New mech

[urbanvape87]

was looking at pre-ordering this seems to look ok, maybe I'll wait for release and reviews to come in.
what do you guys think.

[Get Off My Cloud]

At $28 can't knock it, some more detauls on the Geekvape site.
www.geekvape.com/project/karma-kit/
Bargain for a copper mech and RDA/RDTA

[Get Off My Cloud]

Video review

[urbanvape87]

Thanks much appreciated

[ukwarrior]

I quite like the look of that mod, and for the price, including an RDA, it is a bargain.

I realised quite a while ago that for me at least, low cost mechs were ideal. I have a large regulated collection, and a fair few mechs, but each of these mechs have been under £30. My two best performers are a all copper, JA clone, which was only $11 and bought with FT points. I didn't expect much due to the price, but it is a solid performer.

The other was more expensive at £24, a Wototo Phantom, but it is probably my favourite performance wise. I see some mechs that go for hundreds of pounds, which is fine if you are into high end mechs, but for the most of us a much cheaper mod will still perform very well for us and keep us happy for much less.

I think I will have to order myself one of these due to the price, thank you for sharing it

[urbanvape87]

Dec 2, 2016 11:01:06 GMT ukwarrior said:

I quite like the look of that mod, and for the price, including an RDA, it is a bargain.

I realised quite a while ago that for me at least, low cost mechs were ideal. I have a large regulated collection, and a fair few mechs, but each of these mechs have been under £30. My two best performers are a all copper, JA clone, which was only $11 and bought with FT points. I didn't expect much due to the price, but it is a solid performer.

The other was more expensive at £24, a Wototo Phantom, but it is probably my favourite performance wise. I see some mechs that go for hundreds of pounds, which is fine if you are into high end mechs, but for the most of us a much cheaper mod will still perform very well for us and keep us happy for much less.

I think I will have to order myself one of these due to the price, thank you for sharing it

No probs uk warrior, as I said I'm pretty new to the mechs and am a while away from putting and prebuilt coil on one as my regulated mod still shows my coils are a tiny bit off jumping from 0.9 ohms to 0.93 and back down to 0.9, I'm sure this is due to the amount of wraps I'm doing and the fiddly posts on my wraith squonker!

I've also ordered a coppervape bf and a atty to go with it, but like I say some practise on the building of my reg mod until I get it spot on then I'll be moving on!

[Get Off My Cloud]

Resistance rises as the coil gets hotter and drops back down again as it cools.

[ukwarrior]

Dec 2, 2016 11:16:30 GMT urbanvape87 said:

Dec 2, 2016 11:01:06 GMT ukwarrior said:

I quite like the look of that mod, and for the price, including an RDA, it is a bargain.

I realised quite a while ago that for me at least, low cost mechs were ideal. I have a large regulated collection, and a fair few mechs, but each of these mechs have been under £30. My two best performers are a all copper, JA clone, which was only $11 and bought with FT points. I didn't expect much due to the price, but it is a solid performer.

The other was more expensive at £24, a Wototo Phantom, but it is probably my favourite performance wise. I see some mechs that go for hundreds of pounds, which is fine if you are into high end mechs, but for the most of us a much cheaper mod will still perform very well for us and keep us happy for much less.

I think I will have to order myself one of these due to the price, thank you for sharing it

No probs uk warrior, as I said I'm pretty new to the mechs and am a while away from putting and prebuilt coil on one as my regulated mod still shows my coils are a tiny bit off jumping from 0.9 ohms to 0.93 and back down to 0.9, I'm sure this is due to the amount of wraps I'm doing and the fiddly posts on my wraith squonker!

I've also ordered a coppervape bf and a atty to go with it, but like I say some practise on the building of my reg mod until I get it spot on then I'll be moving on!

As you are new to mechs, all I can say is stay safe, and enjoy them too! As long as you follow basic safety, you will be fine using one. 

Like @get Off My Cloud  said, resistance increases as coils heat up. It is how TC works, and why Ni200 was first used-this has a pretty huge rise in resistance, and why Kanthal TC can not currently be done. Kanthal has an almost unnoticeable increase in resistance, at least so small it is too little for a mod to regulate temperature by reading resistance. 

What material is it your coils are made from? As that is still a pretty small increase in resistance. I tend to notice around 0.03 to 0.06 max increase with SS316L, are they SS by any chance? If so I would say that is a pretty normal increase and is not due to your RDA or building. 

You have some nice bits on the way, I hope you enjoy it and the new RDA when it arrives. Do show us all in the vapemail thread