Get Off My Cloud
Super Member
Master of Hardware
Formerly dr00g
Joined:December 2014
Posts: 5,693
Location:
Likes: 7,691
Recent Posts
Last Online Jan 8, 2021 22:17:08 GMT
|
Post by Get Off My Cloud on Feb 13, 2015 1:02:29 GMT
Looks interesting compatible with Atlantis stock heads and has an RBA deck, also top filling which is nice. Airflow design i'm not sure of though.
Bit of a strange beast looks like the Subtank and takes Aspire heads. Apparently the RBA deck is the same size as the stock head too so i'm wodering if the RBA might be compatible with the Atlantis?
|
|
smifee
Super Member
Joined:February 2014
Posts: 901
Location:
Likes: 732
Recent Posts
Last Online Nov 28, 2024 18:18:45 GMT
|
Post by smifee on Feb 13, 2015 11:39:23 GMT
Never tried sub ohming but mikey likey:- rebuldable head so I can use a higher ohm coil and my own wicking material, top fill and supposed no leaky.
So I went to Lee Vapers at Gosport and bought one.
Full marks to Lee Vapers. I wasn't allowed to touch the tank until I'd had a safety chat. When satisfied I was clued up they took my money.
I'll update with my verdict after a couple of days use.
|
|
Get Off My Cloud
Super Member
Master of Hardware
Formerly dr00g
Joined:December 2014
Posts: 5,693
Location:
Likes: 7,691
Recent Posts
Last Online Jan 8, 2021 22:17:08 GMT
|
Post by Get Off My Cloud on Feb 13, 2015 12:28:34 GMT
Never tried sub ohming but mikey likey:- rebuldable head so I can use a higher ohm coil and my own wicking material, top fill and supposed no leaky. So I went to Lee Vapers at Gosport and bought one. Full marks to Lee Vapers. I wasn't allowed to touch the tank until I'd had a safety chat. When satisfied I was clued up they took my money. I'll update with my verdict after a couple of days use. Nice one, if the top filling works as faff free as they claim without leaks and it gets good airflow from that funky bottom design then i'll be sold.
|
|
smifee
Super Member
Joined:February 2014
Posts: 901
Location:
Likes: 732
Recent Posts
Last Online Nov 28, 2024 18:18:45 GMT
|
Post by smifee on Feb 13, 2015 13:30:32 GMT
To preserve my sub ohm virginity I'm using a 1ohm coil on the rebuidable deck with airflow at minimum. It's on a Mor Crann mech mod.
Used my usual wicking material, cotton tape, and it burnt. Yes I did prime the coil and take primer puffs. No I didn't let it stand. I was chain vaping and it was fine for 5 minutes but then the burn. The wick was dry near the coil.
Now using the supplied wicking. A pad of flecky cotton. Made the wick a bit longer and it's been fine for 30 mins.
Top fill is a doddle. No screw in a tiny hole. Just tip it in.
It won't screw onto my iSticks with the toilet seat adaptors. I won't bother to try without the adaptor.
It came with 3 .5ohm coils for the deck. Having only ever used .32 wire they look like they are made from fencing wire.
The supplied stock head reads .62ohms. I won't be using that because I don't like the filler they use.
|
|
Get Off My Cloud
Super Member
Master of Hardware
Formerly dr00g
Joined:December 2014
Posts: 5,693
Location:
Likes: 7,691
Recent Posts
Last Online Jan 8, 2021 22:17:08 GMT
|
Post by Get Off My Cloud on Feb 13, 2015 13:51:11 GMT
To preserve my sub ohm virginity I'm using a 1ohm coil on the rebuidable deck with airflow at minimum. It's on a Mor Crann mech mod. Used my usual wicking material, cotton tape, and it burnt. Yes I did prime the coil and take primer puffs. No I didn't let it stand. I was chain vaping and it was fine for 5 minutes but then the burn. The wick was dry near the coil. Now using the supplied wicking. A pad of flecky cotton. Made the wick a bit longer and it's been fine for 30 mins. Top fill is a doddle. No screw in a tiny hole. Just tip it in. It won't screw onto my iSticks with the toilet seat adaptors. I won't bother to try without the adaptor. It came with 3 .5ohm coils for the deck. Having only ever used .32 wire they look like they are made from fencing wire. The supplied stock head reads .62ohms. I won't be using that because I don't like the filler they use. Cool i think i may punt for one then, hows the airflow compare to say the Subtank Mini?
