alvoram
Super Member
Joined:February 2012
Posts: 2,084
Location:
Likes: 94
Recent Posts
Last Online Jun 8, 2023 1:20:08 GMT
|
Post by alvoram on Apr 10, 2012 21:09:40 GMT
They do seem to be nimh, but much lower mah than I have been buying, wonder if that's done for a reason, maybe to help ensure fuller charge/discharge cycles, what do you think? If it's a Panasonic phone I have a similar one here I use for my business line and they are Panasonic Brand 550mAh part number HHR-55AAAB. They are a sorta light orange it says they are NiMh. Available here: compare.ebay.co.uk/like/270867019232?var=lv<yp=AllFixedPriceItemTypes&var=sbar&cbt=yIt looks like my binatone :/ Although it does seem they are all low mah, nimh rechargeables, so gonna try some of those ones, cheers mate... Anyway, back on topic, what did happen to the VV mod Mark? |
|
Anne (fuzzy)
Super Member
Joined:November 2011
Posts: 5,085 
Location:
Likes: 65
Recent Posts
Last Online Jun 24, 2015 2:41:06 GMT
|
Post by Anne (fuzzy) on Apr 10, 2012 21:18:10 GMT
look good..what are they ??? They're box mods - e cigs.  |
|
|
|
Post by warlordxxx - (Mark) on Apr 10, 2012 22:08:54 GMT
nice mods. how much mark or are they all spoken for? Little ones are £12 (paypal fees & delivery included) the large one haven't set a price yet - that one i did to test everything out - but the switch on it alone was just over £5 to buy which would set it around the £28-£29 mark - the normal switches are cheaper than that and can even get the ones with square bezel fairly cheap - this one though is for me to test and i like the glowy switch so that's what i put in hehe No batteries are included with the mods as people have their own places to get them from |
|
|
|
Post by warlordxxx - (Mark) on Apr 10, 2012 22:13:39 GMT
Good job Mark......but what about the voltage display? surely he doesnt need voltage display if they are constant 3.7 volt Absolutely correct they kick out 4.2v from the offset and drop from there so no need for a voltage meter in this one i also used a 16mm switch so there wasn't enough room to put both in - the vv that i do will have a 12mm switch so should leave enough room for the vv module and the display |
|
|
|
Post by warlordxxx - (Mark) on Apr 10, 2012 22:15:40 GMT
It looks like my binatone :/ Although it does seem they are all low mah, nimh rechargeables, so gonna try some of those ones, cheers mate... Anyway, back on topic, what did happen to the VV mod Mark? By all means drop off topic anytime it's what gives AAE-C it's character ... the VV mod is still coming mate just trying to get all the bits together to fit it in nicely and turn things off and on  |
|
|
|
Post by warlordxxx - (Mark) on Apr 10, 2012 22:21:08 GMT
Phew now i just need to epoxy the whole lot up look good..what are they ??? 3.7v box mods the small ones use a rechargable protected li-ion 14500 battery (around AA size but normal AA's won't work in them) the main reason for them is once you have the mod the batteries are cheaper than getting new eGo etc batteries and should last you a longer amount of time. The larger one uses 2 18650 protected batteries (lavatube size) also li-ion but for that longer vape 2 in parallel near enough doubles the Mah rating on the battery meaning i can take that one on a very long journey in the car and it still have battery power left over when i'm done |
|
Gordy
Super Member
Joined:September 2011
Posts: 11,515 
Location:
Likes: 100
Recent Posts
Last Online Feb 15, 2013 0:28:19 GMT
|
Post by Gordy on Apr 11, 2012 1:12:47 GMT
nice mods. how much mark or are they all spoken for? Little ones are £12 (paypal fees & delivery included) the large one haven't set a price yet - that one i did to test everything out - but the switch on it alone was just over £5 to buy which would set it around the £28-£29 mark - the normal switches are cheaper than that and can even get the ones with square bezel fairly cheap - this one though is for me to test and i like the glowy switch so that's what i put in hehe No batteries are included with the mods as people have their own places to get them from thats a great price for the ickle ones Mark ...take a pic of it in hand so peeps can see how small and dinky they are... fantastic for out and about or even as a reliable backup / spare  |
|
|
|
Post by gizmondothefirst on Apr 11, 2012 6:51:46 GMT
look good..what are they ??? 3.7v box mods the small ones use a rechargable protected li-ion 14500 battery (around AA size but normal AA's won't work in them) the main reason for them is once you have the mod the batteries are cheaper than getting new eGo etc batteries and should last you a longer amount of time. The larger one uses 2 18650 protected batteries (lavatube size) also li-ion but for that longer vape 2 in parallel near enough doubles the Mah rating on the battery meaning i can take that one on a very long journey in the car and it still have battery power left over when i'm done ....And should it be needed there would be enough battery power in the mod to jump start the car! lol |
