Rebuildable Dripper switch

[liammann111]

Want to switch over to rebuildable Dripper tanks, what would be ideal for my Motofo Freak show Tiny 60 Watt, just wondered what a good Dripper tank to buy would be? also need a kit in which would be ideal for a beginner, Thankyou!

[Get Off My Cloud]

Look for versatility.

Single and dual coil airflow options.
Adjustable airflow.
Option of wide bore and standard 510 drip tips.
At least 2mm post holes.

All the above will allow you to use a wide range of build styles from pure flavour builds to full on cloud blowing builds.

I would also suggest look for something which has 4 separate post holes, less tricky to build on when coils don't share holes.
A decent sized juice well is good too 3mm or more.

Lots of options out there some good ones in my opinion are.

Twisted Messes
13 Heavens 9 Hells
Double Vision
Velocity
Alliance V2
Wotofo Sapor
Wotofo Lush

[phatfil]

pop over to FT or your prefered cheap chinese supplier and have a browse, Fasttech generally post pretty good pictures of the decks so you can judge the ease of the build, but drippers are way more forgiving to build on than tanks as the wick only needs to absorb and wick, no need to dam the flow from a tank

But saying that some drippers have some exotic build arrangements.. 'catz eye' iirc is a 4 coil jobby

If your looking to vape TC with nickel watch out for coil anchors that are likely to snap the softer nickel legs off
(screw holes that penetrate past the wire hole can be sods for that)

Juice wells with walls that are at a higher level than the coil leg holes in the posts can make a dripper a pita to coil.

but there are 100s of them many at very low prices so you can pick up 2 or 3 for a tenner and a couple of weeks wait..

fwiw my 2 current fav drippers are

www.fasttech.com/products/0/10013258/2397601-cloud-champ-styled-rda-rebuildable-dripping
and

www.gearbest.com/rebuildable-atomizers/pp_231003.html
(tho i bought it when it was a bit cheaper)

[sydsut]

I like the Mephisto as it has mahoosive postholes making coiling easy

[liammann111]

Thanks for all the replies and sorry i havent got back as i havent been online in a while, i purchased a Indulgence mutation x V4, just wondered what Ohm coil i should be building in which supports my device (60 watt Wotofo Freak show tiny) have purchased a build kit which includes an Ohm reader

[Get Off My Cloud]

You can build down to 0.1ohm on that mod but personally i would stay above 0.2ohm on any single 18650 mod.

P.S depending on your current nic level you find you need to drop the nicotine down a bit when dripping or you might get a buzz on.