fogger v5

[decoy]

if like me you have one of these but haven't used it since all these new fangled subtanks came out try drilling out the bottom air holes to the same size as the ones under the coils and wicking it same as goblin
running at 0.3 ohms and its lush(poss better than sub tank and on par with goblin)the draw is still a little tight but good for a lazy lung inhale

[phatfil]

find mine is too tight a draw even with the control removed foe maximum air in, good flavour hit tho..

[decoy]

mine was tight but i dont bother with the afc ring
found out the holes under the coils were larger than the ones in the side of the base so i drilled them the same size ,only bout mm in it but it do half open it up and i use small id coils(2mm or just under)and ill try and find the utube vid for wicking
ive had 4 tanks throw it in last 2 days which is prob more than than its had in the 6 month before

[decoy]

27min on has to be the best wicking method ive found yet

[iggy]

Nice video decoy I'm going to try this wicking method, when I build my goblin, and also my orchid.............. ready for Vapefest on Saturday. It looks perfect.

[naDiel]

I never had a problem wicking my v5.
Worked the same method as the goblin before it was posted and then the chimney bit got stuck on the coils covering bit... So if you have any tips to remove that?

[decoy]

marigold gloves and a small screwdriver in one of the air holes might work

[phtumshk]

as above after dunking it in boiling water then straight into cold a couple of times.

[naDiel]

Need to try it then
Thank you for help guys - It would definitely make rebuilding it a lot easier!