech.com/p/1879500

pretty much the same deck!

just saying xD

[moviemad]

Oct 19, 2014 16:16:54 GMT Tom said:

The prices are brilliant from there.

I'd probably get everything I needed and get it done.

Just don't get carried away - lots and lots of cheap things can quickly become a lot more expensive than you first thought xD

Oh don't i know it lol Ordered a nitecore d4 last week off a post from here . Mrs seen the site she owns a Nail Bar and she couldn't get over the prices compared to what she has been paying needless to say she fired in about 20 items .. i won't even mention what the kids added lol ..

[Tom]

Oct 19, 2014 16:24:31 GMT moviemad said:

Oct 19, 2014 16:16:54 GMT Tom said:

The prices are brilliant from there.

I'd probably get everything I needed and get it done.

Just don't get carried away - lots and lots of cheap things can quickly become a lot more expensive than you first thought xD

Oh don't i know it lol Ordered a nitecore d4 last week off a post from here . Mrs seen the site she owns a Nail Bar and she couldn't get over the prices compared to what she has been paying needless to say she fired in about 20 items .. i won't even mention what the kids added lol ..

Haha, its a great way to get things cheaper, whether you would have bought them in the first place is another matter altogether xD

[flavourtank]

I actually sold my rba's rda's cos I couldn't get the hang of it

then I got a rose v2 clone and done it all now lol just got a magma clone these are really easy to work with

also work out the airflow to where the coil is (that's my opinion) but figure that out when you get it all,

and try get a tracking number with wingwong post

[bonnieboy]

Think I am looking for a higher resistance with RBA is that correct if so what wire and do you know if they have ready made coils?

[Greg]

Oct 19, 2014 16:54:44 GMT bonnieboy said:

Think I am looking for a higher resistance with RBA is that correct if so what wire and do you know if they have ready made coils?

You can use pretty much any wire you like but a good starting point is 0.25 or 0.3mm kanthal as they make quite a robust coil which will last a long time and you can rewick them easily many times without damaging them.

you can get ready made microcoils from China for pennies but they tend to be quite flimsy due to the wire used.

[Tom]

Oct 19, 2014 17:05:58 GMT Greg said:

Oct 19, 2014 16:54:44 GMT bonnieboy said:

Think I am looking for a higher resistance with RBA is that correct if so what wire and do you know if they have ready made coils?

You can use pretty much any wire you like but a good starting point is 0.25 or 0.3mm kanthal as they make quite a robust coil which will last a long time and you can rewick them easily many times without damaging them.

you can get ready made microcoils from China for pennies but they tend to be quite flimsy due to the wire used.

I have ordered these just to try em out
www.fasttech.com/p/1841103

[Greg]

Oct 19, 2014 17:37:48 GMT Tom said:

Oct 19, 2014 17:05:58 GMT Greg said:

You can use pretty much any wire you like but a good starting point is 0.25 or 0.3mm kanthal as they make quite a robust coil which will last a long time and you can rewick them easily many times without damaging them.

you can get ready made microcoils from China for pennies but they tend to be quite flimsy due to the wire used.

I have ordered these just to try em out
www.fasttech.com/p/1841103

Looks like they're 0.3mm so could be good, seems they've expanded their range 

[moviemad]

In my cart so far what else should i add total is $47 about £29 have another 20 to spend what else should i add.
Tobh Atty V2, SS, 1:1---
CloneBlack(2*AA), 510/eGo--
Orchid V3, 22mm, SS + PC----
1.5ohm, 0.3mm Dia., 30*30mm: 50-Pack X 2
Nautilus Mini, Coil Head, 1.8ohm, 5-Pack

[Tom]

precision screwdriver set
www.fasttech.com/products/0/10002699/1200203-6-pieces-metric-precision-screwdriver-set-with-cas

these are amazing if you're planning on doing your own coils one day, you can fire the coil whilst shaping it.
www.fasttech.com/p/1655800

[Marcus]

The most important thing is battery safety and knowing what you are doing and their limits. If you buy some cheap "trustfire" 18650 that you have no idea of the amp limit and dont test first it's just asking for trouble.

Decent charger, decent Batteries and a semi decent ohm meter.

BTW, what mod are you planning to use with the RDA?