How to clean my Clearomizers?

[ciar]

Had a search on the forum, but didn't find much, would some kind person give me a clue how to clean my vision ego clearomizers please?

I did watch a couple of youtube vids but they looked complately different to the ones i am using, i was thinking of pouring out the liquid that's left and then running the tap in to the top and clearing it that way, but I can't see how you would be able to dry the insides.

any tips or pointers or videos would be blinding

[esmecullen]

All you do ciar is half fill with water, & shake, do that a few times & blow through it a few times to get rid of excess water and let dry........... that simple

[ciar]

Jun 19, 2012 7:35:58 GMT esmecullen said:

All you do ciar is rinse & shake, blow through it a few times to get rid of excess water and let dry........... that simple

blinding, that's what i was going to do lol, but didn't in case there was some complicated scientific vaping way of doing it ;-)

Will sort that out this evening, thank you kindly.

[blakey]

Jun 19, 2012 7:37:23 GMT ciar said:

Jun 19, 2012 7:35:58 GMT esmecullen said:

All you do ciar is rinse & shake, blow through it a few times to get rid of excess water and let dry........... that simple

blinding, that's what i was going to do lol, but didn't in case there was some complicated scientific vaping way of doing it ;-)

Will sort that out this evening, thank you kindly.

#

Use hand hot water and half fill the vision , then as asme says shake and blow through, repeat 3 or 4 times. When you re-fill with your juice you'll find that the first few puffs will be a bit dire with poor vapour but don't be put off as it will soon clear through.

[esmecullen]

Had to alter my 1st post a bit ciar............ to include the bit about water...........but thats all you do

Oh btw............ a quick dry burn now and then as well

[ciar]

thank you thank you, that's my task for this evening sorted, just before the footie!

dry burn, aka without liquid inside i presume? admittedly i didnt do this first time round, will make sure to do it this time.

[esmecullen]

Yes......... no liquid, just a few quick bursts should do it. Dont do it each time you clean but say every 4 fills or depending on what juice you are using, someone will correct me if I am wrong, but I think the heavier/thicker the juice is, it will clog your vision so a quick dry burn every so often will help

[ciar]

Jun 19, 2012 7:56:20 GMT esmecullen said:

Yes......... no liquid, just a few quick bursts should do it. Dont do it each time you clean but say every 4 fills or depending on what juice you are using, someone will correct me if I am wrong, but I think the heavier/thicker the juice is, it will clog your vision so a quick dry burn every so often will help

lovely cheers for that info..

[womble]

I find it better to pull off the little silicone cap inside with the metal tube, by using a pair of thin nosed pliers, if you don't grip too hard, you can pull on the metal tube and it should come straight out (with a bit of a squeeze sometimes)

With this removed, the vision washes better. Wash out with warm water (I leave mine to soak a while as well) then I find it better to dry them in the sun, or on top of a boiler etc, before dry burning.

When the wick is dry and you dry burn, it doesn't take very long at all. You want about 6 seconds of power, then apparently about 20 secs of rest, the dry burn is complete when the coil heats up to red hot almost straight away.

Then replace the silicone cap and fill.

I find it easier to just put a tiny bit of moisture/or juice on the end of the cap when you are inserting it. It helps getting it back into the plastic tube and sliding it onto the metal tube.

[blakey]

By far the better option when you come to replace your visions are these little beauties www.safercigs.co.uk/Vision_eGo/cat705284_1372126.aspx
They dismantle for cleaning, everything just unscrews. They are superb

[ciar]

Jun 19, 2012 8:34:33 GMT blakey said:

By far the better option when you come to replace your visions are these little beauties www.safercigs.co.uk/Vision_eGo/cat705284_1372126.aspx
They dismantle for cleaning, everything just unscrews. They are superb

much easier, mine are the ones that come with the vape escape 900 the vision ego, look just the same, will be placing an order for a few of those come payday on Thursday ;-)