Need a decent mouth to lung atty

[scaffman69]

Right guys i need a little help i`ve been using an Aspire Nautlius atty cus i just don`t get on with lung inhales too much, anyhow i`ve had the aspire nautilus for some time now, but i just smashed the glass so i ordered new, but i`m just wondering your thoughts on best type of mouth to lung type atty as im fancying summink new and a change, i`ve gvot a few subtanks i use now n then with lesser nicotine juices, but these are no good for the general way i`m vaping. Cheers all.

[djs]

I don't use my Mini Nautilus any more. I will not support Aspire any more by buying their products, all the good it will do (which is no good, I accept).

Instead, I use Eleaf GS tanks quite often.

I also have
Cubis - a useless tank and coils that are only suitable for the bin. An embarrassment to Joyetech.
Tron S - ugly and way too expensive (I paid £6 which was about 60% off the price at the time).... I like this because it takes CLR coils which are quite good.

People seem to like the Joyetech tanks that take the CLR coils. If you can bag a cheap one, then maybe.

[Pepperty]

I prefer mouth to lung, and I'm using some high end atomisers (but they do all have clones)

I like the facility for juice control so use Merkeva (by Chels) Calix (by Leo) Tilemahos (GG) and Squape RS (StattQualm) Only the Calix is glass, others are polycarbonate so it depends on what juice to which tank...

Another option, if you quite like nautilus coils is the Beyond Vape Silo as its 5ml capacity and attractive on the eye, also you might like to try a Kabuki (clone) as they use same small nautilus coils.

The Aspire Triton is mtl with higher ohm coils, and uses same coils as the aspire atlantis tanks which are more airy. I have triton mini's and I can use nautilus or triton coils and visa versa and they are great, slightly airier than a nautilus and capacity is less than the full sized but as its top fill I find that no problem.

[silvasurfa]

www.ivapour-elixir.co.uk/atomisers/astral-tank.html
Silva

[pyr0]

Kayfun Lites are still my go-to MTL tanks
I pretty much gave up buying tanks because I found them all to be rubbish compared to the old KFL/+
Fairly recently I've gotten a Spheroid v4 and I've picked up a kayfun mini v3 which isn't bad (but still a waste of £)..
but I still prefer the vape from the older Kayfuns.. I just wish you could access the coils easier after filling.

[car147]

SXK and SJMY Kayfun 5 Clones from FT would be my choice. I also use the original and there's virtually nothing in it other than cost.

[quincey43]

Feb 8, 2017 15:00:54 GMT silvasurfa said:

www.ivapour-elixir.co.uk/atomisers/astral-tank.html
Silva

I've seen this mentioned before, is it really a good MTL tank, looks interesting!!

[silvasurfa]

Feb 8, 2017 16:31:26 GMT quincey43 said:

Feb 8, 2017 15:00:54 GMT silvasurfa said:

www.ivapour-elixir.co.uk/atomisers/astral-tank.html
Silva

I've seen this mentioned before, is it really a good MTL tank, looks interesting!!

yes, there is a review here:-

Silva

[domesticextremist]

Feb 8, 2017 11:39:19 GMT djs said:

Instead, I use Eleaf GS tanks quite often.

What resistance coils do you use with these?

[thebishman]

Can you build your own coils?

[djs]

Feb 8, 2017 17:03:19 GMT domesticextremist said:

Feb 8, 2017 11:39:19 GMT djs said:

Instead, I use Eleaf GS tanks quite often.

What resistance coils do you use with these?

The 1.2ohm from Fasttech.
I found the TC coils "did not function in the appropriate manner"
Not convinced by the 0.75 either, although I hear some people have no bother.

[maxlawbr]

I'm a MTL vaper.

All said in this topic is right and I aprove, in my taste I prefer Merkawa, KF 5 and KF Lite, my biggest problem concerning KF Lite is the inability to fill it without a screwdriver, besides that fact is a fantastic atty, easy to build, reliable and resistant.

[domesticextremist]

Feb 8, 2017 17:36:11 GMT djs said:

Feb 8, 2017 17:03:19 GMT domesticextremist said:

What resistance coils do you use with these?

The 1.2ohm from Fasttech.
I found the TC coils "did not function in the appropriate manner"
Not convinced by the 0.75 either, although I hear some people have no bother.

Ta, I'm becoming sorely tempted - I see the 16.5mm version for just £9 and understand the heads are a doddle to recoil (just as well 'cos they ain't cheap)

[Roscopecotrain]

Feb 8, 2017 11:23:29 GMT scaffman69 said:

Right guys i need a little help i`ve been using an Aspire Nautlius atty cus i just don`t get on with lung inhales too much, anyhow i`ve had the aspire nautilus for some time now, but i just smashed the glass so i ordered new, but i`m just wondering your thoughts on best type of mouth to lung type atty as im fancying summink new and a change, i`ve gvot a few subtanks i use now n then with lesser nicotine juices, but these are no good for the general way i`m vaping. Cheers all.

This is about to be released.

allaboute-cigarettes.proboards.com/thread/66844/new-aspire-nautilus-2

[djs]

Feb 8, 2017 19:42:15 GMT domesticextremist said:

Ta, I'm becoming sorely tempted - I see the 16.5mm version for just £9 and understand the heads are a doddle to recoil (just as well 'cos they ain't cheap)

For you, yes ('coz you are good at it)...

For me, the bin wins.

If I'm going to 'build' I build on RTAs.

(Although I do rebuild CLR coils)