Lemo Lemo drop Fill O rings

[keepitgoin]

Hi, I use Lemo V1 and Lemo Drop V1 as my All Day Tank. I've spent a pleasant morning coil building and tidying my Vape stuff and discovered I only have 2 spare Fill O rings !!!!!
 I was wondering if anyone knows of a supplier of spares?

[nanotm]

found this ukvapers.org/Thread-Eleaf-Lemo-drop-O-ring-specs

maybe it gives you the answer, sorry don't hae a lemo myself

[keepitgoin]

Nah, I tried Fasttech already, but the only spares are generic O ring seals and glass tanks. The Fill hole O ring has an extra nipple that fits into fill hole instead of fill screw.

[joeten]

There is some mention of specs re sizes here ukvapers.org/Thread-Eleaf-Lemo-drop-O-ring-specs

[Get Off My Cloud]

I don't know of anywhere that sells the fill plug ring, maybe contacting Eleaf directly they can sort you out with some.

[nanotm]

keepitgoin

well it seems elea never made any spares for their kit but you can pick up replacements for yours on the cheap here www.ebay.co.uk/sch/i.html?_odkw=lemo+oring&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xlemo+drop.TRS0&_nkw=lemo+drop&_sacat=0 although to be honest I would probably just buy a new tank, one that's already offers spares packs (or they are offered by others at least) for the price of the lemo you can get something else with a better refill system that doesn't need a specialist oring....

tbh both the tfv4 and the crius have better refill mechanisms, the crown is simpler as well (from the video's)

and given you cant find spares (because despite them being released over a year ago eleaf never made any) it might be a better bet to move to a different bit of kit /

[keepitgoin]

Thanks for looking nanotm, I appreciate it. I have other RTAs and Drippers it's just my Lemos are what I use mainly. I find them easy to coil and wick, though they do leak a wee bit.
I only Vape at 1.2-1.5 oHm mainly and like the juice capacity and Fill potential of the Lemo. A Tankful (5ishml) goes all day for me.
I've tried the V2 and a couple of other Top Fill Tanks, but haven't been impressed so far with the ease of filling as it seems you need a syringe to fill them and I carry a standard 10ml Unicorn bottle with me. I haven't seen any that are Single Coil MTL either, and the Top Fill ones I've tried leak worse than the Lemo for me!

[Brynglas]

I contacted eleaf a while ago about obtaining o rings for both V1 and V2 Lemos.
They gave me the info of the sizes i needed but would not/could not supply the rings themselves.

[keepitgoin]

Cheers Brynglas, but I'm looking for the Fill Port O ring, it has a Nipple on it that fits into the fill hole instead of the teeny, tiny, bloody hell dropped it on the carpet, fill screw. As a filling method for a Bottom Fill RTA it's the best method I've seen, but just didn't take off in other devices

[nanotm]

Mar 6, 2016 20:23:42 GMT keepitgoin said:

As a filling method for a Bottom Fill RTA it's the best method I've seen, but just didn't take off in other devices

perhaps that's because a simple tip it upside down unscrew, pour in the e-juice screw back on takes the same amount of effort as tipping it upside down removing the fill plug and refilling it...


top fill is a lot simper, granted the majority are not primarily dual coil bases although its my understanding most of the other units can easily be converted as such

indeed the crius  for example has 2 simple single coil build options or the subtank mini clone that comes with top fill 9.5mil tank or the any number of other RBA configuration tanks that are similar /larger in size

but like everything its all about what you prefer, I am merely pointing out that since there are zero spares for the part in question the only realistic options are buy a new kit (either the same thing again or something different)

just don't think that because your preferred build is single coil there is any real obstacle to you doing that with something else, (I often prefer the single coil builds to the multi coil ones, indeed the tfv4-r1 is my normal deck despite having the -r2 and -r3 versions as well)

[Brynglas]

Mar 6, 2016 20:23:42 GMT keepitgoin said:

Cheers Brynglas , but I'm looking for the Fill Port O ring, it has a Nipple on it that fits into the fill hole instead of the teeny, tiny, bloody hell dropped it on the carpet, fill screw. As a filling method for a Bottom Fill RTA it's the best method I've seen, but just didn't take off in other devices

Yes buddy understood what you are after.I mailed eleaf over full service kits.
Sorry to say mate,don't think you'll get any help there.Seemed no after sales service at all.