jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Nov 7, 2016 18:46:44 GMT
As the title suggests any recommendations for a place to get a big pack of batteries? (As cheap as possible!)
Running my two sets of Samsungs and slowly but surely they are running low on steam and dreading the day I am left without. Made worse by having to repair one of them with electrical tape as the top got caught on the charger whilst taking out without care :/
Sorry if wrong part of the forum!
Cheers all!
Sent from my iPhone using Tapatalk
|
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Nov 4, 2016 10:16:46 GMT
One little issue I will add.... when powering down you get a dialog box to say yes or no....I have noticed my mod is still firing on its own whilst powering down with that box and nothing I can do to stop it.
It also has out of the blue massively Increased the Wattage and given an extremely powerful fire rather than the 40w that was set. Hopefully just software/firmware issue.
|
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Nov 3, 2016 22:03:41 GMT
Hey! Again been some time since being back around here! Hello to the new people and hey to the old timers  I picked up this G-Priv today to go with my existing Cuboid 150 that is starting to show some signs of wear and tear!, From what I have seen this is pretty new in the UK so I will give it a day or so and put a little review together and possibly upload something to my YouTube Channel. (its my Motorbike 'vlogging/review'channel so trying to decide if it is worth creating a new one or not! - www.SouthCoastBrummie.com - redirects you to my page if you are interested..) So yeah, so far so good! Very impressed and really easy to use (touch screen seems pretty spot on!). only had the use of it for a few hours now so I cant really give an in-depth look at it but that will come shortly. Any other people have this? What is your thoughts so far? J   And to compare the size against my cuboid.....  |
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Nov 3, 2016 20:47:42 GMT
|
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Mar 18, 2016 0:21:08 GMT
Same box as before, cuboid but with a Griffin RTA that I picked up at a local b&m shop for using when driving. Fitted a couple Clapton coils and the vape/flavour is amazing!  |
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Mar 16, 2016 16:56:34 GMT
Tesla 80W TC & Sigelei Moonshot  This looks really really nice! Shame I have gone off the tanks now and pretty much exclusively drip, because that tank looks epic! |
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Mar 16, 2016 16:53:48 GMT
 JoyTech Cuboid 200w with my Nixon RDA with twisted kanthal coils at 0.4ohms and some yummy custard flavoured juice. Tonnes of vapour and so much flavour  |
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Mar 16, 2016 16:30:09 GMT
definitely worth considering putting some nicotine base by and looking at DIY mixing, its the nicotine thats going to be under strictest regulation, all the other constituents for e-juice are outside the scope of the TPD. It has a good shelf life in the freezer too.Afaik currently the well respected vendors for quality nic base are stocked up, and the clock does start ticking soon. See hearing that makes me a little more relaxed as the aim is to totally cut out the nic ASAP in my personal plan. Already down to low levels but juice just doesn't have the same thing as with having nic base |
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Mar 16, 2016 13:13:06 GMT
Hey guys n gals, Still been vaping the last year or so whilst I have been away from this forum, but I have lost touch from all this legal malarkey. In a nut shell, are we buggered come March? I don't know if to start bulk buying which is going to be difficult but obviously don't want to be caught short Trying to put all the various bits of info together but nothing is definitive on wtf is happening. Getting pretty worried as recently heavily into RDA and cloud chasing etc. Spent a small fortune on kit  |
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Mar 14, 2016 22:08:05 GMT
You can see the coil on the left is not connected as well as the one on the right as the one on the right has changed colour when pulsing. Yup think you may be correct, I pulled it all out and started afresh and seems to be much better. Tried some of my Decadence Chateau with it and much more clouds / vapour around 60W. When I picked up these Clapton pre made coils I also grabbed a pack of twisted Kanthal coils, and they produce some amazing results in my Nixon. Totally hooked on RDAs now |
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Mar 13, 2016 23:36:40 GMT
Good evening my fellow Vapours. I have a question for any with experience with using Clapton coils. I am using 2x 0.45 ohm Clapton kanthal coils on a Aromizer RDA by SteamCrave that comes out at 0.4ohms on a Joytech Cuboid 150. Trying around 23/28 watts. No temperature control that I am aware of is on as its just in power mode. The issue is I do not seem to be getting any decent vapour production, wicking is fine (same way as I would do on any other RDA and works fine), coils seem to be setup correctly? And the coil had no hotspots with a nice even glow before wicking. this is the first time I have used the SteamCrave RDA fresh from the shop and the first time using pre made coils. Could it be the the RDA?, maybe the lack of air holes at the bottom? I took out the "flavour" cyclone thing from the Steam Crave and put the straight through pipe on the RDA (cloud chaser) but made no real difference. Any ideas?   turn wattage up 0.4ohms normally require 40+ watts Tried and went up to around 60 still nothing decent. I was wondering if anyone else had used this RDA and maybe If it was using the Clapton setup, figured it should have more flavour & cloud production. |
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Mar 13, 2016 23:30:02 GMT
Good evening my fellow Vapours. I have a question for any with experience with using Clapton coils. I am using 2x 0.45 ohm Clapton kanthal coils on a Aromizer RDA by SteamCrave that comes out at 0.4ohms on a Joytech Cuboid 150. Trying around 23/28 watts. No temperature control that I am aware of is on as its just in power mode. The issue is I do not seem to be getting any decent vapour production, wicking is fine (same way as I would do on any other RDA and works fine), coils seem to be setup correctly? And the coil had no hotspots with a nice even glow before wicking. this is the first time I have used the SteamCrave RDA fresh from the shop and the first time using pre made coils. Could it be the the RDA?, maybe the lack of air holes at the bottom? I took out the "flavour" cyclone thing from the Steam Crave and put the straight through pipe on the RDA (cloud chaser) but made no real difference. Any ideas? |
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Mar 13, 2016 19:35:22 GMT
Lol reading back to this now I wish I had seen a "sqonk" mod. RDA and driving is such a ball ache. Every red light feels like countdown to get a couple drops in  |
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Jan 14, 2016 19:09:24 GMT
well stocked motor there  when i started vaping i was chuffed to find my 21yr old shed of a motor has nice mod sized recesses built into the door arm rests, room for 2 x mini mods or 1 x big job that and soft silicone bump and pothole friendly to my teeth drip tips and im a happy vaping motorist, Ooooo yes. Tones of work kit and a very vital box in the boot....priorities you see lol  I figured if I'm doing on average 2800 miles per month I need to chuck something together that's easy to throw in the boot/house. Main reason to going back full into vaping is the fact it's a company car, so absolutely no smoking at all. Plus I was getting the itch to play about with the mods again. |
|
jakethevape
Super Member
o.0?
Joined:November 2011
Posts: 870
Location:
Likes: 191
Recent Posts
Last Online Dec 13, 2022 15:29:07 GMT
|
Post by jakethevape on Jan 14, 2016 19:05:12 GMT
A repeat image - the mod and atty change regularly but the car doesn't (I'm very tidy in the car - the only place I am - I keep a spare bottle of liquid in the door pocket)  Very nice mod and car - see I need to get myself something to clip into the vents to pop it in, and possibly one of those EeasyDrippers that's kind of built into a sat nav style window holder. Because after all, don't drip and drive....... Seriously lol. Red light dripping is what I have resorted to, so the motorways can end up being so so soooooo long. .P |
|
