Pilot Vape Clapton Coils

[peter12]

Dec 9, 2015 23:39:22 GMT Get Off My Cloud said:

Dec 9, 2015 23:25:46 GMT smiley76 said:

Cheers Get Off My Cloud that's good info, because your right the battery just flys down with that velocity at 65 watts.

Right that's it then I'm buying one

I'm happy with it not in t/c mode, just wondered what it was all about, plus I hate messing about with the wires, so just bought 2 of them boxes ready made Clapton that you bought

Thanks anyway for your info much appreciated

smiley76

There's also the Wismec RX200 mate that bugger takes 3 batteries so even longer life.
UK vendor for £39.99
www.dnavapes.com/collections/variable-voltage-mods/products/wismec-rueleaux-rx200-200w

China vendor where i got mine for £29.50
www.dnavapes.com/collections/variable-voltage-mods/products/wismec-rueleaux-rx200-200w

Same link for both. Only mention as they look good. And I crave longer battery life so 3 batts is the future for me I think.

[Get Off My Cloud]

peter12 So it is, and i can't even blame drink.

fixed now.
www.efun.top/wismec-reuleaux-rx200-tc.html

[smiley76]

That seems nice and cheap, I've got £100 for a new one, so which would you go for?

I know sometimes the dearest aren't always the best.

How long before you change the Clapton coils and how long before change of cotton?

cheers Get Off My Cloud

[peter12]

What's the difference between the rx 200 and DNA 200 (other than cost) ?

[naDiel]

Dec 10, 2015 10:03:45 GMT peter12 said:

What's the difference between the rx 200 and DNA 200 (other than cost) ?

The board that runs the mod. As per name the DNA200 has the mentioned board on and is way better (as per reviews) for TC where the RX200 has a different board (not really looked into it) that is said to be poop when it comes to TC but completely fine with power mode.

[peter12]

Dec 10, 2015 10:18:08 GMT naDiel said:

Dec 10, 2015 10:03:45 GMT peter12 said:

What's the difference between the rx 200 and DNA 200 (other than cost) ?

The board that runs the mod. As per name the DNA200 has the mentioned board on and is way better (as per reviews) for TC where the RX200 has a different board (not really looked into it) that is said to be poop when it comes to TC but completely fine with power mode.

From what I hear the rx is roughly 40 ish the DNA 80-90. Is the DNA worth the extra 40?

[naDiel]

Well the DNA200 I way more versatile as you can upload different wires resistance profiles and using Escribe make it completely tailored to your needs.
So if you do use TC and want tons of different wires to be used in TC I would say YES.
Especially that you can upload battery specs and that? But I won't be able to shed too much light on it.

But if you just prefer to stick to good ol' kanthal and you not fussed about TC then NO.

[mikedidthis]

There is a break down video of the TC tests:

allaboute-cigarettes.proboards.com/post/1030571/thread

Another TC test video with firmware 1.07:



RX200 issues with TC should be resolved with a firmware update:
https://www.reddit.com/r/electronic_cigarette/comments/3v3lnq/wismec_rx_200_temperature_control/

There is a good comparison video: 

allaboute-cigarettes.proboards.com/post/1030092/thread

Hope that helps

[Get Off My Cloud]

Dec 10, 2015 8:23:40 GMT smiley76 said:

That seems nice and cheap, I've got £100 for a new one, so which would you go for?

I know sometimes the dearest aren't always the best.

How long before you change the Clapton coils and how long before change of cotton?

cheers Get Off My Cloud

The coils will last for ages, when you change wick pull the wick out and fire the coils on their own to burn off any juice left in them, give the atty and coils a rinse under a cold tap dry it off and you're good to go again..

As for the difference between the RX200 and the DNA200 the main difference is there's a software program available for the DNA200 board so the user can fine tune different settings and stuff.
The features though are to do with battery management because the board was designed to be used with LiPo packs not 18650 IMR batteries and the majority of the other stuff is to do with TC curves and settings.
If you want to get into the technical malarkey get the DNA200 if you want a mod that is more simple to use get the RX200 version.