Ohms for iclear 16 heads

[jaysey]

Looking on Myepack at heads and there's 1.5 and 2.1 heads , it says 2.1 for variables and 1.5 for basic ie egos , I use non variables but the iclears I have are 2 ohms and work fab ! Waiting for some from fasttech but was going to order a few in the meantime .... Which ones ???

[barrynorton]

If you're happy with the results with 2.1 ohms why change?

[jaysey]

Sept 25, 2013 19:08:18 GMT barrynorton said:

If you're happy with the results with 2.1 ohms why change?

Might be even better ?

[Perpetua]

Some of each . . . you know you've made the right choice then Jay.

[OneDay]

jaysey I'm not sure what batteries you use. Don't put anything under 2.0 ohms on a Riva battery, the extra heat generated can damage them.

[jaysey]

Sept 25, 2013 20:50:53 GMT OneDay said:

jaysey I'm not sure what batteries you use. Don't put anything under 2.0 ohms on a Riva battery, the extra heat generated can damage them.

Just using ego t 1100 and 910 s

[OneDay]

Sept 25, 2013 21:00:23 GMT jaysey said:

Sept 25, 2013 20:50:53 GMT OneDay said:

jaysey I'm not sure what batteries you use. Don't put anything under 2.0 ohms on a Riva battery, the extra heat generated can damage them.

Just using ego t 1100 and 910 s

You'll be ok with either then

[jaysey]

Sept 25, 2013 21:05:02 GMT OneDay said:

Sept 25, 2013 21:00:23 GMT jaysey said:

Just using ego t 1100 and 910 s

You'll be ok with either then

Thanks

[jaysey]

Sept 25, 2013 21:05:02 GMT OneDay said:

Sept 25, 2013 21:00:23 GMT jaysey said:

Just using ego t 1100 and 910 s

You'll be ok with either then

What difference to the vape does it make?

[barrynorton]

Should be hotter and produce more vapour, but will run down your battery faster, the coils will wear out faster and there's more chance of having a burnt flavour (which without VV you can't correct). Also increases the chance of a dry hit, but iClears aren't so bad for this.

[jaysey]

Sept 26, 2013 7:56:28 GMT barrynorton said:

Should be hotter and produce more vapour, but will run down your battery faster, the coils will wear out faster and there's more chance of having a burnt flavour (which without VV you can't correct). Also increases the chance of a dry hit, but iClears aren't so bad for this.

is this for the 1.5 or 2.1

[Super-Shiny]

jaysey stick too 2.1...safer option and a good all rounder

[jaysey]

Sept 26, 2013 8:25:39 GMT Super-Shiny said:

jaysey stick too 2.1...safer option and a good all rounder

I will thanks so much ! Love this forum !

[barrynorton]

Sept 26, 2013 8:23:10 GMT jaysey said:

Sept 26, 2013 7:56:28 GMT barrynorton said:

Should be hotter and produce more vapour, but will run down your battery faster, the coils will wear out faster and there's more chance of having a burnt flavour (which without VV you can't correct). Also increases the chance of a dry hit, but iClears aren't so bad for this.

is this for the 1.5 or 2.1

1.5. At a fixed(-ish) voltage a lower resistance means more current, which means more power. That's a good and a bad thing (which modders pursue to the extreme with sub-ohm coils).

[charon]

jaysey

to honest, not a fan of the I16 ( awaits for crys of condemnation), but I have found that for everyday normal usage 2.1 ish works fine, adequate vape, flavour and battery life..

using Mini protank, Evods and even some cheap plastic clones on Ego batts out and about.