|
|
smifee
Super Member
Joined:February 2014
Posts: 901
Location:
Likes: 732
Recent Posts
Last Online Nov 28, 2024 18:18:45 GMT
|
Post by smifee on Feb 13, 2015 14:13:45 GMT
Get Off My Cloud I'm a Nautilus Mini addict. Until today they were the only tanks I've used for months. I did try a rebuildable tank, the Smok RSBT, but couldn't get the wicking right consistently. I only got the Sega because of the top fill. I haven't bought an Atlantis or Subtank because I like mouth to lung inhale and don't want mahoosive airflow. Go on get one. You know you want need it.
|
|
Get Off My Cloud
Super Member
Master of Hardware
Formerly dr00g
Joined:December 2014
Posts: 5,693
Location:
Likes: 7,691
Recent Posts
Last Online Jan 8, 2021 22:17:08 GMT
|
Post by Get Off My Cloud on Feb 13, 2015 15:06:22 GMT
Get Off My Cloud I'm a Nautilus Mini addict. Until today they were the only tanks I've used for months. I did try a rebuildable tank, the Smok RSBT, but couldn't get the wicking right consistently. I only got the Sega because of the top fill. I haven't bought an Atlantis or Subtank because I like mouth to lung inhale and don't want mahoosive airflow. Go on get one. You know you want need it. I like to lung hit so need lots of air, the top fill design is what drew me too but i was dubious it worked as well as the manufacturer claimed, apparently it does though. The other thing i was curious about was whether the RBA deck would work in an Atlantis, i don't have an Atlantis myself but if they sell the the RBA deck as a separate spare that could be something the Atlantis users might be interested in. My interest is peaked enough i've ordered one P.S. letsavit, it comes in BLUE!!!
|
|
smifee
Super Member
Joined:February 2014
Posts: 901
Location:
Likes: 732
Recent Posts
Last Online Nov 28, 2024 18:18:45 GMT
|
Post by smifee on Feb 14, 2015 17:20:54 GMT
Sega SagaSince getting this tank I've spent most of my waking hours trying to stop it burning wicks. I haven't learnt much new but have confirmed that I'm a dork! Not liking the filler in the Nautilus heads I started with the rebuildable deck. Put a 1ohm coil on it and burnt cotton tape & jap cotton wicks. Higher ohm coils didn't work either. Decided to give up my subohm virginity and used the stock coil. It burnt. Ripped the innards out of it and put a 1.6ohm coil in it. Wicked with jap cotton and you'll never guess - it burnt. I knew that juice wasn't getting to the wicks but why? Took the top of the tank off and whilst peering inside a light bulb came on in my head. The top threads on but I'd never got it tight. It just spun. Putting it back on I kept turning & turning and eventually it stopped. I hadn't realised that I needed to keep turning until the o ring compressed and made the seal. Recoiling the Atlantis heads is so easy. I've done loads of Nautilus heads where I have to put the head in a crocodile clip on a stand and am restricted in the length of the coil because of the small opening. Even with my sausage fingers & arthritis I can do an Atlantis coil with no 'helping hands'. VerdictPros:- Very easy top fill, holds more liquid than the Nautilus Mini, positive air flow adjustment, rebuildable deck, takes Atlantis heads, fits flush on Evic, Sid, Cartel, 4Nine & Mor Crann. Cons:- Won't thread onto my iStick bending adaptor, leaves a gap on Provari 2.5. When Lee Vapers get the full range of colours I'll be getting some more
|
|
scaffman69
Super Member
Joined:August 2012
Posts: 855
Location:
Likes: 195
Recent Posts
Last Online Jun 20, 2024 13:47:06 GMT
|
Post by scaffman69 on Feb 14, 2015 17:36:16 GMT
I`m a big fan of all the atties anyvape have produced so i can`t see this being any different, might have to invest me thinks.
