Yosen sx zero issue

[Roscopecotrain]

DiscoDes lairey @spikeyfridge i know you guys have one so you may have a fix.

The 510 connection, where the atty screws in to the 510 it is a round plate with two holes in it that also screws in and out. Everytime i unscrew the atty that little plate comes out with it and i have to screw it back onto the mod.

You have a fix for this or is just a case of putting up with it?

Edit

This bit.

[Deleted]

Mine did the same after I received a replacement 510 connection as the threads were goosed. Just try and tightening it further with an atty on did the trick for me.

[lairey]

Only happened to me once Roscopecotrain. I tightened it right down with a coin and it hasn't happened since

[Roscopecotrain]

Ah i dont have a coin slot just two small holes lairey

[Ripshod]

Would a sacrificial pair of scissors fit Roscopecotrain? Didn't you get a tool for this job when you bought it?

[Roscopecotrain]

May 28, 2015 8:33:01 GMT Ripshod said:

Would a sacrificial pair of scissors fit Roscopecotrain? Didn't you get a tool for this job when you bought it?

The two holes are tiny mate. Would not get scissors in them. Not that i could see in the box. Will have another check tomoz when i get home.

[Deleted]

I sold mine! And got a smowell

[geordie_vaper]

needle nose plyers or tweezers

[arron]

Stick a small screwdriver in one of the holes and use it to turn the plate, I only had to do mine up past finger tight to stop it coming off

[Roscopecotrain]

May 28, 2015 8:58:27 GMT arron said:

Stick a small screwdriver in one of the holes and use it to turn the plate, I only had to do mine up past finger tight to stop it coming off

I tried that arron and it still cane off with the atty. I will have to put more strength into it lol.

[arron]

May 28, 2015 9:21:47 GMT Roscopecotrain said:

May 28, 2015 8:58:27 GMT arron said:

Stick a small screwdriver in one of the holes and use it to turn the plate, I only had to do mine up past finger tight to stop it coming off

I tried that arron and it still cane off with the atty. I will have to put more strength into it lol.

Maybe get cc to do it....all that pink has turned you soft 

[Roscopecotrain]

May 28, 2015 9:24:46 GMT arron said:

May 28, 2015 9:21:47 GMT Roscopecotrain said:

I tried that arron and it still cane off with the atty. I will have to put more strength into it lol.

Maybe get cc to do it....all that pink has turned you soft 

Haha you joke but she has a lot more strength than i do lol.

[lairey]

May 28, 2015 8:19:30 GMT Roscopecotrain said:

Ah i dont have a coin slot just two small holes lairey

Is that not yours in the picture Ross?  You can use a penny to tighten that one.

[Roscopecotrain]

May 28, 2015 10:02:35 GMT lairey said:

May 28, 2015 8:19:30 GMT Roscopecotrain said:

Ah i dont have a coin slot just two small holes lairey

Is that not yours in the picture Ross?  You can use a penny to tighten that one.

No that is not mine hun, i dont have the cut out for the coin and my two holes are really small.

[Q]

I had a similar problem (but I DO have the slot) just tightened down REALLY hard with a wide blade screwdriver, I presume the idea is that you can use them in hybrid mode