back to vaping a need a little help/advice please

[Perpetua]

Dec 29, 2016 18:16:32 GMT c1booth said:

Dec 29, 2016 18:10:23 GMT djs said:

Most of my stuff comes out at over 66% VG, sometimes nearer 70%. I don't even like VG!

with my new kit I've started on the shop told me I need certain juice which was 80/20 so thought id have to mix like that if I was to do my own

In all honesty you can use any PG/VG ratios for subohming Chris pre-made or home mix . . . . it's just that you won't be creating such a dense cloud cover with higher PG ratios!

More important is the strength that you choose, otherwise you'll find yourself having a massive nic rush - I use 6mg, many of the folk on here are on considerably lower.

[djs]

Perpetua has covered it.

You don't genuinely need 80/20 liquid for subohm tanks.

I sub-ohm with 60/40 or even 50/50 juice when I can be bothered to mix it properly.
You just don't want any thinner than that or you might have leaking issues.

[c1booth]

Thanks
Has anyone any knowledge of cleaning or rewicking baby beast could
I don't really fancy the rba as I've only ever worked on pro tank could and even that was an arse hahaha

[chykensa]

Although I haven't used the RBA deck for a Baby Beast c1booth, it will be a darn sight easier than a Protank!! The deck is completely open, with loads of room to work on, and there are many many tutorials on YouTube to peruse before you start to help you on your way.
BB RBA deck inc. new larger glass - I can't find a picture at this time of night, but I'm sure some other kind soul will source one for you so that you can see how easy it is. It will in all probability come already with coils installed (check they are really tight before using), so all you have to do for the first few months - yes, months! - will be dry burn to remove any crud and gunk and then re-wick with cotton and away you go once more.
Don't forget we are here to help should you get into difficulties

[Perpetua]

www.fasttech.com/product/5069700-authentic-smoktech-smok-tfv8-replacement-v8-rba

Looks doable even to me!

[chykensa]

Thanks Perpetua!

[jtc]

Yup
Looking at that deck I would definitely be using it, even if you bought ready made coils to put in it. It would work out cheaper. As far as making juice you don't even have to buy pg. If your nic is suspended in pg and as most concentrates are then just adding them to your vg is good enough. That's what I do anyway. As it's max vg I find the juice takes longer to steep but it becomes a lovely cloudy smooth vape. Plus it's not as quick to start flooding things

[minime]

The RBA for the tfv8 baby beast and tfv8 big baby are very easy to work on and that's coming from someone that gets very wound up coiling and wicking.

[jtc]

Dec 30, 2016 14:11:06 GMT minime said:

The RBA for the tfv8 baby beast and tfv8 big baby are very easy to work on and that's coming from someone that gets very wound up coiling and wicking.

Believe him
They end up thrown over the fence literally

[sydsut]

Dec 30, 2016 14:11:06 GMT minime said:

The RBA for the tfv8 baby beast and tfv8 big baby are very easy to work on and that's coming from someone that gets very wound up coiling and wicking.

I see what you did there, it should be the coils that get wound up.

[minime]

Haha it's true iv been known to flatten the leaky dry hitting little fookers with my hammer to in temper lol.

[jtc]

Dec 30, 2016 17:55:49 GMT minime said:

Haha it's true iv been known to flatten the leaky dry hitting little fookers with my hammer to in temper lol.

Can just imagine that