Recent Posts

Menthol dissolves in PG,might be worth adding some to sort the problem.Ive had this happen to me once and i was not a happy bunny,the vendor put it rite so im sure if you e-mail the vendor they will sort you out.

Im so very glad i sold my Provari now,prices for VV mods are the lowest ive ever known atm.Im sure that when the Kick is released they will plummet even further. :)If i find the lava tube good i will be ordering a couple more for sure.

Ive just finished doing it and im very pleased with the results.Rite,basically when you look at a strand of the group buy wick its fluffy looking and you can see little strands of the glassfibre which come off easily when handling the wick or making a coil.What i did was to wrap a 5 turn coil of 0.20mm wire around two strands of the 1mm wick,i havent boiled or washed this wick at all.I then took my fag lighter and burnt the wick on all sides evenly for a few minutes until pure white.All of the small strands which easily come off when handling were instantly burnt away and im left with a smooth wick similar to the Bulli stuff.While burning the wick held up very well and didnt set fire or charr at all which is good.I added the coil to my RTA and primed the wick and coil in the usual manner ensuring the full length of wick was wet and ready to vape.I did notice that the juice absorbed ALOT quicker into the wick which i can only assume is due to its new smoother consistancy.All i can tell you so far is that the juice is flowing perfectly and im getting full flavour the same as Bulli and CE2 wick which is a massive bonus,no funky wick taste whatsoever and worked perfect from the off.From my basic experimentations what i think is that the Bulli and CE2 wick is pre burned and this stuff is not.It makes sense to me now why the Bulli and CE2 wick give great flavour from the off as im getting identical results from this groupbuy wick after pre burning it.I love the Bulli and CE2 stuff as it dry burns and cleans so well,after pre burning the groupbuy wick its also now dry burning clean which is a massive bonus as i was finding it charred easily and would not clean well.I will carry on with this coil now and see how it goes and how long it lasts and report back.For me personally pre burning the wick has improved its performance tenfold,hope others find the same as me.

O.k my results so far I boiled 7 strands of the 3mm wick and four strands of the 1mm wick in a pan for approximately 10 minutes.Took the pan off the boil and rinsed the wick with cold water.I then took a small cup and started to squeeze the excess water from the wick into the cup.My water was also a slightly cloudy/milky colour.I set out the wick on a radiator and left for half an hour to dry.I took the wick off the radiator and it was quite brittle due to the heat, but easily fluffed out again in seconds by rolling it about in my hands :)Ive always struggled most getting rid of the wick taste with the 3mm wick, so i made a coil up for my RTA with one strand of 3mm wick using 5 turns of 0.20mm wire.Primed the coil and wick and set my VV to 3.9v,WOW,instant flavour and no wick taste whatsoever.Ive been using this coil for around half an hour now and emptied half the tank.Its going very well and i can taste pure Golden Burginia and no wick taste whatsoever.I will try the 1mm wick out on the RDA tomorrow and see how that goes but it seems to me that boilng/washing this wick does indeed help it to work and wick alot better.A big thanks to Blakey as i wouldnt have considered washing the wick to be honest,its most definately helped the group buy wick to work even better which is great.I will try burning this wick tomorrow and see if that has any positive effects on its performance

Yeah,it definately seems to me some wicks need more breaking in than others.Ive got some of the 1mm and 3mm group buy stuff on the boil now Will see if it makes any difference to the way it works tomorrow.Im also going to pre burn some of the group buy wick and see if that has any positive effect on wicking.Ive noticed this wick doesnt dry burn to well so if its pre burned it may clean up better like the Bulli and CE2 stuff.God knows but its worth an experiment to see what happens innit?lol.

I ordered 8m of Cam's CE2 wick and it is thicker than the Bulli stuff so doesnt need doubled like the Bulli wick.I find that when you build a coil if you prime the coil well,and the wick length all the way to the holes it starts wicking off perfectly.Ive found the CE2 wick fills all of the hole and stays set very well so you get a perfect flow of juice.As for boiling wick,ive never ever had such poor wicking as to have to do this.Bulli wick,group buy 1mm stuff and CE2 wick have all worked fine to be honest.I do find with the group buy stuff you get a slight wick taste for the first ten minutes but then it goes.I find that the RTA works the same as the Arry clearomiser tank,if you hold your device in such a way to keep the juice flowing up towards the coil area then it works its best.I love this CE2 wick in the RDA Blakey,full flavour and works from the off,it also cleans and dry burns very very well.Ive been running my coil for a fortnight and its been pure bliss