promark
Full Member
Joined:April 2013
Posts: 133 
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on Jun 2, 2013 12:59:11 GMT
You could try Promark, it won't do any harm to.  Although I find my Custard/Dessert flavours taste that bit better in an Evod than a Nova, possibly because one is a bottom coil and the other a top. Ye gonna give it a go just cleaning it out now syringed the juice into the evod so much better with one air holes blocked, might have to try blocking one of the vivi air holes too Seems like the BCC seem to be better all round in my experience, might have to get a Protank |
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on Jun 2, 2013 11:33:45 GMT
Well I have now recoiled with 3mm silica 5 wraps of .20 came out at 2.1 ohms so much better now Still going to try a dual coil head, or maybe even try 2 coils in the normal head Having just bought some GVC and doing a direct comparison with an evod getting nowhere the same flavour with the vivi, is there anything I can do apart from trying a dual coil as mentioned above Is it worth laying a length of wick over the top of the coil as I have seen mentioned in other threads some say it improves flavour some say different |
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on Jun 1, 2013 9:32:05 GMT
Is it a protected battery don't think they will work in a vamo I have seen that said before but had no difficulties at all with protected batteries ??? Good to know, i have read it on a few vendors websites when I was buying mine, never tested it out tho |
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on Jun 1, 2013 9:18:56 GMT
Is it a protected battery don't think they will work in a vamo
|
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on May 30, 2013 10:12:37 GMT
Just email Grant, the address is on the website telling him what you want, he may take a day or so to get back, but I have some coming tomorrow, is £14.90 delivered for 30ml in the UK
|
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on May 29, 2013 10:38:33 GMT
Update: Received both items this morning 1st class package so could only have posted yesterday or maybe Saturday all brysoni23 had to do was let me know he hadn't posted when he said he would all would have been good. giles bought the DID off him and as of last night when i PM'd him hadn't received either but am guessing he received this morning also. On a side note he could have cleaned them out first before sending but apart from that all in good condition at first glance |
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on May 28, 2013 21:05:03 GMT
brysoni23 Still not received am also getting a bit fed up with your lack of response to anything you have been online and not bothered to reply I've just pm'd him asking him to respond so we'll see if he does or not now. Thanks @simate as you can see from the thread I paid him last Tuesday 21st and he said he would post the next day and that's the last contact I have had. Anyway we shall see |
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on May 28, 2013 9:28:04 GMT
brysoni23 Still not received am also getting a bit fed up with your lack of response to anything you have been online and not bothered to reply
|
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on May 27, 2013 10:41:13 GMT
Well I have now recoiled with 3mm silica 5 wraps of .20 came out at 2.1 ohms so much better now
Still going to try a dual coil head, or maybe even try 2 coils in the normal head
|
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on May 27, 2013 9:55:11 GMT
Good selection at ebn ferro free delivery too CLICKY |
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on May 26, 2013 23:27:30 GMT
giles, ah i see now, will definitely try the dual coil head, don't think i will try putting 2 coils in the normal single coil head, but then again nothing ventured and all that Regarding the forming I thought that is what you meant but wasn't sure, I use a straightened paper clip but something slimmer may well be better I may well re coil it tomorrow with a single 3mm wick rather than the stock 4 spindly ones to see if any better
|
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on May 26, 2013 22:32:04 GMT
giles, good guide mate, a couple of questions couldn't quite understand where the 4 wires for the 2 coils end up do 2 go outside the rubber bung and the other 2 through the rubber bung to then get trapped by the pin and you mention using a pin rather than a needle to form the coil, what do you mean by that Cheers
|
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on May 26, 2013 22:14:41 GMT
I have never owned a Vivi Nova, although I have thought about getting one. Someone said that it vaped too airily for their taste. I have a theory on airy vapes. All you need to dois restrict the air inlet. First locate the air inlet hole or holes. If you cant find it/ them, do the following. Take a good drag, and halfway through, change from sucking to blowing. Vapour will come out of the air hole. If there are two holes, cover one with your finger and try a drag. If this is better, cover the hole with a small sticker or a piece of sticky tape. If there is only one hole, try covering it with a sticker. Then make a tiny hole in the sticker with a needle. Gradually enlarge the whole until you get the desired result. I have often thought that someone should make a device with a variable air inlet. A bit like the choke on a carburretor. It would have too uses, finding the ideal vapour air ratio, and also a means of cutting down by gradually increasing the air over a period to give less nicotine. There are 2 air holes just above the 510 thread and have filled one with candle wax draw is a lot better but still not much flavour or vapour giles, I may give the dual coil heads a go thanks for the link Perpetua no don't have a plinth but think I may have cured that with a bit of wax, let's hope it does just need running in thanks for all the input guys |
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on May 26, 2013 17:24:44 GMT
One thing with tapatalk you won't be able to use it for this forum, or any proboard forum
|
|
promark
Full Member
Joined:April 2013
Posts: 133
Location:
Likes: 42
Recent Posts
Last Online Dec 23, 2019 8:51:34 GMT
|
Post by promark on May 26, 2013 17:03:53 GMT
Did you dry-burn it before you started. Sometimes (25%) they have really oily coils....yuk..... I did a bit but maybe not enough What head are you using. (Total watts?) Vamo on 9 watts at the mo but is tasting slightly burnt, is reading 2.6 ohm resistance Panic not, please.....if it fires, you'll get it vaping, just might need to make your own head...... Not panicking, was thinking about making my own Where's it from? Here |
|