|
|
|
Post by gizmondothefirst on Apr 11, 2012 6:53:22 GMT
surely he doesnt need voltage display if they are constant 3.7 volt Its obviously been answered now but I was referring to the vv mod Mark has planned. Seems like ages ago since you got that display module Mark?! |
|
maccafan
Super Member
Joined:May 2012
Posts: 6,278
Location:
Likes: 469
Recent Posts
Last Online Nov 3, 2022 10:25:09 GMT
|
Post by maccafan on Apr 11, 2012 7:33:04 GMT
nice mods. how much mark or are they all spoken for? Little ones are £12 (paypal fees & delivery included) the large one haven't set a price yet - that one i did to test everything out - but the switch on it alone was just over £5 to buy which would set it around the £28-£29 mark - the normal switches are cheaper than that and can even get the ones with square bezel fairly cheap - this one though is for me to test and i like the glowy switch so that's what i put in hehe No batteries are included with the mods as people have their own places to get them from Those illuminating PB switches are nice... I got a 12mm hole one with a Red LED... Pricey though..I paid around £6.50 for mine and the delivery was very slow.. |
|
|
|
Post by warlordxxx - (Mark) on Apr 11, 2012 9:27:15 GMT
surely he doesnt need voltage display if they are constant 3.7 volt Its obviously been answered now but I was referring to the vv mod Mark has planned. Seems like ages ago since you got that display module Mark?! It was mate - the only thing that has stopped me building it arrived just before last weekend and that was the 20 awg wire - the 18650 boxes come with a couple of strands of wire you can just about pick your teeth with and they are far too small to accept the currents passing through them so had to wait for fresh wire - the on/off switches that i ordered and using in the 3.7v won't fit in the VV either so had to order new switches and the boxes come with a depression on the front just about where the switch will go that has to be filled in with epoxy and i had to sand it by hand as i don't have a dremel - Takes forever with nail files |
|
|
|
Post by warlordxxx - (Mark) on Apr 11, 2012 9:36:55 GMT
Little ones are £12 (paypal fees & delivery included) the large one haven't set a price yet - that one i did to test everything out - but the switch on it alone was just over £5 to buy which would set it around the £28-£29 mark - the normal switches are cheaper than that and can even get the ones with square bezel fairly cheap - this one though is for me to test and i like the glowy switch so that's what i put in hehe No batteries are included with the mods as people have their own places to get them from thats a great price for the ickle ones Mark ...take a pic of it in hand so peeps can see how small and dinky they are... fantastic for out and about or even as a reliable backup / spare Great idea Gordy here's one (taken on camera phone) bear in mind i have small hands lol the battery next to it is an trustfire 3.7v li-ion protected rechargeable and is just slightly bigger than a AA battery (about 2mm)  |
|
|
|
Post by warlordxxx - (Mark) on Apr 11, 2012 9:38:42 GMT
Little ones are £12 (paypal fees & delivery included) the large one haven't set a price yet - that one i did to test everything out - but the switch on it alone was just over £5 to buy which would set it around the £28-£29 mark - the normal switches are cheaper than that and can even get the ones with square bezel fairly cheap - this one though is for me to test and i like the glowy switch so that's what i put in hehe No batteries are included with the mods as people have their own places to get them from Those illuminating PB switches are nice... I got a 12mm hole one with a Red LED... Pricey though..I paid around £6.50 for mine and the delivery was very slow.. The 16mm one i got i got two at the same time and worked out just over £10 for the pair |
|
alvoram
Super Member
Joined:February 2012
Posts: 2,084
Location:
Likes: 94
Recent Posts
Last Online Jun 8, 2023 1:20:08 GMT
|
Post by alvoram on Apr 11, 2012 12:43:33 GMT
Wow Mark, I thought they were much bigger than that, they look brilliant in hand!
|
|
Karma
Part Time Staff
Lorraine
No Longer a Vapefest Virgin
Joined:January 2012
Posts: 21,980
Location:
Likes: 7,589
Recent Posts
Last Online May 27, 2016 17:25:37 GMT
|
Post by Karma on Apr 11, 2012 13:08:32 GMT
I have a similar one Alvo from LF. It's great for having in your pocket at work and fab in the car as it can't roll away anywhere  |
|