|
|
Get Off My Cloud
Super Member
Master of Hardware
Formerly dr00g
Joined:December 2014
Posts: 5,693
Location:
Likes: 7,691
Recent Posts
Last Online Jan 8, 2021 22:17:08 GMT
|
Post by Get Off My Cloud on Feb 14, 2015 17:59:29 GMT
Was hoping mine would arrive today but no vapemail for me Surprised i haven't seen any hype over it for the features it has and it's competitively priced with the other sub ohm offerings like the Subtank. i'm looking forward to receiving it and seeing how it performs.
|
|
bigd
Senior Member
Always watching.
Joined:December 2014
Posts: 447
Location:
Likes: 228
Recent Posts
Last Online Apr 22, 2019 17:57:55 GMT
|
Post by bigd on Feb 14, 2015 19:03:59 GMT
These are looking very impressive and I'm after a couple of new atties. Has anyone links to a supplier?
|
|
DiscoDes
Super Member
Perp's Personal Aide
Joined:April 2011
Posts: 11,588
Location:
Likes: 6,099
Recent Posts
Last Online Oct 24, 2022 6:13:15 GMT
|
Post by DiscoDes on Feb 14, 2015 19:26:07 GMT
Get Off My Cloud smifeeAm I right assuming that as the heads are the same size/fitting as the Aspire Atlantis that I could get a Sega Tank rebuildable head only and use it in the Atlantis? smifee where did you get your from?
|
|
Get Off My Cloud
Super Member
Master of Hardware
Formerly dr00g
Joined:December 2014
Posts: 5,693
Location:
Likes: 7,691
Recent Posts
Last Online Jan 8, 2021 22:17:08 GMT
|
Post by Get Off My Cloud on Feb 14, 2015 19:34:17 GMT
Get Off My Cloud smifeeAm I right assuming that as the heads are the same size/fitting as the Aspire Atlantis that I could get a Sega Tank rebuildable head only and use it in the Atlantis? smifee where did you get your from? I can't confirm that mate as i don't have the Atlantis. All i know is the SegaTank takes Atlantis coils and the chimney doesn't need to be changed to use the RBA, that was why i was wondering if the RBA could be used in an Atlantis.
|
|
smifee
Super Member
Joined:February 2014
Posts: 901
Location:
Likes: 732
Recent Posts
Last Online Nov 28, 2024 18:18:45 GMT
|
Post by smifee on Feb 14, 2015 19:52:34 GMT
Get Off My Cloud smifeeAm I right assuming that as the heads are the same size/fitting as the Aspire Atlantis that I could get a Sega Tank rebuildable head only and use it in the Atlantis? smifee where did you get your from? Got mine from here leevapoursltd.co.uk/anyvape-segatank-sub-ohm-and-rda.htmlDon't have an Atlantis to confirm if the rebuildable deck fits but can't see why it wouldn't. Haven't seen them listed separately anywhere. The top fill was my reason for getting this and if it vapes as well as the Atlantis I reckon that makes it the better tank.
|
|
autumntwist32
Super Member
Joined:June 2014
Posts: 620
Location:
Likes: 434
Recent Posts
Last Online Feb 18, 2018 12:19:56 GMT
|
Post by autumntwist32 on Feb 14, 2015 20:02:06 GMT
It says at the bottom of the page on that link that the RBA base does not work in the Atlantis.
|
|