vapevictim
Junior Member
Joined:August 2015
Posts: 78 
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Jan 9, 2019 19:17:31 GMT
Awww thank you that is great I was lost I'm ok doing a one on onew mix but then trying to alter ratios after that melts my brain, its ok cuz i use isolate crystals in a 1000mg to 10ml mix and u add that strength to the then big mix stuff, he just needed it to be the same ratio as the 10ml bottle if u know what I mean, thank you so much x
|
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Jan 9, 2019 14:20:41 GMT
About 3 yrs lol but hi everyone hope you're all still doing good and keeping off the ciggies, it was a quick mixing Q I had and I made a 100ml batch of 50/50 vg/pg liquid for a mate but I need to know how to up that bottle to 65% pg to stop cbd isolate crystalising .... would anyone please know how many ml pg I would need to add to get it to that ratio...my maths is shocking and calculators are not much good at altering a premixed ratio.
Thanks peeps and nice to bb
VV
|
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Mar 9, 2016 22:01:39 GMT
Now that is a nice piece of work in progress, how it should be done  |
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Mar 9, 2016 21:24:47 GMT
the www.instructables.com/ site is fine as is with its built in peer review, just look at the comments attached to the 'projects' as anyone who would consider replicating should be canny enough to do without prompting. post a daft concept and you will be told.. anyone with a instructables login should post a link to this place in the comments for those projects to help guide and educate anyone inspired by them.. I do agree for the most part, I'm just thinking if there are people daft enough to make these and post it there are people daft enough to just go ahead and do it, there are still a lot of up votes and comments saying it is a great idea and sadly not everyone thinks things through |
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Mar 9, 2016 21:21:41 GMT
My Fav.........can i use the coil from a lightbulb.....FFS  and the reply !!!! Depends on the bulb but it will most likely burn within seconds, even with the low voltage. Worth a try though  |
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Mar 9, 2016 20:45:32 GMT
Wonderful! Some of My fav. bits:- '..& it's made entirely from household materials...' (Shame the house is now gone!!!) 'The body is made of (sic) a wooden plank..' (I can see a few planks liking this anyway!) '...using wire from the inside of a hair-dryer...'  No, sorry, I can't be arsed building it; I'll just do wot I always do.....wait for the FT clone! And love the spelling of the word Punisher lol |
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Mar 9, 2016 20:30:40 GMT
I think it is really irresponsible of instructables to allow things like this, no wonder the law is on everyones backs when you can advertise how to lose half your face in 9 easy steps sheesh  |
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Mar 9, 2016 20:13:36 GMT
|
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Mar 4, 2016 15:44:47 GMT
The fishbone with its bottom entry air in would be a tricky one to use with a single coil and enjoy it fully, some crafty finger blocking may work, but its not an ideal one for single coils granted.. check your plume vail though,if similar to my FT clone the top cap should spin closing off one or both the upper air slots, the 2 x sets of 3 holes lower down on the body piece can be raised up over the well lip or pushed down and twisted round to open or close the 2 x air holes in the juice well wall providing you with an option for a very tight draw to quite a wide open vape. the bottom well holes to line up with the 3x cap holes are in line with the coil terminals, not clearly visible in the pic.. these when used exclusivly provide a very tight draw indeed, Though mine is a clone so may not be a 1:1 copy and if so i am shooting wide.. OOps..  www.fasttech.com/products/0/10009122/2037102-plume-veil-styled-rda-rebuildable-dripping If yours is different, may i suggest you consider a punt on the above its a very versatile rda and one of my favs  and for £4.30 shouldnt bust the vape budget.. you will need to appriciate blingy attys tho I will def give that a go looks far better than the one i got from ebay for a tenner ty  |
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Feb 29, 2016 13:46:22 GMT
you dont NEED to fit 2x coils or the max number possible, one will work too many offer the option to cut off airflow on one side too especially for single coil builds, Its not like a tank atty where the coil wick is generally essential to dam the flow of juice into the combustion chamber something accomplished by dripping with an rda.. On the plume veil and fishbone RDA's you have no options to shut off air flow to individual coils only all open or all closed so 2 on the plume and 3 on the fishbone is necessary or you get too much air to vape ratio and it affects the flavour too being weaker, to me anyway, but I do only build 1 coil on my sub tank mini RBA. Cloud production is not what I am interested I vape because it satisfies the nicotine addiction I still have from when I smoked but I do think it is best to get the best from your RBA/RDA possible by following the instructions of whatever tank or dripper you may have. |
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Feb 26, 2016 21:16:11 GMT
I thought I had 26 gauge its actually 24, and I cannot achieve anything higher than 0.26 - 0.37 idk what I'm doing wrong but clearly something, soooo glad I've got premades in. Just ordered some more 26 gauge too. Try 8 or 9 wraps should give you somewhere between 0.4 and 0.5ohm. You could use a 3mm rod too if there's enough space in those drippers for 3mm coils, that should give you a resistance between 0.5 and 0.6ohm. Also nip the post screws down after you pulse the coils, pulsing can cause the screws to loosen slightly which will affect your resistance reading. Thank you so much, I'll try that on the plume veil, idk if I'll get that many wraps on the fishbone xs but I'll wait until my 26 gauge comes next week for that. |
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Feb 26, 2016 21:01:54 GMT
Hi peeps, just wondered if cig-eliquid have a working current discount code at all please? To Celebrate five years since I opened my web shop. I will be announcing a discount code at the start of March. Oh fabulous stuff thank you for replying  I shall order then then as March is my Bday too so I'll get me some vape mixing treats  |
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Feb 26, 2016 20:58:18 GMT
trying to build dual coils on a plume veil RDA and a fishbone xs ( both are clones) but the fishbone is sooooooo fiddly I think I fail there but would really like to try it , it looks like a nice piece of kit and I've heard u get good vape and flavour with it.
|
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Feb 26, 2016 20:55:27 GMT
I thought I had 26 gauge its actually 24, and I cannot achieve anything higher than 0.26 - 0.37 idk what I'm doing wrong but clearly something, soooo glad I've got premades in.
Just ordered some more 26 gauge too.
|
|
vapevictim
Junior Member
Joined:August 2015
Posts: 78
Location:
Likes: 67
Recent Posts
Last Online Jan 9, 2019 19:47:29 GMT
|
Post by vapevictim on Feb 25, 2016 15:06:34 GMT
Silver Innokin iTaste MVP 3.0 Pro 60W from fasttech
|
|
and for £4.30 shouldnt bust the vape budget.. you will need to appriciate blingy attys tho
I shall order then then as March is my Bday too so I'll get me some vape mixing treats 