Which Rebuildable Tank From Fastech

[Greg]

Nov 9, 2014 15:22:50 GMT Tom said:

Nov 9, 2014 15:19:32 GMT Greg said:

What about a Rose 

been tempted to have a go at this one.

www.fasttech.com/products/3028/10009626/1848800

I had one but didn't really give it a fair enough chance in hindsight and passed it on after 1 pretty poopey build xD

Can't comment on those Tom as I got my 3 from Arron GB.

a bit fiddly to set the coil but they last a month or two so it's no real issue. I find then a quality vape and a very easy atty to fill, from the top.
rico cotton is perfect for the Rose and perfect wise for the juice channels. Double it over and use a 3mm ID coil leaving four wick tails one for each channel without all that doubling back faff with CW 

[gph]

Nov 9, 2014 15:19:32 GMT Greg said:

Nov 9, 2014 15:08:18 GMT gph said:

I researched rebuildable tanks last week. I like airy draws so that eliminated near half of them. The rest were eliminated because they needed tools to fill the tanks which isn't a big issue but certainly an inconvenience. I ended up ordering Erlkönigin and Kraken clones. Here's my elimination list I made so I wouldn't forget which tanks I'd already decided against and why.

Eleaf Lemo - needs tools to fill and adjust airflow

Kayfun - not enough air flow

Taifun GT - not enough air flow even with air tube removed

Fogger v4 - needs tools to fill

Pontus - needs tools to fill

Orchid - needs tools to fill

What about a Rose 

I can't remember why I passed on that and the expromiser. Hence the list

[gph]

Nov 9, 2014 15:15:24 GMT Tom said:

Nov 9, 2014 15:08:18 GMT gph said:

I researched rebuildable tanks last week. I like airy draws so that eliminated near half of them. The rest were eliminated because they needed tools to fill the tanks which isn't a big issue but certainly an inconvenience. I ended up ordering Erlkönigin and Kraken clones. Here's my elimination list I made so I wouldn't forget which tanks I'd already decided against and why.

Eleaf Lemo - needs tools to fill and adjust airflow

Kayfun - not enough air flow

Taifun GT - not enough air flow even with air tube removed

Fogger v4 - needs tools to fill

Pontus - needs tools to fill

Orchid - needs tools to fill

nice.

let us know how you get on!

Will do but I might not be using them for a while. I've only used production coils to date. Presently a Beyond Vape Silo with Nautilus BVCs (great tank by the way). I also bought an Infinite Magma RDA to learn coils and wicks before I start filling whole tanks.

[keepitgoin]

A lot of suggestions thank you all. I am a bit worried (certain to be honest!!) that a TINY Screw that needs removing to refill a Tank may well (no doubt about it!) be lost/mislaid/eaten/fall down the sink within 24hours so I, personally, would consider a Device that needs the existence, in the correct hole of a screw I couldn't identify without a magnifying glass a Faff to far?

[lairey]

Nov 9, 2014 16:31:16 GMT keepitgoin said:

A lot of suggestions thank you all. I am a bit worried (certain to be honest!!) that a TINY Screw that needs removing to refill a Tank may well (no doubt about it!) be lost/mislaid/eaten/fall down the sink within 24hours so I, personally, would consider a Device that needs the existence, in the correct hole of a screw I couldn't identify without a magnifying glass a Faff to far?

I picked up 30 spare screws for the KFL fill hole off ebay for about £4.  The 1700500 SKU KFL clone on FT is the best KFL clone they do.  It's really very good if you do decide to go for one

[keepitgoin]

Thanks for that lairey. If they are selling 30 spare screws for lost KFL one's, then I think my earlier comments apply to many current KFL users and probably to other Tanks with small screws that need to be fully removed to fill!

[lairey]

Nov 10, 2014 18:29:22 GMT keepitgoin said:

Thanks for that lairey. If they are selling 30 spare screws for lost KFL one's, then I think my earlier comments apply to many current KFL users and probably to other Tanks with small screws that need to be fully removed to fill!

They're not being sold specifically for the KFs keepitgoin... I just use my KFs 90% of the time, and even though I haven't lost one yet, thought spares would be a good idea

[Tom]

Nov 10, 2014 18:29:22 GMT keepitgoin said:

Thanks for that lairey. If they are selling 30 spare screws for lost KFL one's, then I think my earlier comments apply to many current KFL users and probably to other Tanks with small screws that need to be fully removed to fill!

when you've done it every day (twice a day sometimes) for months then you can do it with your eyes closed. When you first start doing it i guess it feels different, now filling any other way seems daft to me

4 kayfuns

1 mini screwdriver in bag

0 fill screws lost

25 spares at home

[keepitgoin]

I suppose that makes sense, have backups ready so you know you'll never need 'em!!!

[Tom]

Nov 10, 2014 19:21:29 GMT keepitgoin said:

I suppose that makes sense, have backups ready so you know you'll never need 'em!!!

yup.

if you have spare of a thing you never break/lose it.

no spares - insta-break/lose xD

[pebbles]

Nov 9, 2014 16:34:56 GMT lairey said:

Nov 9, 2014 16:31:16 GMT keepitgoin said:

A lot of suggestions thank you all. I am a bit worried (certain to be honest!!) that a TINY Screw that needs removing to refill a Tank may well (no doubt about it!) be lost/mislaid/eaten/fall down the sink within 24hours so I, personally, would consider a Device that needs the existence, in the correct hole of a screw I couldn't identify without a magnifying glass a Faff to far?

I picked up 30 spare screws for the KFL fill hole off ebay for about £4.  The 1700500 SKU KFL clone on FT is the best KFL clone they do.  It's really very good if you do decide to go for one

Hi lairey, Do you have a link for the aforementioned screws,please.

[Tom]

Nov 10, 2014 19:33:14 GMT pebbles said:

Nov 9, 2014 16:34:56 GMT lairey said:

I picked up 30 spare screws for the KFL fill hole off ebay for about £4.  The 1700500 SKU KFL clone on FT is the best KFL clone they do.  It's really very good if you do decide to go for one

Hi lairey, Do you have a link for the aforementioned screws,please.

For anyone needing fill screws.
KFL are M2.5 Countersunk.
KFL+ are M2.5 Pan head.
I use 4mm in length.
www.ebay.co.uk/itm/111005608483?var=410158081779

Deck screws are M1.6 3mm (good upgrade on the clone screws)
www.ebay.co.uk/itm/221326204336?var=520199811750

Fill screw o rings
2mm ID 1mm wide
www.ebay.co.uk/itm/141454931534?_trksid=p2060778.m2749.l2649&var=440602638636&ssPageName=STRK%3AMEBIDX%3AIT

[keepitgoin]

WOW Tom, that is a serious amount of spares!!!

[Tom]

Nov 10, 2014 21:14:23 GMT keepitgoin said:

WOW Tom, that is a serious amount of spares!!!

When its your main tank of choice it pays to have a few bits lying around

[Greg]

Perfect tips for filling kayfuns straight from your bottle

www.amazon.co.uk/gp/product/B00J2N2FQI?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s00