What RTA to try next

[phatfil]

there are squapeReloaded clones on the chinese sites focal or 3fvape? for about £20 some bundled with 3 build heads, and some with 5 styles, so is a build yur own but is an easy atty to coil on wicking is an art and less is more and the air control goes from tight to airy,, leaking with the not quite right wick is a chance..

I have a UD Zephyrus which has a wide channel RBA head and also uses OCC heads, however my one build on the rba leaked, as did the OCC head when first installed dry (i didnt drip juice in to prime it).. with the OCC head left installed the leaking ceased after the initial pouring out (1ml of juice wasted) i put it down to a poor wick in the rba and not priming the wick when using the OCC head.. If you want to try it out pm me when it leaked it was sat on my 50w istick and the leak killed the mod i hold a grudge so want to sell it on..

[minime]

Nice of you to offer mate but if a atty leaks it will leak on me so I'm going to say thanks but no thanks on that one lol.

[sydsut]

Jul 4, 2015 11:28:27 GMT minime said:

Ok guys iv had kayfuns,subtanks,spheroid,orchids,delta 2 but tbh I don't like them they all seem to have a problem in one way or another.

what I'm looking for is a tank that does not leak gives grate flavour has pre built coils and a Rba what would you recommend me to try only I'm getting a bit errrrrr disillusioned with vaping at the moment. 

Perhaps it's not the tanks but the juices you're buying and mixing. All the tanks you've mentioned have their fans on here and all are capable of bloody good results with flavour and a leak free vape. Just buying another few atty's may not be the solution for you. Perhaps the truth is that vaping just doesn't give you the satisfaction that smoking did or you haven't found the right flavours yet. From this and other posts of yours I get the impression that you're very impatient and that can be a big problem when it comes to finding the vape that suits you. I've got all my Orchids (6 so far) so that they don't leak and all give very satisfying flavour and vaping experience. But it took time for me and I suspect others to get them to give of their best.

If I was you I would pick just one of your tanks and spend a day trying to get it to give of it's best with different wattages, heat settings, airflow settings with the juice that is your current best of. Hope this helps.

[minime]

Withe the orchid v6 I can get fantastic flavour but it will leak so I get it so it does not leak but then it loses it's flavour, you wouldn't believe the hours iv spent playing with wick and coils lol.

[hijack]

Like has been said the 'sub' has many who think its great.(dont have one myself)

If you really want to try something else, I have tried a couple of tanks very recently that have impressed me.
1. The Monster kayfun, I know another KF, but this is a slight improvement on the 2 KFL's I have (hcigar + ehpro) for flavor and airflow. My review
2. Just been trying the Goliath and it has the best flavor I have had from any tank so far. Review will be up by end of today. I use an ADV so can say 'The flavor is strong in this one'.

[bluemagnum]

Not the cheapest tank in the world, (never been cloned) but a favourite of mine

www.atmistique.gr/evivat.html?

Built right, never leaks, great flavour and if you can't be bothered to build it yourself, pre built coils can be bought. Top filler as well and can also be used as a dripper.

[kittyvape]

Great thread here about the Eviva link, plus I can vouch for that the Goliath's flavour is the best I've tasted so far. Really gets through juice fast, but easy to fill, and great to be able to work on the base and fill it, while not having to worry about there being juice in the tank. I modded my original a little; took the ring at the bottom off, as I like it on fully open airflow anyway, and put an extra o-ring around underneath the juice control ring, plus really tighten it up a lot after filling; no leaks. Great little tank. I have a clone Goliath too, and the juice control ring was just about immovable. Removing an o-ring, and sanding down, I've read as fixes. I removed an o-ring which helped a lot, put the parts in the ultrasonic to help with getting them apart, and have a Dremel on my purchase list to sand it down properly; had a go with some very rough sandpaper so far, and can see it'll work great to fully sand it. Already looser. The original Goliath is amazing. And sydsut's idea of going deeper into exploring the tanks you have already sounds a great idea too. 

[bluemagnum]

Jul 5, 2015 12:05:11 GMT kittyvape said:

Great thread here about the Eviva link, plus I can vouch for that the Goliath's flavour is the best I've tasted so far. Really gets through juice fast, but easy to fill, and great to be able to work on the base and fill it, while not having to worry about there being juice in the tank. I modded my original a little; took the ring at the bottom off, as I like it on fully open airflow anyway, and put an extra o-ring around underneath the juice control ring, plus really tighten it up a lot after filling; no leaks. Great little tank. I have a clone Goliath too, and the juice control ring was just about immovable. Removing an o-ring, and sanding down, I've read as fixes. I removed an o-ring which helped a lot, put the parts in the ultrasonic to help with getting them apart, and have a Dremel on my purchase list to sand it down properly; had a go with some very rough sandpaper so far, and can see it'll work great to fully sand it. Already looser. The original Goliath is amazing. And sydsut's idea of going deeper into exploring the tanks you have already sounds a great idea too. 

It was because of that thread and prof beards review, I bought one with the drip tube and some extras. It must have impressed me as I bought another. It's up there with the rose for flavour but a doddle to fill. Cotton lasts for weeks using the same adv.