Discussion posts from the iSub coil head Guide

[sonicflowjoe]

Just tagging a few members who may be interested in this guide Perpetua @19steve57 nick777 wil7985 chykensa Mrsmac drunkenbum Roscopecotrain phtumshk baron osdset norfolkphil

[drunkenbum]

Nice one sonicflowjoe. Will definitely be giving this ago

[sonicflowjoe]

Sept 12, 2015 21:11:44 GMT drunkenbum said:

Nice one sonicflowjoe. Will definitely be giving this ago

Good stuff, let me know how you get on

Not as complicated as it may seem, I've just put lots of steps in there to try and be as thorough as possible. Some of the other guides I've seen for rebuilding isub coils were a bit vague to say the least...

[drunkenbum]

Sept 12, 2015 21:20:49 GMT sonicflowjoe said:

Sept 12, 2015 21:11:44 GMT drunkenbum said:

Nice one sonicflowjoe. Will definitely be giving this ago

Good stuff, let me know how you get on

Not as complicated as it may seem, I've just put lots of steps in there to try and be as thorough as possible. Some of the other guides I've seen for rebuilding isub coils were a bit vague to say the least...

You've definitely covered everything. Doesn't seem too difficult once you know how to get them apart

[Roscopecotrain]

That guide is spot on. I have 4 in my box so will be giving this a try at some point.

[flavourtank]

Nice job, I only have one of these coils and I might give it a go

[sonicflowjoe]

Nice one Roscopecotrain. Let me know how you get on. Once you know how to get in they pretty easy to do.

[Roscopecotrain]

Sept 12, 2015 21:36:30 GMT sonicflowjoe said:

Nice one Roscopecotrain. Let me know how you get on. Once you know how to get in they pretty easy to do.

Will do mate. In fact i may give it a go now.

[sonicflowjoe]

Sept 12, 2015 21:34:48 GMT flavourtank said:

Nice job, I only have one of these coils and I might give it a go

That's how I started off with one coil only so made a point of learning to rebuild. I shagged up my first attempt as I didn't know the best way to get it.

[sonicflowjoe]

Sept 12, 2015 21:38:58 GMT Roscopecotrain said:

Sept 12, 2015 21:36:30 GMT sonicflowjoe said:

Nice one Roscopecotrain. Let me know how you get on. Once you know how to get in they pretty easy to do.

Will do mate. In fact i may give it a go now.

Why not eh? No time like the present

[Roscopecotrain]

Only gone and bloody done it. 0.7 ohm coil so not as low as i wanted but working a treat.

[sonicflowjoe]

Sept 12, 2015 22:19:00 GMT Roscopecotrain said:

Only gone and bloody done it. 0.7 ohm coil so not as low as i wanted but working a treat.

Nice one, that didn't take you long...

[phtumshk]

Excellent guide sonicflowjoe

[Roscopecotrain]

Sept 12, 2015 22:36:40 GMT sonicflowjoe said:

Sept 12, 2015 22:19:00 GMT Roscopecotrain said:

Only gone and bloody done it. 0.7 ohm coil so not as low as i wanted but working a treat.

Nice one, that didn't take you long...

Was easy as hell mate following your guide. Just done a paralell build now coming in at 0.6 ohms. Happy days.

Now looking at the heads thinking clapton, twisted, temp builds.

Thank you so much.

[sonicflowjoe]

Sept 12, 2015 22:37:47 GMT Roscopecotrain said:

Sept 12, 2015 22:36:40 GMT sonicflowjoe said:

Nice one, that didn't take you long...

Was easy as hell mate following your guide. Just done a paralell build now coming in at 0.6 ohms. Happy days.

Now looking at the heads thinking clapton, twisted, temp builds.

Thank you so much.

No probs. Be no stopping you now.

Clapton coil sounds good. Not tried them yet but on my list of things I want to try at some point.

TC again I've not tried yet (bit of a vaping dinosaur me) but I can imagine from what I've read this could be a winner in the Isub. The coils will go on and on...