Bit the bullet

[Deleted]

Sept 4, 2015 18:55:59 GMT hijack said:

Sept 4, 2015 15:51:44 GMT @zuza said:

so just bought the ipv d2 and goblin mini nice little stealth setup am sure 
not bad £52 all in for the kit 

I have these 2 on order as well.....where did you order from @zuza. That sounds almost a China price.

redeyevapour in the uk i posted deal earlier today with dissy code redeye20 
got the ipv d2 down to £32 
redeyevapour.co.uk/product/ipv-d2/

2 instock

i tested code seems it dont work now maybe try in morning me and a few aaec users were lucky it worked 

[robby]

Between .15 ish and .2, but I dont use tanks, I`ve yet to find one that gives me the flavour of a dripper or a squonker @zuza

[Deleted]

Sept 4, 2015 19:07:08 GMT robby said:

Between .15 ish and .2, but I dont use tanks, I`ve yet to find one that gives me the flavour of a dripper or a squonker @zuza

will try them setups in the mini goblin when arrives 

[Deleted]

is that 0.02 robby i put in .3 and needed like a 50 wraps lol on steam engine

[robby]

yes, sorry lolol, usually about 7 or 8 wraps at 3.5mm diameter

[Deleted]

Sept 4, 2015 19:24:16 GMT robby said:

yes, sorry lolol, usually about 7 or 8 wraps at 3.5mm diameter

that would have been fun me doing 80 wraps lol need some sorta spaceship size tank for that

[robby]

They work great, lovin the flavour

[VapingBad]

@zuza with 3.5 mm former dual coils using 0.3 mm >0.05 ohm (D2 limit)

For 30 W se
For 40 W se
For 50 W se

see how I changed the W in the lower right then adjusted the target resistance until the heat flux icon goes green just do that if you want a diff diameter or wire.

[Deleted]

Sept 4, 2015 19:49:52 GMT VapingBad said:

@zuza with 3.5 mm former dual coils using 0.3 mm >0.05 ohm (D2 limit)

For 30 W se
For 40 W se
For 50 W se

see how I changed the W in the lower right then adjusted the target resistance until the heat flux icon goes green just do that if you want a diff diameter or wire.

thanks buddy this will help alot best do all my seeting up next weekend working the next 7 days best do all testing when nice and fresh

thanks again

[VapingBad]

It is better to have extra wraps than too few and I would probably add one for luck to begin with, just take it as a guide, it normally gives me a good starting point.

[lairey]

I've not tried TC coils in my Goblin mini yet @zuza, but you'll struggle to get 3mm ID coils in as the build deck is very ickle... 2.5mm is the max and 2mm is easier IMHO

[VapingBad]

Sept 4, 2015 21:01:33 GMT lairey said:

I've not tried TC coils in my Goblin mini yet @zuza, but you'll struggle to get 3mm ID coils in as the build deck is very ickle... 2.5mm is the max and 2mm is easier IMHO

SteamEngine with 0.3 mm Ni200

with 2.5 mm former

30 W 8 wraps
40 W 11 wraps
50 W 13 wraps

with 2 mm former
30 W 10 wraps
40 W 13 wraps
50 W 16 wraps

[Deleted]

must be my luck had 2£ in my galabingo acount and just won 54£

so this was free mod and tank and enough to buy a euro milions ticket happy days

so next mod is the dna200 

[VapingBad]

Sept 4, 2015 22:06:26 GMT @zuza said:

must be my luck had 2£ in my galabingo acount and just won 54£

free mod and tank and enough to buy a euro milions ticket happy days

Wish you would would spend it on a wig or even a hat for JJB

[Deleted]

Sept 4, 2015 22:08:39 GMT VapingBad said:

Sept 4, 2015 22:06:26 GMT @zuza said:

must be my luck had 2£ in my galabingo acount and just won 54£

free mod and tank and enough to buy a euro milions ticket happy days

Wish you would would spend it on a wig or even a hat for JJB

hehe