cant get clieto to fire on coolfire iv - help

[clivealive1]

hi
I cant get clieto to fire on coolfire iv (70w)- help
1 /. Cleito works fine on an alien
2/. tried in wattage mode at 35 watts - nothing
3/. coolfire works fine with naulitilus

[dalealan]

Try wiggling the 510 pin up slightly on the cool fire. Failing that is the coil within the cool fire range?

[clivealive1]

May 5, 2017 20:35:01 GMT dalealan said:

Try wiggling the 510 pin up slightly on the cool fire. Failing that is the coil within the cool fire range?

its 0.4     40-55 watts so sure it is

[dalealan]

May 5, 2017 20:41:33 GMT clivealive1 said:

May 5, 2017 20:35:01 GMT dalealan said:

Try wiggling the 510 pin up slightly on the cool fire. Failing that is the coil within the cool fire range?

its 0.4     40-55 watts so sure it is

Any low ohm or short error messages at all on the screen. If it's reading the resistance ok then I'm stumped. It's normally down to the connection between the mod and the atty but it wouldn't have shown the resistance on the mod if there was a problem. Have you tried swearing at it??

[clivealive1]

May 5, 2017 20:54:20 GMT dalealan said:

May 5, 2017 20:41:33 GMT clivealive1 said:

its 0.4     40-55 watts so sure it is

Any low ohm or short error messages at all on the screen. If it's reading the resistance ok then I'm stumped. It's normally down to the connection between the mod and the atty but it wouldn't have shown the resistance on the mod if there was a problem. Have you tried swearing at it??

yes i used a few bad words , could it be the battery 20a ?    works on naultilus tho

[clivealive1]

it fires a little at 14 watts from being set up for naultilus but when i turn up , nothing

[dalealan]

Has the resistance changed when you attached the clieto? Take it off, hit the fire button so it says no atty then screw it back on and try.

[clivealive1]

just tried a few other batteries and its working , must have been that yipppeeeee
Thanks all

[twig]

I'm new to the forum but by no means new too vaping,I'm glad you got this sorted.
The Nautilus & cleito are my favourite tanks.
I have the coolfire iv 100tc though and for some reason the coolfires I've had after the original are plagued with issues. I definitely prefer the original!

[clivealive1]

May 28, 2017 13:35:35 GMT twig said:

I'm new to the forum but by no means new too vaping,I'm glad you got this sorted.
The Nautilus & cleito are my favourite tanks.
I have the coolfire iv 100tc though and for some reason the coolfires I've had after the original are plagued with issues. I definitely prefer the original!

yes great tanks , also like the naultlus x (4ml tank)

[skold]

May 28, 2017 15:56:06 GMT clivealive1 said:

May 28, 2017 13:35:35 GMT twig said:

I'm new to the forum but by no means new too vaping,I'm glad you got this sorted.
The Nautilus & cleito are my favourite tanks.
I have the coolfire iv 100tc though and for some reason the coolfires I've had after the original are plagued with issues. I definitely prefer the original!

yes great tanks , also like the naultlus x (4ml tank)

I wasn't a huge fan of the Nautilus x prefer the triton mini & nautilus mini.

[clivealive1]

Jun 11, 2017 22:24:42 GMT skold said:

May 28, 2017 15:56:06 GMT clivealive1 said:

yes great tanks , also like the naultlus x (4ml tank)

I wasn't a huge fan of the Nautilus x prefer the triton mini & nautilus mini.

now its working , i prefer it over the naultilus mini tbo especially with 4 ml tank.  coils last forever compared too.

[kingerax]

My smok cloud beast king fires perfectly on the Cool Fire IV TC100 (built in battery version). Performs really well even at 90 watts.

But on my kangertech subox nano, nothing below a 0.5 ohm coil seems to work and the ohm display flashes at me - this was using a TFV8 baby tank. At first I was frustrated but then I was like - 'actually, that's awesome all my safety features work! And in fact it's working spot on'.

Out of interest, what's the lowest ohm the cool fire IV can read?

[clivealive1]

Jun 12, 2017 11:35:40 GMT kingerax said:

My smok cloud beast king fires perfectly on the Cool Fire IV TC100 (built in battery version). Performs really well even at 90 watts.

But on my kangertech subox nano, nothing below a 0.5 ohm coil seems to work and the ohm display flashes at me - this was using a TFV8 baby tank. At first I was frustrated but then I was like - 'actually, that's awesome all my safety features work! And in fact it's working spot on'.

Out of interest, what's the lowest ohm the cool fire IV can read?

I think its 0.1 vw

[Bluefish]

Jun 13, 2017 12:13:23 GMT clivealive1 said:

Jun 12, 2017 11:35:40 GMT kingerax said:

My smok cloud beast king fires perfectly on the Cool Fire IV TC100 (built in battery version). Performs really well even at 90 watts.

But on my kangertech subox nano, nothing below a 0.5 ohm coil seems to work and the ohm display flashes at me - this was using a TFV8 baby tank. At first I was frustrated but then I was like - 'actually, that's awesome all my safety features work! And in fact it's working spot on'.

Out of interest, what's the lowest ohm the cool fire IV can read?

I think its 0.1 vw

That's correct, I have a tank at the mo it reads -1 on only one mod on all the others it's -09 and won't fire, a right pain in the ass, i'll tell you.
\