converting a vapour flask to sqounker ?

[VapingBad]

Jul 20, 2015 17:31:52 GMT blakey said:

Jul 20, 2015 16:28:05 GMT VapingBad said:

vern I see you have been looking at this stuff recently arund the web, have you seen anywhere selling flask squonker pins?
blakey how about you?
letsavit didn't you just get the squonk bits for a flask sent to you?

Fat daddy vapes do the complete kits but not seen anywhere doing the pins on their own

Thanks, but it is just the long thin pin with the T at the top that carries the liquid on the flasks I was thinking of not the brass bit as would want a fine bore tube, but there is one in the kit just don't want most of the other stuff.

[VapingBad]

The Innokin carto pin is brass but could be made to fit, the head needs grinding down as there is a hole in the side.

[letsavit]

Haven't had time to play with mine, here's some pics that might help...








The yiloong one I wouldn't recommended, fixed pin (I think) that once bent you're buggered, very questionable chip, poor finish, buttons rattle etc. wait to see what wadiea or kangix do, buy real or yes make one....!

Compared to normal its nothing more than a fixed 510 with a pin, bottle, tube and a hole cut in the side....oh and some insulation to protect the chip from juice I assume.

[VapingBad]

Do you know if we can buy the bag of bits in you pic letsavit ?

[letsavit]

Jul 20, 2015 18:30:32 GMT VapingBad said:

Do you know if we can buy the bag of bits in you pic letsavit ?

Midlands vaping forgot to post them bits and they don't come in the box with the flask so I can only assume they have a separate stock of them. Contact them, they're quite helpful, can't see why they can't sell them separately?

[banditruss]

thx for all the info @letsavit

[VapingBad]

Jul 20, 2015 18:36:24 GMT letsavit said:

Jul 20, 2015 18:30:32 GMT VapingBad said:

Do you know if we can buy the bag of bits in you pic letsavit ?

Midlands vaping forgot to post them bits and they don't come in the box with the flask so I can only assume they have a separate stock of them. Contact them, they're quite helpful, can't see why they can't sell them separately?

I looked on their site eariler and couldn't find them, I may give them a bell tomorrow.

Thanks letsavit

[banditruss]

@letsavit any thoughts on this fasttech clone ?..
www.ebay.co.uk/itm/231621538254?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[letsavit]

Jul 20, 2015 18:55:59 GMT banditruss said:

@letsavit any thoughts on this fasttech clone ?..
www.ebay.co.uk/itm/231621538254?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

The chips playing up? if you're putting a DNA40 in it then fine you just want a case... If not you gotta sort the issue out as well. The earlier wadias had bad earths which if changing the 510 you will sort anyway.

robby knows more, is this a wadia robby?

[banditruss]

yeah didnt want to replace chip really was hoping the guy was right when he said it was the 510 as i was replacing that anyway....bearing in mind can by new kangxin for £28 ...convert that or the 40w Waidea for £41...

[banditruss]

lol that went for £23 anyway not worth the risk of the chip being knacked when it was on 10 thought worth it just for case...so looks like a new kangxin at £28 or the waidea for £41 ..conversion bits should only be about £12 or so ...but which to go for ?

[banditruss]

@letsavit did you say you got the bits from midland vaping....cant find any spares on their site at all ....strange

[Deleted]

Jul 20, 2015 18:30:32 GMT VapingBad said:

Do you know if we can buy the bag of bits in you pic letsavit ?

What bits are you after VapingBad

[letsavit]

Jul 20, 2015 19:27:33 GMT banditruss said:

@letsavit did you say you got the bits from midland vaping....cant find any spares on their site at all ....strange

With the real flask, not sure if they will sell them separately but I would like to think the money I spent I could get spares if required...!

The wadia does have the better finish IMO, brushed more like the original but it's a 3rd more......up to you?

[VapingBad]

Jul 20, 2015 19:37:51 GMT @windows said:

Jul 20, 2015 18:30:32 GMT VapingBad said:

Do you know if we can buy the bag of bits in you pic letsavit ?

What bits are you after VapingBad

I'm hopping that the long thin steel pin that the liquid goes through from the bottom of the atty to the bottls will be enough to modify the existing 510, I could easily adapt the brass pin from a carto but not keen on having the liquid going through brass all the time.  The VF bag of bits in letsavit's pic looks ideal as it has the right diameter bottles included.