Leaking tank help!

[Jerri]

Got the new iSub B today. I’ve used iSub G/V for ages now and never had any leaking issues.

Tank arrived this morning. Filled. Left to prime. Was blown away by the new mesh coils. All was fine. Refilled and the juice just started peeing out the air flow holes. And now I can’t get it to stop doing that.

All the o rings look fine and in place. The tank is the same coil system as the previous iSubs. Using 80vg juice.

Any tips?

[Perpetua]

No real idea in all honesty Jerri, like you I've never had any leakage issues with any of my iSub's . . . . could just be a dodgy coil, I've just had the same issue with an authentic Cletio coil. First fill fine, second fill - eliquid just spewed out! Changed the coil and all has been good since.

Or you could try closing off the airflow when you refill to see if that makes any difference.

[Jerri]

Feb 8, 2019 17:58:33 GMT Perpetua said:

No real idea in all honesty Jerri, like you I've never had any leakage issues with any of my iSub's . . . . could just be a dodgy coil, I've just had the same issue with an authentic Cletio coil. First fill fine, second fill - eliquid just spewed out! Changed the coil and all has been good since.

Or you could try closing off the airflow when you refill to see if that makes any difference.

Thanks. Will swap the coil for a standard iSub one as they’re backwards compatible and see if that helps. Will use one I know isn’t leaking. It’s so annoying when you lose a tank full. I thought It was me not screwing it together properly so I just refilled and realised when it did the same it wasn’t!

Edit - swapped the coils, put the coil from a standard isub g in the b and the b coil in the g. the G started leaking so hopefully it was the coil, have put the second mesh coil in the B and put a small amount of juice in. Hopefully it was just the coil because I was blown away by the flavour, but worse case is I use the iSub G coils in it, so if the coils are crap I can still use the tank.

[Jerri]

Feb 8, 2019 17:58:33 GMT Perpetua said:

No real idea in all honesty Jerri, like you I've never had any leakage issues with any of my iSub's . . . . could just be a dodgy coil, I've just had the same issue with an authentic Cletio coil. First fill fine, second fill - eliquid just spewed out! Changed the coil and all has been good since.

Or you could try closing off the airflow when you refill to see if that makes any difference.

Thankfully it looks like just a dodgy coil. I’m seriously blown away by these coils. The flavour is amazing. Never tried mesh before!

[Perpetua]

Feb 11, 2019 18:13:00 GMT Jerri said:

Feb 8, 2019 17:58:33 GMT Perpetua said:

No real idea in all honesty Jerri, like you I've never had any leakage issues with any of my iSub's . . . . could just be a dodgy coil, I've just had the same issue with an authentic Cletio coil. First fill fine, second fill - eliquid just spewed out! Changed the coil and all has been good since.

Or you could try closing off the airflow when you refill to see if that makes any difference.

Thankfully it looks like just a dodgy coil. I’m seriously blown away by these coils. The flavour is amazing. Never tried mesh before!

Me neither Jerri! But needless to say you've got me interested now.

Are these they?

www.vapourcore.com/innokin-plex-3d-mesh-coils-5-pack.html

[Jerri]

Feb 11, 2019 21:08:02 GMT Perpetua said:

Feb 11, 2019 18:13:00 GMT Jerri said:

Thankfully it looks like just a dodgy coil. I’m seriously blown away by these coils. The flavour is amazing. Never tried mesh before!

Me neither Jerri! But needless to say you've got me interested now.

Are these they?

www.vapourcore.com/innokin-plex-3d-mesh-coils-5-pack.html

That’s them. I’ve got a standard iSub V with a 0.5ohm coil and one of these mesh coils on the iSub b. The flavour of the mesh coil is blowing the standard coil out the water and the standard iSub coils aren’t any slouch!

I don’t know if they are as long lasting yet obviously and you can’t rewick them but the coils are backwards compatible so will work on all the iSub tanks.

They’re rated 35-55w and I’m running if at 35w which is the same as I run the 0.5 standard ones. So they don’t need a lot of power. It’s outshining the Claito flavour wise.

[Perpetua]

Feb 11, 2019 22:05:06 GMT Jerri said:

Feb 11, 2019 21:08:02 GMT Perpetua said:

Me neither Jerri! But needless to say you've got me interested now.

Are these they?

www.vapourcore.com/innokin-plex-3d-mesh-coils-5-pack.html

That’s them. I’ve got a standard iSub V with a 0.5ohm coil and one of these mesh coils on the iSub b. The flavour of the mesh coil is blowing the standard coil out the water and the standard iSub coils aren’t any slouch!

I don’t know if they are as long lasting yet obviously and you can’t rewick them but the coils are backwards compatible so will work on all the iSub tanks.

They’re rated 35-55w and I’m running if at 35w which is the same as I run the 0.5 standard ones. So they don’t need a lot of power. It’s outshining the Claito flavour wise.

Thanks Jerri . . . I think it would be very remiss of me not to give these a try in the interests of research!

( ETA: And done - 2 packs ordered. )

[Jerri]

Feb 12, 2019 1:46:18 GMT Perpetua said:

Feb 11, 2019 22:05:06 GMT Jerri said:

That’s them. I’ve got a standard iSub V with a 0.5ohm coil and one of these mesh coils on the iSub b. The flavour of the mesh coil is blowing the standard coil out the water and the standard iSub coils aren’t any slouch!

