CoilMaster under a fiver FT

[smifee]

jevans A link to the BMV Coiler www.e-cigarette-forum.com/forum/blogs/bill-s-magic-vapor/5819-bmv-coiler-2-o.html

It might seem a bit OTT but I recoil for 7 vapers. T3S, Kanger single & dual and Nautilus heads. I used to be able to cut 20 wires & make 20 coils but yesterday it took 11 wires to get 5 acceptable coils. I need to find a solution as the arthritis will only get worse.

I only have one size wire 28 awg, .32 Kanthal and only do 2 sizes of coil 2.5mm for Nautilus & 2.1mm for the others.

New to using the Magma. I cocked up the first one by doing a modification www.e-cigarette-forum.com/forum/rebuildable-atomizer-systems/594806-magma-rda-lifting-air-channels.html. I'll have to get my son to see if he can drill out the plugs in the air holes as I didn't tell him to angle the end of the plug. This meant it just blocked the air flow. I bought another and use it just for testing flavours. So far the condensation through the air holes isn't a great problem.

I'll send a PM re steam trains.

[jevans]

Jan 17, 2015 10:06:29 GMT smifee said:

This meant it just blocked the air flow

Try knocking a sewing needle into the bottom of the bottom air hole and then a small screwdriver.
As you can no doubt guess I did the very same thing!
Ok re PM.

Jim

[macmagoo]

Ships in 7 days means it is out of stock and you will be lucky to have it shipped in two weeks just like the Kuro Coiler Fasttech are advertising.