Joytech Egrip OLED

[greendollar]

long shot but if anyone has an old egrip with some life left in it could they get in touch if they're willing to sell , it's the one that takes the rebuildable base , unless someone knows if/where I can find a rebuildable base for the egrip VT ......mine must be due to pack up as it's been my daily like ...forever

thanks GD

[Postmodern Smoking]

Is THIS what you are looking for greendollar ?

[ETA] 30% coupon code: HOL30

(Disclaimer: I've never used this company before)



Also from HERE (£4.99) or from China: HERE

[phtumshk]

Jan 14, 2017 22:52:31 GMT Postmodern Smoking said:

Is THIS what you are looking for greendollar ?


[ETA] 30% coupon code: HOL30

More likely the CL bases Dave.
Couldnt buy em in this country or china when the oled first came out dunno if thats changed.
I kind of did a group buy and bought a shed load from Germany IIRC.
Theres a cl base for sale on ebay from china but he wants £6+ each for em.(EEK!)

[greendollar]

Thanks for the replies , got several rebuildable bases but they only fit the OLED not the VT , can't find one that fits the VT hence the hunt for discontinued OLED versions of the egrip

[phtumshk]

Ah right, I remember now the VT had the screw out 510/chimney pipe bit.
Thats why the RBA dont work then.
I never bought the VT after the OLED, for some strange reason I still prefered the original 1 lol.

[phtumshk]

Its a long shot but you could try drilling the top of an RBA out to the same diameter as a CL coil so the chimney pipe/grommet fits in the RBA.
Or send 1 my way and ill drill it out for ya.

[greendollar]

Jan 15, 2017 0:19:10 GMT phtumshk said:

Its a long shot but you could try drilling the top of an RBA out to the same diameter as a CL coil so the chimney pipe/grommet fits in the RBA.
Or send 1 my way and ill drill it out for ya.

Cheers , just been having a look & think by taking a mil or two off the base & chimney I can get it to fit

[phtumshk]

Jan 15, 2017 0:55:51 GMT greendollar said:

Jan 15, 2017 0:19:10 GMT phtumshk said:

Its a long shot but you could try drilling the top of an RBA out to the same diameter as a CL coil so the chimney pipe/grommet fits in the RBA.
Or send 1 my way and ill drill it out for ya.

Cheers , just been having a look & think by taking a mil or two off the base & chimney I can get it to fit

Good luck with it.

[blakey]

Jan 15, 2017 0:55:51 GMT greendollar said:

Jan 15, 2017 0:19:10 GMT phtumshk said:

Its a long shot but you could try drilling the top of an RBA out to the same diameter as a CL coil so the chimney pipe/grommet fits in the RBA.
Or send 1 my way and ill drill it out for ya.

Cheers , just been having a look & think by taking a mil or two off the base & chimney I can get it to fit

In the top section of the cl attie you'll find that there is a press fitted insert, knock that out and it'll fit the VT like it was made for it

[greendollar]

Cheers Blakely ,

Done that lovely fit but I'm back to why I don't like my VT one bit resistances jumping about all over the place . low atomizer one second fine the next , chuck it in old faithful & its works like a dream ......so still hunting for old OLED'S if anyone comes across one as losing old faithful is gonna be as painful as losing a leg when she finally gives up

[blakey]

www.voodoovape.co.uk/products/joyetech-30w-oled-egrip-kit-1500-mah

[blakey]

-eGrip-OLED-KIT-Free-UK-Shipping-1-DAY-FLASH-SALE-/282326688474?_trkparms=aid%253D222007%2526algo%253DSIC.MBE%2526ao%253D1%2526asc%253D20150519202351%2526meid%253D070fdf2479d744eea50e45b0493857f6%2526pid%253D100408%2526rk%253D1%2526rkt%253D8%2526sd%253D162194166923&_trksid=p2056116.c100408.m2460

Well that went well didn't it
eBay have them for £22

[greendollar]

Jan 15, 2017 16:25:17 GMT blakey said:

-eGrip-OLED-KIT-Free-UK-Shipping-1-DAY-FLASH-SALE-/282326688474?_trkparms=aid%253D222007%2526algo%253DSIC.MBE%2526ao%253D1%2526asc%253D20150519202351%2526meid%253D070fdf2479d744eea50e45b0493857f6%2526pid%253D100408%2526rk%253D1%2526rkt%253D8%2526sd%253D162194166923&_trksid=p2056116.c100408.m2460

Well that went well didn't it
eBay have them for £22

you beauty Blakey

got a horrible feeling that a VT is going to be in the box not an OLED

[greendollar]

Fears confirmed , VT not an OLED turns up today but good news .....it came with destructions on how I should have been resetting the mod when putting in a new coil , who'd a thunk it , well not me , so I have two fully working new VT's with the rebuildable bases so all is well in the GD household & old faithful has now been retired still working after a solid 2 yrs of service

[blakey]

Jan 18, 2017 14:02:19 GMT greendollar said:

Fears confirmed , VT not an OLED turns up today but good news .....it came with destructions on how I should have been resetting the mod when putting in a new coil , who'd a thunk it , well not me , so I have two fully working new VT's with the rebuildable bases so all is well in the GD household & old faithful has now been retired still working after a solid 2 yrs of service

I have had an oled working since the day they were released and it's used daily. I also have a couple of original egrips that are still going too. Cracking mods.
I have 8 spare oleds still unopened, 4 egrip VTs still unopened and 3 original egrips still unopened. That should see me through a good few years

And I have a stash of CL bases and CL rebuildable atties with a large pack of o-rings and seals. For MTL vaping when out and about I don't need anything else.