I don’t know if they are as long lasting yet obviously and you can’t rewick them but the coils are backwards compatible so will work on all the iSub tanks.

They’re rated 35-55w and I’m running if at 35w which is the same as I run the 0.5 standard ones. So they don’t need a lot of power. It’s outshining the Claito flavour wise.

Thanks Jerri . . . I think it would be very remiss of me not to give these a try in the interests of research!

( ETA: And done - 2 packs ordered. )

Let me know what you think!

[Perpetua]

Feb 12, 2019 2:55:18 GMT Jerri said:

Feb 12, 2019 1:46:18 GMT Perpetua said:

Thanks Jerri . . . I think it would be very remiss of me not to give these a try in the interests of research!

( ETA: And done - 2 packs ordered. )

Let me know what you think!

Tried these yesterday for the first time Jerri . . . . filled up with some Gin's Addiction, how brilliant are these coils - loving them so far!

[Jerri]

Mar 11, 2019 4:31:40 GMT Perpetua said:

Feb 12, 2019 2:55:18 GMT Jerri said:

Let me know what you think!

Tried these yesterday for the first time Jerri . . . . filled up with some Gin's Addiction, how brilliant are these coils - loving them so far!

I was going to ask if you’d had chance to try them!

I changed the coil last night and I’ve got drip hacks blue slush in there so a real coil killer. So around 5 weeks. Not the same longevity as the original iSub coils and can’t be rewicked but the flavour is so good.

Plus once FT start stocking them they’ll be even cheaper.

So glad you liked them!

[Perpetua]

Mar 12, 2019 16:47:33 GMT Jerri said:

Mar 11, 2019 4:31:40 GMT Perpetua said:

Tried these yesterday for the first time Jerri . . . . filled up with some Gin's Addiction, how brilliant are these coils - loving them so far!

I was going to ask if you’d had chance to try them!

I changed the coil last night and I’ve got drip hacks blue slush in there so a real coil killer. So around 5 weeks. Not the same longevity as the original iSub coils and can’t be rewicked but the flavour is so good.

Plus once FT start stocking them they’ll be even cheaper.

So glad you liked them!

I absolutely love them Jerri! Better even than the Cleito and standard 0.5 iSub coils which are both good for me - these though take the flavour in Gin's Addiction to a new level!

Even if FT don't have them in ( I've been checking ) I'd certainly buy them again as 5 weeks is pretty good going for a stock coil.

[Jerri]

Mar 12, 2019 18:54:19 GMT Perpetua said:

Mar 12, 2019 16:47:33 GMT Jerri said:

I was going to ask if you’d had chance to try them!

I changed the coil last night and I’ve got drip hacks blue slush in there so a real coil killer. So around 5 weeks. Not the same longevity as the original iSub coils and can’t be rewicked but the flavour is so good.

Plus once FT start stocking them they’ll be even cheaper.

So glad you liked them!

I absolutely love them Jerri! Better even than the Cleito and standard 0.5 iSub coils which are both good for me - these though take the flavour in Gin's Addiction to a new level!

Even if FT don't have them in ( I've been checking ) I'd certainly buy them again as 5 weeks is pretty good going for a stock coil.

Yeah, I've not touched the cleito since getting the iSub B, and bought another to go with my teo iSub V tanks.

Innokin don't seem to get a lot of love in the tank department but I've loved every one I've tried.

[B Road Blaster]

I know your saying five weeks but in reality roughly how many ml do you think that would be ?
As time means nowt if your only using 2ml a week
I'm not trying to be a smart arse i just find it easier to work in amounts rather than time.

[Jerri]

Mar 12, 2019 20:09:46 GMT B Road Blaster said:

I know your saying five weeks but in reality roughly how many ml do you think that would be ?
As time means nowt if your only using 2ml a week
I'm not trying to be a smart arse i just find it easier to work in amounts rather than time.

No I don’t think you’re trying to be a smart arse at all.

Around 100ml. Keeping in mind drip hacks use A LOT of sweetener and are real coil killers.

I’ve got another one on the go which has had around 80ml of custard through it and showing no signs of needing to be replaced.

I know that may not seem a massive amount these days with some tanks running at 100w plus and drinking juice like it’s going out of fashion but that’s vaping at 35w.

[B Road Blaster]

Mar 13, 2019 1:58:28 GMT Jerri said:

Mar 12, 2019 20:09:46 GMT B Road Blaster said:

I know your saying five weeks but in reality roughly how many ml do you think that would be ?
As time means nowt if your only using 2ml a week
I'm not trying to be a smart arse i just find it easier to work in amounts rather than time.

No I don’t think you’re trying to be a smart arse at all.

Around 100ml. Keeping in mind drip hacks use A LOT of sweetener and are real coil killers.

I’ve got another one on the go which has had around 80ml of custard through it and showing no signs of needing to be replaced.

I know that may not seem a massive amount these days with some tanks running at 100w plus and drinking juice like it’s going out of fashion but that’s vaping at 35w.

Ah thank you !  that make more sense to me now TBH i think thats not bad going for a stock coil 
I must be honest i have been looking at the sub b for a couple of weeks now just not sure if i want to go for a 24/25 mm tank as they would not 
fit on my pico and also overhang a bit on the danni box as well.
But i could use a older isub at 22mm with the newer coils.
BTW i only vape at 25w