which RDA would you choose?

[beedee]

I'm keen on the Hussar at the moment, but all good suggestions above.

This is your archetypal AAEC shopping thread, you start it wanting to narrow down 5 choices and end up coming out with 10...

Enjoy whatever you get, ticktockman.

[ticktockman]

Sept 6, 2017 20:51:41 GMT beedee said:

I'm keen on the Hussar at the moment, but all good suggestions above.

This is your archetypal AAEC shopping thread, you start it wanting to narrow down 5 choices and end up coming out with 10...

Enjoy whatever you get, ticktockman .

haha yes you are not wrong 

I've just popped a 2.5 id 4 wrap twisted wire build in my Hussar 
not sure I'm getting the optimal flavour from it with this build however
what is your preferred build beedee?

[decoy]

ive got a hadaway clone and apart from the clamps being a bit of a faff its not 3 bad
currenty running a 5 warp 3.5mm id 0.32ohm coil of claptoned this stuff
www.wireandstuff.co.uk/products/25-AWG--0.68mm-x-0.27mm----SS316L-Grade-Stainless-Steel-Flattened-Wire--Round-Wire-Made-Flat----10-Metre-Spool-480.html#SID=125
and its nuts lol
also running it none claptoned in the mini velocity clone and it ,s double nuts


jtc it works in tc on the dna

[jtc]

Sept 7, 2017 6:42:59 GMT decoy said:

ive got a hadaway clone and apart from the clamps being a bit of a faff its not 3 bad
currenty running a 5 warp 3.5mm id 0.32ohm coil of claptoned this stuff
www.wireandstuff.co.uk/products/25-AWG--0.68mm-x-0.27mm----SS316L-Grade-Stainless-Steel-Flattened-Wire--Round-Wire-Made-Flat----10-Metre-Spool-480.html#SID=125
and its nuts lol
also running it none claptoned in the mini velocity clone and it ,s double nuts


jtc it works in tc on the dna

Looks worth a try that. I'm in no rush as I'm really enjoying the fused ss but I'll definitely keep it in mind for the future 🤔😊👍

[decoy]

Sept 7, 2017 7:55:36 GMT jtc said:

Sept 7, 2017 6:42:59 GMT decoy said:

ive got a hadaway clone and apart from the clamps being a bit of a faff its not 3 bad
currenty running a 5 warp 3.5mm id 0.32ohm coil of claptoned this stuff
www.wireandstuff.co.uk/products/25-AWG--0.68mm-x-0.27mm----SS316L-Grade-Stainless-Steel-Flattened-Wire--Round-Wire-Made-Flat----10-Metre-Spool-480.html#SID=125
and its nuts lol
also running it none claptoned in the mini velocity clone and it ,s double nuts


jtc it works in tc on the dna

Looks worth a try that. I'm in no rush as I'm really enjoying the fused ss but I'll definitely keep it in mind for the future 🤔😊👍

its about the same flavour as a 2x 0.4 ss fused clapton thats my current fave in it but next to no spitting (just put none claptoned one in lol)and it will be making its way in to the tf8
only prob is the tc curve needs a tweak to get temps accurate but it dont dry hit so alls good

[jtc]

Sept 7, 2017 8:05:01 GMT decoy said:

Sept 7, 2017 7:55:36 GMT jtc said:

Looks worth a try that. I'm in no rush as I'm really enjoying the fused ss but I'll definitely keep it in mind for the future 🤔😊👍

its about the same flavour as a 2x 0.4 ss fused clapton thats my current fave in it but next to no spitting (just put none claptoned one in lol)and it will be making its way in to the tf8
only prob is the tc curve needs a tweak to get temps accurate but it dont dry hit so alls good

Im using the Djlsb vapes ss curve and find it really good 👍😊

[beedee]

Sept 7, 2017 2:48:04 GMT ticktockman said:

Sept 6, 2017 20:51:41 GMT beedee said:

I'm keen on the Hussar at the moment, but all good suggestions above.

This is your archetypal AAEC shopping thread, you start it wanting to narrow down 5 choices and end up coming out with 10...

Enjoy whatever you get, ticktockman .

haha yes you are not wrong 

I've just popped a 2.5 id 4 wrap twisted wire build in my Hussar 
not sure I'm getting the optimal flavour from it with this build however
what is your preferred build beedee ?

I have Caterpillar Clapton 5 wraps on a 2.5mm jig, wicking with Japanese Cotton
. Comes out around 0.42ohm.  I have the airflow about as small as I can get it and am using it on the Boxer mech mod. You can get the wire  at Fastech.

I've not long been using the wire, but very impressed so far, a fast ramp up for a Clapton, and it's my first build in the Hussar, loving it! 

[ticktockman]

I've bit the bullet and gone for Hadaly due to the promise of flavour
and le concorde as the single air hole option for mtl was tempting

I'll probably grab a few more options soon enough, as this squonking malarkey is becoming quite fun

Thank you all for your help and advise