Cud someone please identify this model ggts?

[jayjay]

Hopefully the pic will come out!
I picked up my ggts today from another forums classified. Its unusual in that it has no brass end cap, only a flat brass head. The centre section is all ss (chrome looking), The locking nut simply unscrews to a loose position to prevent activation,.although I might not have figured it yet, but it doesn't function like others I've seen on yt. . And lastly the head part is just like a deep hole more than a place to attach stuff?
Its nice and shiny, and very happy with it but just wanted to check it appears ok?
Many thanks

[OneDay]

jayjay you need to put all the link inside the tags

not http://l

but http://l

[jayjay]

Doh, knew id get it wrong way round. Sorry about pic, it was a discreet look whilst on train.


http

[jayjay]

Hopefully this time ?

[jayjay]

I've got other bits and pieces with it, but this is the ggts part?
I thank you.

[OneDay]

I can't help with the id, but the pic is up ok

[Batdragon (AKA Batty)]

does it have the GG embelum engraved into it? it might also have a number on it

[Gordy]

the pic isnt the best angle but the switch doesnt look like it is screwed all the way into the GG tube...it should be screwed all the way to the jagged bit.

does your bottom cap have the battery post with battery spring attached like in the image



the switch should then make contact with the battery post when you activate the button

are you talking about the bottom cap... that should be brass unless its been changed or upgraded from s stealth

[Sandra (aka Chillax)]

Not sure what you mean about the hole?

[blakey]

It's a first batch type ss GGTS, The head part that you mention is designed for cartomisers, to use anything else on there you need a couple of 510-510 adapters, tip here- remove the innards from one of the adapters so that the connector pin on the ggts goes right through it and makes contact with the second adapter, that'll shorten the telescopics a bit If you got odysseus with it then purchase a odysseus to ggts base for the ody and all you need to do is remove that top cap and it'll screw right on top and provide the mother of all aids to the draw- air-flow control via the top control ring
All the technical gen you require is here goldengreek.co.uk/store/images/ggts%20guide.pdf

[jayjay]

Hi sorry for not getting back sooner and thanks for replies. I've been busy at work. I just wanted to check it was all there only looked slightly different to what I was expecting. I believe I'll have to get a locking nut as that one definatley ain't like the reviews. It will work but wont be as secure as id like. It appears theres no actual thread on the button piece to lock it. Ill do some more homework, I have apparently got that base piece blakey aswell but like I say. More homework required! Aswell as batteries!

Heres what I have regarding the ggts itself. And it is engraved with seriel number








lh4.googleusercontent.com/-dI42zyS-pcI/UAmkhoLYycI/AAAAAAAABj8/Rb0wqFGstmg/s1600/2012-07-20%25252017.47.30.jpg[/img]

[jayjay]

[blakey]

Now you really need a kick in there, seriously!
Once kicked and with odysseus on a ggts base you are going to be blown away

[Gordy]

it all looks present and correct

[eyebrook]

Where is the rethreader? or did I miss it