innokin mvp help required

[dmclean156]

hi. got my innokin today and am running it with a dual coil iclear 16. im struggling to get my head round the settings. ive tried a few based on tables found on various sites, but they all seem to be for single coil clearos. can anyone point me in the right direction?

[barrynorton]

If it's not the v2 there only is one setting: voltage. I run my iClear16s at 4v. Just click either the V- or V+ and it will show the puff counter for a couple of seconds then the voltage setting, which you can adjust up or down. Don't put it too high or you'll get a burned taste.

[Perpetua]

Welcome to you dmclean156.


If it's a V1 you may find this useful:



And here's one for the V2




Popping your thread onto the General Vaping Board as it's a device that might be a little advanced for many new or would be vapers.

[Roscopecotrain]

I agree with barry. I am using one now with an iclear 16 and have it set on 4v. It will be different for each juice you use and for each person as every juice and every person has there own sweet spot. Best way is to start at 3.5v work up until it tastes burnt. When you get the burnt taste back it up 0.1 or 0.2 volts and there is your sweet spot.

Sent from my Galaxy Note 2

[Roscopecotrain]

Oh and if you have the version 2 it is the same with watts. Start low and work up.

Sent from my Galaxy Note 2

[Deleted]

I only ever use iClear 16s and 30s and use them at 9 watts or 4.5 volts. I find the best place to start with a dual coil is to multiply the single coil setting by one and a half and see how it goes.

[dmclean156]

Thanks for all the advice folks.

[Chrissie]

Hello & welcome dmclean156

[Roscopecotrain]

Sept 20, 2013 8:35:56 GMT dmclean156 said:

Thanks for all the advice folks.

No probs. Feel free to ask away if you hsve anymore.

Sent from my Galaxy Note 2

[jakethevape]

Sept 20, 2013 8:35:56 GMT dmclean156 said:

Thanks for all the advice folks.

Ello and welcome

Plenty of good advice on here, some good people.

Hopefully see you about another time.